安装ORACLE_RAC遇到的问题与解决方法

while running:

/u01/app/oracle/product/10.2.0/db_1/root.sh

Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
Setting the permissions on OCR backup directory
Setting up NS directories
PROT-1:Failedtoinitializeocrconfig
Failedto upgrade Oracle Cluster Registry configuration

dd if=/dev/zero f=/dev/rdsk/V1064_vote_01_20m.dbf bs=8192 count=2560
        dd if=/dev/zero f=/dev/rdsk/ocrV1064_100m.ora bs=8192 count=12800

解决方法1
Failedto upgrade Oracle Cluster Registry configuration
在安装CRS时,在第二个节点执行./root.sh时,出现如下提示,我在第一个节点执行正常.请大虾指点一些,不胜感激!谢谢!
[[email protected] crs]# ./root.sh
WARNING: directory ‘/app/oracle/product/10.2.0‘ is not owned by root
WARNING: directory ‘/app/oracle/product‘ is not owned by root
WARNING: directory ‘/app/oracle‘ is not owned by root
WARNING: directory ‘/app‘ is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
PROT-1:Failedtoinitializeocrconfig
Failedto upgrade Oracle Cluster Registry configuration
错误原因:
是因为安装crs的设备权限有问题,例如我的设备用raw来放置ocr和vote,此时要设置好这些硬件设备以及连接的文件的权限,下面是我的环境:
[[email protected] oracrs]#
lrwxrwxrwx 1 root root 13 Jan 27 12:49 ocr.crs -> /dev/raw/raw1
lrwxrwxrwx 1 root root 13 Jan 26 13:31 vote.crs -> /dev/raw/raw2
chown root:oinstall /dev/raw/raw1
chown root:oinstall /dev/raw/raw2
chmod 660 /dev/raw/raw1
chmod 660 /dev/raw/raw2
其中/dev/sdb1放置ocr,/dev/sdb2放置vote.
[[email protected] oracrs]# service rawdevices reload
Assigning devices:
           /dev/raw/raw1 -->   /dev/sdb1
/dev/raw/raw1: bound to major 8, minor 17
           /dev/raw/raw2 -->   /dev/sdb2
/dev/raw/raw2: bound to major 8, minor 18
Done
然后再次执行就ok了.
[[email protected] oracrs]# /oracle/app/oracle/product/crs/root.sh
WARNING: directory ‘/oracle/app/oracle/product‘ is not owned by root
WARNING: directory ‘/oracle/app/oracle‘ is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory ‘/oracle/app/oracle/product‘ is not owned by root
WARNING: directory ‘/oracle/app/oracle‘ is not owned by root
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
assigning default hostname rac1 for node 1.
assigning default hostname rac2 for node 2.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: rac1 priv1 rac1
node 2: rac2 priv2 rac2
clscfg: Arguments check out successfully.

