Linux errno

Linux/include/uapi/asm-generic/errno-base.h
#ifndef _ASM_GENERIC_ERRNO_BASE_H
#define _ASM_GENERIC_ERRNO_BASE_H

#define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Argument list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */

#endif

Linux/include/uapi/asm-generic/errno.h
#ifndef _ASM_GENERIC_ERRNO_H
#define _ASM_GENERIC_ERRNO_H

#include <asm-generic/errno-base.h>

#define EDEADLK 35 /* Resource deadlock would occur */
#define ENAMETOOLONG 36 /* File name too long */
#define ENOLCK 37 /* No record locks available */

/*
* This error code is special: arch syscall entry code will return
* -ENOSYS if users try to call a syscall that doesn‘t exist. To keep
* failures of syscalls that really do exist distinguishable from
* failures due to attempts to use a nonexistent syscall, syscall
* implementations should refrain from returning -ENOSYS.
*/
#define ENOSYS 38 /* Invalid system call number */

#define ENOTEMPTY 39 /* Directory not empty */
#define ELOOP 40 /* Too many symbolic links encountered */
#define EWOULDBLOCK EAGAIN /* Operation would block */
#define ENOMSG 42 /* No message of desired type */
#define EIDRM 43 /* Identifier removed */
#define ECHRNG 44 /* Channel number out of range */
#define EL2NSYNC 45 /* Level 2 not synchronized */
#define EL3HLT 46 /* Level 3 halted */
#define EL3RST 47 /* Level 3 reset */
#define ELNRNG 48 /* Link number out of range */
#define EUNATCH 49 /* Protocol driver not attached */
#define ENOCSI 50 /* No CSI structure available */
#define EL2HLT 51 /* Level 2 halted */
#define EBADE 52 /* Invalid exchange */
#define EBADR 53 /* Invalid request descriptor */
#define EXFULL 54 /* Exchange full */
#define ENOANO 55 /* No anode */
#define EBADRQC 56 /* Invalid request code */
#define EBADSLT 57 /* Invalid slot */

#define EDEADLOCK EDEADLK

#define EBFONT 59 /* Bad font file format */
#define ENOSTR 60 /* Device not a stream */
#define ENODATA 61 /* No data available */
#define ETIME 62 /* Timer expired */
#define ENOSR 63 /* Out of streams resources */
#define ENONET 64 /* Machine is not on the network */
#define ENOPKG 65 /* Package not installed */
#define EREMOTE 66 /* Object is remote */
#define ENOLINK 67 /* Link has been severed */
#define EADV 68 /* Advertise error */
#define ESRMNT 69 /* Srmount error */
#define ECOMM 70 /* Communication error on send */
#define EPROTO 71 /* Protocol error */
#define EMULTIHOP 72 /* Multihop attempted */
#define EDOTDOT 73 /* RFS specific error */
#define EBADMSG 74 /* Not a data message */
#define EOVERFLOW 75 /* Value too large for defined data type */
#define ENOTUNIQ 76 /* Name not unique on network */
#define EBADFD 77 /* File descriptor in bad state */
#define EREMCHG 78 /* Remote address changed */
#define ELIBACC 79 /* Can not access a needed shared library */
#define ELIBBAD 80 /* Accessing a corrupted shared library */
#define ELIBSCN 81 /* .lib section in a.out corrupted */
#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
#define ELIBEXEC 83 /* Cannot exec a shared library directly */
#define EILSEQ 84 /* Illegal byte sequence */
#define ERESTART 85 /* Interrupted system call should be restarted */
#define ESTRPIPE 86 /* Streams pipe error */
#define EUSERS 87 /* Too many users */
#define ENOTSOCK 88 /* Socket operation on non-socket */
#define EDESTADDRREQ 89 /* Destination address required */
#define EMSGSIZE 90 /* Message too long */
#define EPROTOTYPE 91 /* Protocol wrong type for socket */
#define ENOPROTOOPT 92 /* Protocol not available */
#define EPROTONOSUPPORT 93 /* Protocol not supported */
#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT 96 /* Protocol family not supported */
#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
#define EADDRINUSE 98 /* Address already in use */
#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
#define ENETDOWN 100 /* Network is down */
#define ENETUNREACH 101 /* Network is unreachable */
#define ENETRESET 102 /* Network dropped connection because of reset */
#define ECONNABORTED 103 /* Software caused connection abort */
#define ECONNRESET 104 /* Connection reset by peer */
#define ENOBUFS 105 /* No buffer space available */
#define EISCONN 106 /* Transport endpoint is already connected */
#define ENOTCONN 107 /* Transport endpoint is not connected */
#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS 109 /* Too many references: cannot splice */
#define ETIMEDOUT 110 /* Connection timed out */
#define ECONNREFUSED 111 /* Connection refused */
#define EHOSTDOWN 112 /* Host is down */
#define EHOSTUNREACH 113 /* No route to host */
#define EALREADY 114 /* Operation already in progress */
#define EINPROGRESS 115 /* Operation now in progress */
#define ESTALE 116 /* Stale file handle */
#define EUCLEAN 117 /* Structure needs cleaning */
#define ENOTNAM 118 /* Not a XENIX named type file */
#define ENAVAIL 119 /* No XENIX semaphores available */
#define EISNAM 120 /* Is a named type file */
#define EREMOTEIO 121 /* Remote I/O error */
#define EDQUOT 122 /* Quota exceeded */

