rac安装grid报INS-41112错误

原创作品,出自 “深蓝的blog” 博客,欢迎转载,转载时请务必注明下面出处,否则追究版权法律责任。

深蓝的blog:http://blog.csdn.net/huangyanlong/article/details/40782379

CentOS6.4下安装Oracle11G集群

前提:使用图形化完毕ssh配置,例如以下图:

错误现象:

安装grid软件时报错INS-41112错误,例如以下图所看到的:

两节点进行ping測试。分别ping“公有IP”和“私有IP”,两节点ping通正常后,按例如以下方式配置:

1、两节点进行SSH验证

节点1:

[[email protected] ~]$ ssh rac2priv date

--验证节点2私有IP

The authenticity of host ‘rac2priv (192.168.56.73)‘ can‘t be established.

RSA key fingerprint is a3:ab:da:a3:f1:0a:40:02:97:0c:96:2b:ad:43:60:b7.

Are you sure you want to continue connecting (yes/no)?

yes

Warning: Permanently added ‘rac2priv,192.168.56.73‘ (RSA) to the list of known hosts.

Wed Oct 29 17:04:12 CST 2014

[[email protected] ~]$ ssh rac2priv date

Wed Oct 29 17:04:14 CST 2014

[[email protected] ~]$ ssh rac1priv date

--验证节点1私有IP

The authenticity of host ‘rac1priv (192.168.56.72)‘ can‘t be established.

RSA key fingerprint is 48:3b:19:c1:d6:5d:fb:9e:32:09:3a:82:4f:2e:ad:81.

Are you sure you want to continue connecting (yes/no)? yes

Warning: Permanently added ‘rac1priv,192.168.56.72‘ (RSA) to the list of known hosts.

Wed Oct 29 16:40:47 CST 2014

[[email protected] ~]$ ssh rac1priv date

Wed Oct 29 16:40:48 CST 2014

[[email protected] ~]$ ssh test1 date

--验证节点1公有IP

Wed Oct 29 17:04:14 CST 2014

[[email protected] ~]$ ssh test2 date

--验证节点2公有IP

Wed Oct 29 17:04:14 CST 2014

节点2:

[[email protected] ~]$ ssh rac1priv date

The authenticity of host ‘rac1priv (192.168.56.72)‘ can‘t be established.

RSA key fingerprint is 48:3b:19:c1:d6:5d:fb:9e:32:09:3a:82:4f:2e:ad:81.

Are you sure you want to continue connecting (yes/no)? yes

Warning: Permanently added ‘rac1priv,192.168.56.72‘ (RSA) to the list of known hosts.

Wed Oct 29 16:41:59 CST 2014

[[email protected] ~]$ ssh rac1priv date

Wed Oct 29 16:42:01 CST 2014

[[email protected] ~]$ ssh rac2priv date

The authenticity of host ‘rac2priv (192.168.56.73)‘ can‘t be established.

RSA key fingerprint is a3:ab:da:a3:f1:0a:40:02:97:0c:96:2b:ad:43:60:b7.

Are you sure you want to continue connecting (yes/no)? yes

Warning: Permanently added ‘rac2priv,192.168.56.73‘ (RSA) to the list of known hosts.

Wed Oct 29 17:05:47 CST 2014

[[email protected] ~]$ ssh rac2priv date

Wed Oct 29 17:05:48 CST 2014

[[email protected] ~]$ ssh rac1priv date

Wed Oct 29 16:46:32 CST 2014

[[email protected] ~]$ ssh test1 date

--验证节点1公有IP

Wed Oct 29 16:46:48 CST 2014

[[email protected] ~]$ ssh test2 date

--验证节点2公有IP

Wed Oct 29 17:10:46 CST 2014

2、在两个节点上关闭不必要的服务

节点1:

[[email protected] /]# chkconfig NetworkManager off

[[email protected] /]# sed -i ‘s/SELINUX=enforcing/SELINUX=disabled/‘ /etc/selinux/config

[[email protected] /]# chkconfig iptables off

节点2:

[[email protected] ~]# chkconfig NetworkManager off

[[email protected] ~]# sed -i ‘s/SELINUX=enforcing/SELINUX=disabled/‘ /etc/selinux/config

