When ethernet-switching family is configured on an interface

juniper SRX 保存文档报错如下：

[edit interfaces ge-0/0/1 unit 0]

‘family‘

When ethernet-switching family is configured on an interface, no other family type can be configured on the same interface.

error: configuration check-out failed

解决办法:

在配置三层接口的时候，要先删除二层接口：

edit interfaces ge-0/0/0 unit 0

delete family ethernet-switching

再去：commit

时间： 2024-08-14 21:37:25

When ethernet-switching family is configured on an interface的相关文章

Smart internet of things services

A method and apparatus enable Internet of Things (IoT) services based on a SMART IoT architecture by integrating connectivity, content, cognition, context, cloud, and collaboration. Joint optimization of a combination of any of connectivity, content,

关于RFC2544中的Cut-Through和Store-and-Forward模式

Layer 2 Forwarding Both store-and-forward and cut-through Layer 2 switches base their forwarding decisions on the destination MAC address of data packets. They also learn MAC addresses as they examine the source MAC (SMAC) fields of packets as statio

Computer Network学习笔记_5

4-1_Network_Layer_Overview 一个知识点:routing和forwarding的区别.Routing is the process of deciding in which direction to send traffic-Network wide(global)and expensive.Forwarding is the process of sending a packet on its way-Node process(local) and fast. 因为网络

Lab - Hot Standby Router Protocol

Topology Objective Configure inter-VLAN routing with HSRP to provide redundant, fault-tolerant routing to the internal network. Background Hot Standby Router Protocol (HSRP) is a Cisco-proprietary redundancy protocol for establishing a fault-tolerant

Methods and systems for sharing common job information

Apparatus and methods are provided for utilizing a plurality of processing units. A method comprises selecting a pending job from a plurality of unassigned jobs based on a plurality of assigned jobs for the plurality of processing units and assigning

Inter-partition communication in multi-core processor

A multi-core processor includes logical partitions that have respective processor cores, memory areas, and Ethernet controllers. At least one of the Ethernet controllers is disabled for external communication and is assigned as an inter-partition Eth

l 交换机的密码恢复

l 交换机的密码恢复具体步骤: 1. 拔掉交换机的插头因为交换机没有电源开关,所以只能切断电源来重启交换机. 2. 重新插好电源后,立刻按住交换机上的"mode" 键,当看到配置界面显示"switch:"命令提示,便可松开"mode"键.这表示已经进入到一个专门用来做故障恢复的简单IOS,由于没有密码,正常的IOS无法进入,所以只能先在这里做一些参数设定.如图所示: 3. 使用上面提示的命令"flash_init"初始化F

c#网络通信框架networkcomms内核解析之十一 TCP连接与UDP连接

连接是通信的核心客户端一般只会有一个连接服务器端会维护成千上万的连接在服务器端连接的维护工作是由NetworkComms静态类来完成的,当有新的客户端请求,服务器上会创建相应的连接,并把连接注册到NetworkComms静态类中.当连接断开后,NetworkComms通信框架会自动把相应连接的引用从NetworkComms静态类中删除. 连接的类图: 在V3以上版本中,数据监听部分已从Connnection类中提取出去成为一个单独的类: TCPConnectionListener ,使

hbase官方文档(转)

Apache HBase™ 参考指南 HBase 官方文档中文版 Copyright © 2012 Apache Software Foundation.保留所有权利. Apache Hadoop, Hadoop, MapReduce, HDFS, Zookeeper, HBase 及 HBase项目 logo 是Apache Software Foundation的商标. Revision History Revision 0.95-SNAPSHOT 2012-12-03T13:38 中文版