#define ENOMEDIUM 123 /* No medium found */
#define EMEDIUMTYPE 124 /* Wrong medium type */
#define ECANCELED 125 /* Operation Canceled */
#define ENOKEY 126 /* Required key not available */
#define EKEYEXPIRED 127 /* Key has expired */
#define EKEYREVOKED 128 /* Key has been revoked */
#define EKEYREJECTED 129 /* Key was rejected by service */

/* for robust mutexes */
#define EOWNERDEAD 130 /* Owner died */
#define ENOTRECOVERABLE 131 /* State not recoverable */

#define ERFKILL 132 /* Operation not possible due to RF-kill */

#define EHWPOISON 133 /* Memory page has hardware error */

#endif

Linux/include/linux/errno.h
#ifndef _LINUX_ERRNO_H
#define _LINUX_ERRNO_H

#include <uapi/linux/errno.h>

/*
* These should never be seen by user programs. To return one of ERESTART*
* codes, signal_pending() MUST be set. Note that ptrace can observe these
* at syscall exit tracing, but they will never be left for the debugged user
* process to see.
*/
#define ERESTARTSYS 512
#define ERESTARTNOINTR 513
#define ERESTARTNOHAND 514 /* restart if no handler.. */
#define ENOIOCTLCMD 515 /* No ioctl command */
#define ERESTART_RESTARTBLOCK 516 /* restart by calling sys_restart_syscall */
#define EPROBE_DEFER 517 /* Driver requests probe retry */
#define EOPENSTALE 518 /* open found a stale dentry */

/* Defined for the NFSv3 protocol */
#define EBADHANDLE 521 /* Illegal NFS file handle */
#define ENOTSYNC 522 /* Update synchronization mismatch */
#define EBADCOOKIE 523 /* Cookie is stale */
#define ENOTSUPP 524 /* Operation is not supported */
#define ETOOSMALL 525 /* Buffer or request is too small */
#define ESERVERFAULT 526 /* An untranslatable error occurred */
#define EBADTYPE 527 /* Type not supported by server */
#define EJUKEBOX 528 /* Request initiated, but will not complete before timeout */
#define EIOCBQUEUED 529 /* iocb queued, will get completion event */
#define ERECALLCONFLICT 530 /* conflict with recalled state */

