公司新项目要在linux下部署，搭建一下java运行环境，记录一下。
一、安装mysql
1去官网下载mysql，下载后并解压，我把mysql安装在/usr/local/mysql路径下
tar -zxvf mysql-5.7.11-linux-glibc2.5-x86_64.tar.gz -C /usr/local/mysql
2进入mysql目录，建立data文件夹
[[email protected] local]# cd /usr/local/mysql [[email protected] mysql]# mkdir data
3新建不能登陆的mysql用户
useradd -r -M -s /sbin/nologin mysql
4修改mysql目录所有者为mysql用户和mysql组
chown -R mysql.mysql /usr/local/mysql chgrp -R mysql /usr/local/mysql
5进入/usr/local/mysql目录，初始化mysql，后面那个是初始密码，要记住
bin/mysqld --initialize --user=mysql --basedir=/usr/local/mysql --datadir=/usr/local/mysql/data
6复制my.cnf文件，并修改/etc/my.cnf
cp /usr/local/mysql/support-files/my-default.cnf /etc/my.cnf
# These are commonly set, remove the # and set as required. basedir = /usr/local/mysql datadir = /usr/local/mysql/data port = 3306 character-set-server=utf8 collation-server=utf8_general_ci default-storage-engine=INNODB #server_id = ..... # socket = .....
7进行mysql.support-files目录，复制mysql.server到/etc/init.d/mysqld，加入开机运行
[[email protected] mysql]# cd support-files/
[[email protected] support-files]# cp mysql.server /etc/init.d/mysqld
[[email protected] support-files]# chmod +x /etc/init.d/mysqld
[[email protected] support-files]# chkconfig --add mysqld
查看是否成功
chkconfig --list mysqld
8mysql加入环境变量
vi /etc/profile #把mysql服务加入系统环境变量：在最后添加下面这一行 export PATH=$PATH:/usr/local/mysql/bin :wq! #保存退出 source /etc/profile #使配置立刻生效
9登录后修改密码
[[email protected] tmp]# service mysqld start Starting MySQL. SUCCESS! [[email protected] tmp]# mysql -uroot -p Enter password: mysql> SET PASSWORD = PASSWORD(‘123456‘); mysql> flush privileges;
二jdk安装
1下载jdk，解压并移动到安装路径
tar -zxvfjdk-8u73-linux-x64.tar.gz -C /usr/local/jdk8
2加入环境变量
vi /etc/profile # 在export PATH USER LOGNAME MAIL HOSTNAME HISTSIZE HISTCONTROL下添加 export JAVA_HOME=/usr/local/jdk8 export PATH=$JAVA_HOME/bin:$PATH export CLASSPATH=.:$JAVA_HOME/lib/dt.jar:$JAVA_HOME/lib/tools.jar#保存后，执行source /etc/profile使其生效
3验证是否成功java -vsersion
三安装tomcat
1解压并安装到指定路径
?
|
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 |
|
2将8080端口添加到防火墙例外并重启
?