[[email protected] ~]# chkconfig iptables off

又一次运行grid安装,正常通过了。

原创作品。出自 “深蓝的blog” 博客,欢迎转载,转载时请务必注明下面出处,否则追究版权法律责任。

深蓝的blog:http://blog.csdn.net/huangyanlong/article/details/40782379

时间: 2024-08-03 06:42:24

rac安装grid报INS-41112错误的相关文章

Oracle 11gR2 RAC 安装Grid Infrastructure错误

Oracle 11gR2 RAC 安装Grid Infrastructure错误 系统环境: 操作系统:RedHat EL5 Cluster: Oracle GI(Grid Infrastructure) Oracle:  Oracle 11.2.0.1.0 如图所示:RAC 系统架构   对于Oracle 11G构建RAC首先需要构建GI(Grid Infrastructure)的架构 错误现象: 报:node2 检测用户信任关系错误,node2安装目录不可访问! 手工检测,node2与nod

Oracle 12C RAC安装grid时root.sh报错ORA-00845

Oracle 12C RAC安装grid时root.sh在二节点报错: CRS-2676: Start of 'ora.cssd' on 'prodb2' succeeded CRS-2672: Attempting to start 'ora.cluster_interconnect.haip' on 'prodb2' CRS-2672: Attempting to start 'ora.ctssd' on 'prodb2' CRS-2676: Start of 'ora.ctssd' on

CentOS6.2上安装Oracle10g报ins_emdb.mk错误处理方法

oracle安装过程报ins_emdb.mk错误,此时继续点击“continue”即可,待Oracle完成安装后,再手工执行相应脚本完成链接即可 在CentOS6.2操作系统上,安装Oracle10g时,报如下错误: 根据提示查看日志,并没发现帮助信息,如下所示: 复制代码代码如下: [[email protected] ~]# tail -f /u01/app/oracle/oraInventory/logs/installActions2014-09-20_02-43-00PM.log IN

windows安装oracle遇INS 30131 错误

win2008 64位安装oracle 11.2.0.4也遇到INS 30131 错误 描述: 原因 - 无法访问临时位置. 操作 - 请确保当前用户具有访问临时位置所需的权限. 附加信息: - 所有节点上的框架设置检查都失败 - 原因: 问题的原因不可用 - 操作: 用户操作不可用 失败节点概要 fweqtdbpormyrmy  - 无法从节点 "xxx" 检索 exectask 的版本 - 原因: 问题的原因不可用 - 操作: 用户操作不可用 搜了一下,一般都是说要共享c$, &q

windows linux 下安装mysql 报1045 等错误

曾经在windows 下安装mysql 没怎么出现过问题.而在linux下安装的时候出现了一些问题,昨天在windows 安装的时候也出现了1045 错误.就个人经历来看这个问题就是 root用户password的问题,所以将解决的方式总结例如以下: 一.mysql登录报 1045 错误 mysqladmin: connect to server at 'localhost' failed error: 'Access denied for user 'root'@'localhost' (us

win7安装oracle11g报无法创建目录错误

原创作品,出自 "深蓝的blog" 博客,欢迎转载,转载时请务必注明以下出处,否则追究版权法律责任. 深蓝的blog:http://blog.csdn.net/huangyanlong/article/details/43448151 环境:win7 32bit 旗舰版客户安装管理PC 目标:为客户搭建一个练习环境,使用oracle11g 错误过程: 1.安装oracle11g软件,成功: 2.dbca建库,点击创建数据库后,报"无法创建目录"错误,如下图所示: 解

oracle 11g RAC安装节点二执行结果错误CRS-5005: IP Address: 192.168.1.24 is already in use in the network

[[email protected] ~]# /u01/app/oraInventory/orainstRoot.sh Changing permissions of /u01/app/oraInventory. Adding read,write permissions for group. Removing read,write,execute permissions for world. Changing groupname of /u01/app/oraInventory to oins

oracle安装过程报ins_emdb.mk错误处理方法

***********************************************声明**********************************************  原创作品,出自 "深蓝的blog" 博客,欢迎转载,转载时请务必注明出处,否则追究版权法律责任. 表述有错误之处,请您留言或邮件([email protected])指明,不胜感激. 本文转载必须保留此处:http://blog.csdn.net/huangyanlong/article/det

centos 安装pcre报c++编译器错误

gcc已经安装了但是还报c++编译器不支持的错误. 于是找到如下组件安装: yum install gcc-c++ 再次安装pcre成功. 附:centos上源码安装gcc http://my.oschina.net/vaero/blog/210485 # issue: configure: error: C++ compiler missing or inoperational# 没有C++编译器yum install gcc-c++ # issue: conftest.cpp:11:2: e