#endif

时间: 2024-10-22 09:00:54

Linux errno的相关文章

Linux errno错误对照表

errno 在 <errno.h> 中定义,错误 Exx 的宏定义在 /usr/include/asm-generic 文件夹下面的  errno-base.h 和 errno.h,分别定义了 1-34 .35-132 的错误定义. strerror() 函数依据 errno 值返回错误描述字符串,下面程序打印对照表: [cpp] view plain copy #include <errno.h> #include <string.h> #include <st

linux errno使用

errno详解 http://blog.csdn.net/wang_517766334/article/details/7561495 #include <errno.h> 就可以直接打印当前errno的值,查询错误

Linux设备驱动中的阻塞和非阻塞I/O

[基本概念] 1.阻塞 阻塞操作是指在执行设备操作时,托不能获得资源,则挂起进程直到满足操作所需的条件后再进行操作.被挂起的进程进入休眠状态(不占用cpu资源),从调度器的运行队列转移到等待队列,直到条件满足. 2.非阻塞 非阻塞操作是指在进行设备操作是,若操作条件不满足并不会挂起,而是直接返回或重新查询(一直占用CPU资源)直到操作条件满足为止. 当用户空间的应用程序调用read(),write()等方法时,若设备的资源不能被获取,而用户又希望以阻塞的方式来访问设备,驱动程序应当在设备驱动层的

Linux设备文件自动生成

第一种是使用mknod手工创建:# mknod <devfilename> <devtype> <major> <minor> 第二种是自动创建设备节点:利用udev(mdev)来实现设备文件的自动创建,首先应保证支持udev(mdev),由busybox配置. 具体udev相关知识这里不详细阐述,可以移步Linux 文件系统与设备文件系统 -- udev 设备文件系统,这里主要讲使用方法. 在驱动用加入对udev 的支持主要做的就是:在驱动初始化的代码里调

linux内核debug的一种方式:procfs

1 #include <linux/module.h> 2 3 #include <linux/compat.h> 4 #include <linux/types.h> 5 #include <linux/errno.h> 6 #include <linux/kernel.h> 7 #include <linux/major.h> 8 #include <linux/slab.h> 9 #include <linux

Smart210学习记录------linux串口驱动

转自:http://blog.chinaunix.net/xmlrpc.php?r=blog/article&uid=27025492&id=327609 一.核心数据结构 串口驱动有3个核心数据结构,它们都定义在<#include linux/serial_core.h> 1.uart_driver uart_driver包含了串口设备名.串口驱动名.主次设备号.串口控制台(可选)等信息,还封装了tty_driver(底层串口驱动无需关心tty_driver). struct

linux 字符设备驱动开发详解

一.设备的分类及特点 1.字符设备 字符设备是面向数据流的设备,没有请求缓冲区,对设备的存取只能按顺序按字节的存取而不能随机访问.    Linux下的大多设备都是字符设备.应用程序是通过字符设备节点来访问字符设备的.通常至少需要实现 open, close, read, 和 write 等系统调用.    设备节点一般都由mknod命令都创建在/dev目录下,包含了设备的类型.主/次设备号以及设备的访问权限控制等,如:crw-rw----  1 root  root 4, 64 Feb 18

linux设备驱动程序该添加哪些头文件以及驱动常用头文件介绍(转)

原文链接:http://blog.chinaunix.net/uid-22609852-id-3506475.html 驱动常用头文件介绍 #include <linux/***.h> 是在linux-2.6.29/include/linux下面寻找源文件.#include <asm/***.h> 是在linux-2.6.29/arch/arm/include/asm下面寻找源文件.#include <mach/***.h> 是在linux-2.6.29/arch/ar

Linux GPIO操作分析 - Exynos 5260

送给从STM32库或者其他单片机爬过来的熊孩纸 操作GPIO还是这个顺序: 1:开时钟(linux不用管) 2:设置属性 3:设置方向 4:看是否需要设置上下拉 我这个版本是exynos5260平台的,常规IO操作方式如下 通常在配置一个GPIO口时,首先通过gpio_request函数申请GPIO口,再通过s3c_gpio_cfgpin.s3c_gpio_setpull.gpio_set_value函数配置GPIO口,在不用时通过gpio_free函数释放GPIO口. 相关源码路径: /* k