|
1 2 |
|
3访问http://ip/8080
四安装nginx
安装nginx前，前提是安装了gcc-c++,还要安装一些依赖库
1安装perl
mkdir /usr/local/perl cd perl5.22 ./Configure -des -Dprefix=/usr/local/ perl -Dusethreads -Uversiononly make make test make install
2安装pcre
mkdir /usr/local/pcre tar zxvf pcre-8.35.tar.gz cd pcre-8.35 ./configure --prefix=/usr/local/pcre make make install
3安装openssl
mkdir /usr/local/openssl tar zxvf openssl-1.0.1h.tar.gz cd openssl-1.0.1h ./config --prefix=/usr/local/openssl make make install vi /etc/profile export PATH=$PATH:/usr/local/openssl/bin :wq! source /etc/profile
4安装zlib
mkdir /usr/local/zlib tar zxvf zlib-1.2.8.tar.gz cd zlib-1.2.8 ./configure --prefix=/usr/local/lib/zlib make make install
5安装nginx
#添加用户和用户级 groupadd nginx useradd -g nginx nginx -s /bin/false mkdir /usr/local/nginx tar zxvf nginx-1.6.0.tar.gz cd nginx-1.6.0 ./configure --prefix=/usr/local/nginx --without-http_memcached_module --user=nginx --group=nginx --with-http_stub_status_module --with-http_ssl_module --with-http_gzip_static_module --with-openssl=/root/tool/openssl-1.0.2g/ --with-zlib=/root/tool/zlib-1.2.8/ --with-pcre=/root/tool/pcre-8.37 #注意：--with-openssl=/usr/local/src/openssl-1.0.1h --with-zlib=/usr/local/src/zlib-1.2.8 --with-pcre=/usr/local/src/pcre-8.35指向的是源码包解压的路径，而不是安装的路径，否则会报错 make make install
6
#添加80端口到防火墙 firewall-cmd --zone=public --add-port=80/tcp --permanent firewall-cmd --reload #启动nginx /usr/local/nginx/sbin/nginx
nginx -s reload ：修改配置后重新加载生效
nginx -s reopen ：重新打开日志文件
nginx -t -c /path/to/nginx.conf 测试nginx配置文件是否正确
关闭nginx：
nginx -s stop :快速停止nginx
quit ：完整有序的停止nginx
其他的停止nginx 方式：
ps -ef | grep nginx
kill -QUIT 主进程号 ：从容停止Nginx
kill -TERM 主进程号 ：快速停止Nginx
pkill -9 nginx ：强制停止Nginx
启动nginx:
nginx -c /path/to/nginx.conf
平滑重启nginx：
kill -HUP 主进程号
7设置nginx开机启动
vi /etc/init.d/nginxd #编辑启动文件添加下面内容
#!/bin/bash
#
#chkconfig: - 85 15
#description: Nginx is a World Wide Web server.
#processname: nginx
nginx=/usr/local/nginx/sbin/nginx
conf=/usr/local/nginx/conf/nginx.conf
case $1 in
start)
echo -n "Starting Nginx"
$nginx -c $conf
echo " done"
;;
stop)
echo -n "Stopping Nginx"
killall -9 nginx
echo " done"
;;
test)
$nginx -t -c $conf
;;
reload)
echo -n "Reloading Nginx"
ps auxww | grep nginx | grep master | awk ‘{print $2}‘ | xargs kill -HUP
echo " done"
;;
restart)
$0 stop
$0 start
;;
show)
ps -aux|grep nginx
;;
*)
echo -n "Usage: $0 {start|restart|reload|stop|test|show}"
;;
esac
:wq! #保存退出
注意(centos7没有killall命令，要先安装，yum install psmisc)
chmod +x /etc/init.d/nginxd #赋予文件执行权限
chkconfig --add nginxd#添加到服务
chkconfig nginxd on #设置开机启动
/etc/init.d/nginxd restart #重启
8nginx和tomcat整合，修改nginx配置文件
server
{
listen 80;
server_name localhost;
index index.html index.htm index.jsp;#设定访问的默认首页地址
root /home/www/web/ROOT;#设定网站的资源存放路径
#limit_conn crawler 20;
location / {
index index.html index.jsp;
}
location ~ .*.jsp$ #所有jsp的页面均交由tomcat处理
{
index index.jsp;
proxy_pass http://192.168.222.128:8080;#转向tomcat处理
}
location ~ .*\.(gif|jpg|jpeg|png|bmp|swf)$ #设定访问静态文件直接读取不经过tomcat
{
expires 30d;
}
location ~ .*\.(js|css)?$
{
expires 1h;
}
#定义访问日志的写入格式
#log_format access ‘$remote_addr - $remote_user [$time_local] "$request" ‘
#‘$status $body_bytes_sent "$http_referer" ‘
#‘"$http_user_agent" $http_x_forwarded_for‘;
#access_log /usr/local/nginx/logs/localhost.log access;#设定访问日志的存放路径
}
原文地址：https://www.cnblogs.com/jpfss/p/10089138.html