ping: sendto: No route to host

[email protected]:/home/ # ping www.baidu.com
PING www.a.shifen.com (61.135.169.125): 56 data bytes
ping: sendto: No route to host
ping: sendto: No route to host
ping: sendto: No route to host
ping: sendto: No route to host
ping: sendto: No route to host
ping: sendto: No route to host

解决办法

emacs /etc/rc.conf

hostname="tuhooo"
ifconfig_em0="inet 192.168.31.130 netmask 255.255.255.0"
ifconfig_em0_ipv6="inet6 accept_rtadv"
 defaultrouter="192.168.31.2" # 设置默认网关                                         
sshd_enable="YES"
ntpd_enable="YES"
# Set dumpdev to "AUTO" to enable crash dumps, "NO" to disable                      
dumpdev="AUTO"
 
ntpdate_enable="YES"

ntpdate_program="ntpdate"
ntpdate_flags="0.cn.pool.ntp.org"

mysql_enable="YES"

时间： 2024-09-29 15:25:25

ping: sendto: No route to host的相关文章

mac ping: sendto: Host is down PING不通别人的ip，可以ping通路由器  

mac ping: sendto: Host is down PING不通别人的ip,可以ping通路由器 PING 192.168.1.131 (192.168.1.131): 56 data bytesRequest timeout for icmp_seq 0Request timeout for icmp_seq 1Request timeout for icmp_seq 2Request timeout for icmp_seq 3ping: sendto: No route to h

ping: sendto: Network is unreachable

在我的板子上ping路由上的IP的时候可以ping通,但是ping外网的IP的时候提示"ping: sendto: Network is unreachable" 后来使用route命令看了一下 # route Kernel IP routing table Destination     Gateway         Genmask         Flags Metric Ref    Use Iface 192.168.1.0     *               255.2

zabbix-server报错：No route to host

前戏: 我在VM虚拟机中创建了2个liunx系统(rhel7和cent7),一个用作zabbix服务端,另一个用作zabbix客户端.但是用服务端监控客户端时图标是红色的监控不了,报错信息为:Get value from agent failed: cannot connect to [[客户端的IP]:10050]: [113] No route to host 报警意思大致为主机无法被监听 linux版本:centos 7 zabbix版本:zabbix 3 解决方法: (1)使用ping命

NFS服务器出现：clnt_create:RPC:Port mapper failure - Unable to receive:errno 113(No route to host)

配置环境是服务器CO7-S:192.168.132.88,客户端CE6.8:192.168.132.111 NFS服务器已经配置好,如图: Iptables已经关闭,如图: 但是,当使用命令showmount -e 192.168.132.88时,会出现提示:clnt_create:RPC:Port mapper failure - Unable to receive:errno 113(No route to host) 如图: 其实,还是服务器的设置问题,安装了桌面的服务器端可以这样设置防火

linux网络编程 no route to host 解决方案

linux网络编程 no route to host 解决方案 [整合资料] (2013-05-13 21:38:12) 转载▼ 标签: net iptables it 分类: Linux 参考资料http://1413570.blog.51cto.com/1403570/792861http://2614223.blog.51cto.com/2604223/764757 在vmvare里面配了两台mysql,发现用mysql连不上mysql服务器,用telnet登录mysql的3306端口,发

CentOS下配置Hadoop集群：java.net.NoRouteToHostException: No route to host问题的解决

我用的是hadoop 1.2.1 遇到的问题是: hadoop中datanode无法启动,报Caused by: java.net.NoRouteToHostException: No route to host 2013-06-11 02:22:13,637 INFO org.apache.hadoop.hdfs.server.datanode.DataNode: STARTUP_MSG: /***************************************************

ios10 no route to host

IdTCPClient1 ios10 no route to host IOS 9 正常 IOS10 出错,参考下面的设置解决问题 http://www.sh-huhe.com/solution/141.html 设置>网络>允许 app访问网络. ios10.0.2 使用无线局域网与蜂窝移动的应用 给界面上放一个browse控件,打开程序的时候就会有提示,是否允许访问网络.

gluster添加节点失败报错：No route to host

glusterfs 3.4.7和gluster3.6.4都会出现该问题. 服务器端执行添加peer命令报如下错误: Probe returned with unknown errno 107 对应日志错误信息如下: [2015-08-25 02:47:06.818281] I [glusterd-handler.c:1031:__glusterd_handle_cli_probe] 0-glusterd: Received CLI probe req node61 24007[2015-08-2

“Connection refused” vs “No route to host”

曾经在http://blog.csdn.net/bisal/article/details/42496583这篇博文中提到一个端口连接的验证: "[email protected]$telnet 172.101.19.57 1521Trying 172.101.19.57...telnet: connect to address 172.101.19.57: No route to host如果端口未开,实际报错:[email protected]$telnet 172.27.19.56 152