Oracle
gave me a patch that allowed us to format the OCR and voting disk. Now
the problem may just be I need to run root.sh on node1 or wipe both
clean and start fresh.
Devices formatted, now we need to get the CRS daemon up and running on both nodes..
[[email protected] ~]# dd if=/dev/zero f=/dev/raw/raw2 bs=1048576 count=1000
1000+0 records in
1000+0 records out
[[email protected] ~]# /orahome/app/oracle/product/10.1.2.0.2/CRS/root.sh
WARNING: directory ‘/orahome/app/oracle/product/10.1.2.0.2‘ is not owned by root
WARNING: directory ‘/orahome/app/oracle/product‘ is not owned by root
WARNING: directory ‘/orahome/app/oracle‘ is not owned by root
WARNING: directory ‘/orahome/app‘ is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory ‘/orahome/app/oracle/product/10.1.2.0.2‘ is not owned by root
WARNING: directory ‘/orahome/app/oracle/product‘ is not owned by root
WARNING: directory ‘/orahome/app/oracle‘ is not owned by root
WARNING: directory ‘/orahome/app‘ is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: dr2db2 dr2db2-eth2 dr2db2
node 2: dr2db1 dr2db1-eth2 dr2db1
Creating OCR keys for user ‘root‘, privgrp ‘root‘..
Operation successful.
Now formatting voting device: /dev/raw/raw6
Format of 1 voting devices complete.
Startup will be queued to init within 90 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
CSS is active on these nodes.
dr2db2
CSS is inactive on these nodes.
dr2db1
Local node checking complete.
Run root.sh on remaining nodes to start CRS daemons.
[[email protected] ~]# ps -ef | grep ora
root 6572 2526 0 13:39 ? 00:00:00 sshd: oracle [priv]
oracle 6574 6572 0 13:39 ? 00:00:00 sshd: [email protected]/1
oracle 6575 6574 0 13:39 pts/1 00:00:00 -bash
root 14172 2526 0 17:54 ? 00:00:00 sshd: oracle [priv]
oracle 14176 14172 0 17:55 ? 00:00:00 sshd: [email protected]/2
oracle 14177 14176 0 17:55 pts/2 00:00:00 -bash
root
14682 1 0 17:57 ? 00:00:00 /bin/su -l oracle -c sh -c ‘ulimit -c
unlimited; cd
/orahome/app/oracle/product/10.1.2.0.2/CRS/log/dr2db2/evmd; exec
/orahome/app/oracle/product/10.1.2.0.2/CRS/bin/evmd ‘
root 14686 1 0 17:57 ? 00:00:00 /orahome/app/oracle/product/10.1.2.0.2/CRS/bin/crsd.bin reboot
oracle 14959 14682 0 17:58 ? 00:00:00 /orahome/app/oracle/product/10.1.2.0.2/CRS/bin/evmd.bin
root
15018 14942 0 17:58 ? 00:00:00 /bin/su -l oracle -c /bin/sh -c ‘ulimit
-c unlimited; cd
/orahome/app/oracle/product/10.1.2.0.2/CRS/log/dr2db2/cssd;
/orahome/app/oracle/product/10.1.2.0.2/CRS/bin/ocssd || exit $?‘
oracle
15021 15018 0 17:58 ? 00:00:00 /bin/sh -c ulimit -c unlimited; cd
/orahome/app/oracle/product/10.1.2.0.2/CRS/log/dr2db2/cssd;
/orahome/app/oracle/product/10.1.2.0.2/CRS/bin/ocssd || exit $?
oracle 15057 15021 0 17:58 ? 00:00:00 /orahome/app/oracle/product/10.1.2.0.2/CRS/bin/ocssd.bin
root 15996 14206 0 17:59 pts/2 00:00:00 grep ora
crs_setperm crs_setperm.bin crs_start crs_start.bin crs_stat crs_stat.bin crs_stop crs_stop.bin
[[email protected] ~]# /orahome/app/oracle/product/10.1.2.0.2/CRS/bin/crs_stat -t
CRS-0184: Cannot communicate with the CRS daemon.
on next node
[[email protected] ~]# /orahome/app/oracle/product/10.1.2.0.2/CRS/root.sh
WARNING: directory ‘/orahome/app/oracle/product/10.1.2.0.2‘ is not owned by root
WARNING: directory ‘/orahome/app/oracle/product‘ is not owned by root
WARNING: directory ‘/orahome/app/oracle‘ is not owned by root
WARNING: directory ‘/orahome/app‘ is not owned by root
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory ‘/orahome/app/oracle/product/10.1.2.0.2‘ is not owned by root
WARNING: directory ‘/orahome/app/oracle/product‘ is not owned by root
WARNING: directory ‘/orahome/app/oracle‘ is not owned by root
WARNING: directory ‘/orahome/app‘ is not owned by root
/orahome/app/oracle/product/10.1.2.0.2/CRS/bin/crsctl.bin:
error while loading shared libraries: libstdc++.so.5: cannot open
shared object file: No such file or directory
Failure initializing entries in /etc/oracle/scls_scr/dr2db1.
I think whats needed is a clean install.

http://www.puschitz.com/InstallingOracle10gRAC.shtml#CreatingPartitionsForRawDevices

在 node1 上执行：/opt/ora10g/product/10.2.0/crs_1/root.sh; 在 node2 上执行：/opt/ora10g/product/10.2.0/crs_1/root.sh;

通常在最后一个节点执行root.sh时会遇到错误，就我们的情况而言当然就是node2~~

提示：一般常见的错误有如下三种：

A).如果你碰到了这个错误：
/opt/ora10g/product/10.2.0/crs_1/jdk/jre//bin/java: error while loading shared libraries:  libpthread.so.0: cannot open shared object file: No such file or directory
可以按照如下方式解决：
===============================
修改vipca文件
[[email protected] opt]# vi /opt/ora10g/product/10.2.0/crs_1/bin/vipca
找到如下内容： 
       Remove this workaround when the bug 3937317 is fixed 
       arch=`uname -m` 
       if [ "$arch" = "i686" -o "$arch" = "ia64" ] 
       then 
            LD_ASSUME_KERNEL=2.4.19 
            export LD_ASSUME_KERNEL 
       fi 
       #End workaround
在fi后新添加一行：
unset LD_ASSUME_KERNEL
以及srvctl文件
[[email protected] opt]# vi /opt/ora10g/product/10.2.0/crs_1/bin/srvctl
找到如下内容：
LD_ASSUME_KERNEL=2.4.19
export LD_ASSUME_KERNEL
同样在其后新增加一行：
unset LD_ASSUME_KERNEL
保存退出，然后在node2重新执行root.sh
当然，既然我们已经知道了有这个问题，建议最好在node2执行root.sh之前，首先修改vipca。
其实同时需要你改的还有$ORACLE_HOME/bin/srvctl文件，不然等装完数据库之后，srvctl命令也是会报这个错误地。要知道srvctl这么常用，如果它执行老报错，那可是相当致命啊。不过呢你现在才安装到crs，离create db还远着呢，大可以等到创建完数据库，待到需要管理时再修改该文件。

B).如果你碰到了这个错误：
The given interface(s), "eth0" is not public. Public interfaces should  be used to configure virtual IPs.
解决方式如下：
==============================
图形界面上运行$CRS_HOME/bin/vipca，手工重新配置rac1-vip和rac2-vip。
[[email protected] opt]# xhost +
[[email protected] opt]# /opt/ora10g/product/10.2.0/crs_1/bin/vipca
按照提示点击下一步
点击finish即可vipca开始自动配置全部配置完成之后，点击exit退出操作窗口。

C).如果你碰到了这个错误：
Error 0(Native: listNetInterfaces:[3]) 
 [Error 0(Native: listNetInterfaces:[3])]
解决方式如下：
===============================
[[email protected] bin]# ./oifcfg iflist
eth1  10.10.17.0
virbr0  192.168.122.0
eth0  192.168.100.0
[[email protected] bin]# ./oifcfg setif -global eth0/192.168.100.0:public[[email protected] bin]# ./oifcfg setif -global eth1/10.10.10.0:cluster_
interconnect
[[email protected] bin]# ./oifcfg getif
eth0  192.168.100.0  global  public
eth1  10.10.10.0  global  cluster_interconnect
然后在视窗界面重新执行vipca即可，如上b例中所示。

时间： 2024-12-17 05:14:35

安装ORACLE_RAC遇到的问题与解决方法的相关文章

ASP.NET MVC 此安装不支持该项目类型解决方法

http://www.cnblogs.com/younggun/archive/2011/03/03/1969498.html ASP.NET MVC  此安装不支持该项目类型解决方法 打开 .csproject 文件  在  <ProjectTypeGuids>中的三个GUID的前两个修改为: {F85E285D-A4E0-4152-9332-AB1D724D3325};{349c5851-65df-11da-9384-00065b846f21}; 后面还有一个 GUID 是你项目的GUID

linux安装Navicat，界面出现乱码解决方法 （转发）

环境:Centos7 下载Navicat:navicat112_mariadb_cs_x64.tar.gz 点击" ./start_navicat"安装出现界面便面为乱码 解决办法:打开start_navicat文件, export LANG="en_US.UTF-8" 改为 export LANG="zh_CN.UTF-8". 源文章:Ubuntu 安装Navicat,界面出现乱码解决方法:http://blog.csdn.net/u01085

Win8/8.1下驱动安装“数据无效”错误的有效解决方法

Windows8.1 安装完vmware 后并没有安装 vmnet1,vmnet8 这两个虚拟网卡,纠结了半天,原来是两个服务没打开. 如果你使用的是Windows8或者8.1,并且精简过系统,那么在安装驱动程序的过程中,你可能会遇到"数据无效"的错误.笔者确信所拥有的驱动程序是可以安装在Win8/Win8.1的系统中的,但是查阅了网络上关于所有安装驱动程序过程中出现"数据无效"的解决方法,都尝试无果,后来终于摸索出行之有效的解决方法--开启服务,屡试不爽. 原来,

安装ftp碰到的问题及解决方法

1   CRT显示乱码: 本地windows机器.修改SecureCRT的设置.找到"选项"->"会话选项"->"外观": *    字符编码设置为utf-8. *    字体设置,选择中文字体,例如新宋体. 2   查看ftp 服务是否启动: service vsftpd status 3 使 用chkconfig vsftpd on 设置为开机自动运行. 4  使用 service vsftpd stop 停止 使用service

Win10安装office2013提示错误1406的解决方法

Win10已经发布了很长一段时间,也有遇到很多的问题.这不又有澳门金沙遇到了问题了,用户在安装office2013的时候,提示错误1406.怎么办?遇到这样的问题,我们应该怎么去解决它呢?下面就和大家说一下Win10安装office2013提示错误1406的解决方法. 具体方法如下: 1.在文件资源管理器的“快速访问”栏里输入regedit,打开注册表编辑器,到HKEY_CURRENT_USER\Software\Microsoft\Office\: 2.将注册表编辑器左栏的“office”及其

win7系统总是安装不了net2.0的解决方法

一些网友询问说ghost win7系统总是安装不了net2.0怎么办呢?net2.0是什么?ATI显卡的控制中心 就需要在NET2.0的基础上.可是一些用户说win7系统总是安装不了net2.0如何解决呢?针对此问题,下面教程和大家分享win7系统总是安装不了net2.0的解决方法. 解决方法如下: 1.如默认的不具备2.0组件就在控制面板-程序-打开关闭win功能-.NET Framework3.5去掉前面的选择即可. 2.然后下载win7 64位版本的2.0组件安装即可. 以上教程内容就是w

Kali Linux 安装 卡在 探测网络硬件 解决方法

在虚拟机上安装 Kali 的时候什么问题都没有,在实体机上安装就出现问题了. 首先选择的是 Install,就是文字安装,安装的时候经过选择国家语言,到探测网络硬件,屏幕上显示"探测网络硬件",然后就一直卡在那.然后又用了 Graphical Install,结果还是一样,等了半个小时还是卡着不动. 在网上找了有方法可以跳过探测网络硬件的,但是我试过了发现还是不行,因为他跳过探测网络硬件的话,后面的获取网络地址还是会卡住. 然后没办法了,就准备先从 Live 进系统看看,进这个倒是一点

sql2008安装时提示重启计算机失败解决方法

安装sql 2008的时候,在检测安装环境中有一项是”重新启动计算机”显示的结果是“失败”.上网看了半天,找到了解决方案,虽然我没弄明白具体原因,但问题是解决了,解决方案如下: 一.Windows+R,在对话框中输入“regedit”,点击运行:二.此时会弹出注册表信息,在里面找到“HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager”目录 三.删除“PendingFileRenameOperations”:四.关

Linux安装ElasticSearch启动报错的解决方法

Linux安装ElasticSearch后,ElasticSearch是不能用root用户启动的,以root用户启动会报错Refer to the log for complete error details,出现这种情况该如何解决呢?下面小编就为大家带来Linux安装ElasticSearch启动报错的解决方法,一起去看看吧 今天就出现的异常问题专门解决一下.你安装好ElasticSearch以后,在启动的时候需要注意的问题是,ElasticSearch是不能用root用户启动的(这是根据el