Some records for CentOS7 config TT server

1.ttautodeploy

1)check os version :/etc/issue -->/etc/redhat-release

2)give right inner and outer IP address for every conf file

2.remove mysql when install and build percona client, server, shared libs for libs confilcting problem.

3.install ttautodeploy/setup.sh

4.Need to re-config Web management :

1)config right IP Address for Nginx and php5

2)especially give a right root for Ngnix.conf and php-fpm.conf

3)At this time ,go to server ,you will find you always stay on Nginx welcome page.

So you need to pay attetion some jungles here:

*1check selinux blocked php or not?if so, shut up it.

*2(***)restart your nginx for affecting what your configs above. "sudo systemctl start nginx ".

That is OK now!

时间： 2024-08-10 21:57:53

Some records for CentOS7 config TT server的相关文章

Juniper SSG20 Config DHCP Server

JuniperSSG20 Config DHCP Server 1.登入Juniper防火墙,浏览至下图所示位置:查看Interface,一般选择为内网提供DHCP服务,然后点击Edit,进入编辑配置界面: 2.如下图,是配置界面:首先选择DHCPServer,然后填入相关信息,Lease是租期,Gateway是网关,Netmask是子网掩码,DNS#1是首选DNS服务器,WINS#1是首选WINS服务器:配置完成后,点击Apply或OK:再次进入配置页面,就可以看到最下面一排高级配置选型: 3

CentOS7搭建FTP Server

本文主要记录CentOS下FTP Server的安装和配置流程. 安装vsftpd yum install -y vsftpd 启动vsftpd service vsftpd start 运行下面的命令: netstat -nltp | grep 21 我们可以看到vsftpd监听在21端口了: 此时直接访问ftp://ip(ip要换成你服务器的ip)就可以看到FTP的目录了: 创建ftp用户创建一个用户: useradd ftpuser 对其设置密码: passwd ftpuser 大专栏

CentOS7配置VNC Server

CentOS7与6有些许变化,感觉有点不太适应. Step 1: 安装tigervnc server 和 X11 fonts: [[email protected] ~]# yum install tigervnc-server xorg-x11-fonts-Type1 Step 2:将VNC server的配置文件复制到/etc/systemd/system/下: [[email protected] ~]# cp /lib/systemd/system/[email protected] /

Centos7安装rabbitmq server 3.6.0

###假设所有操作在opt目录下进行 cd /opt mkdir apps cd apps ### 下载 RabbitMQ Server wget http://www.rabbitmq.com/releases/rabbitmq-server/v3.6.0/rabbitmq-server-generic-unix-3.6.0.tar.xz ### 解压 tar -xvJf rabbitmq-server-generic-unix-3.6.0.tar.xz ### 安装 Erlang yum i

CentOS7下SVN server的安装与配置

CentOS7通过yum install命令进行安装SVN(参考:http://subversion.apache.org/packages.html#centos) $ yum install subversion $ yum install mod_dav_svn 安装完成后新建一个用于做仓库的文件夹(/usr/local/svnrepository): 使用svnadmin create命令将刚刚创建的目录设置为svn仓库: svnadmin create /usr/local/svnre

centos7安装zabbix server

1.参照下列网址方法,打开端口:80,3306,443,22,10050,10051(可能实际不需要打开这么多) https://www.cnblogs.com/lw-2019forlinuxpython/p/10653188.html 2.设置中文 localedef -c -f UTF-8 -i zh_CN zh_CN.UTF-8 export LC_ALL=zh_CN.UTF-8echo 'LANG=zh_CN.UTF-8' > /etc/locale.conf 3.设置mariadb远程

CentOS7.1 VNC Server服务配置

一.安装VNC相关包 yum -y install tigervnc tigervnc-server tigervnc-server-module 二.复制配置模板文件为[email protected]:1.service cp /lib/systemd/system/[email protected] /lib/systemd/system/[email protected]:1.service 三.修改/lib/systemd/system/[email protected]:1.serv

CentOS7 base web server 版安装jdk1.8出现的问题

安装jdk时,提示 libXrender.so.1: 无法打开共享对象文件解决方案:使用yum安装相关依赖(64位jdk,32位改一下名字就行了,自行百度),执行以下三条命令: yum install libXext.x86_64 yum install libXrender.x86_64 yum install libXtst.x86_64 再重新安装jdk就没这个问题了. 其它问题:之前安装的是.sh格式的jdk,之后会提示错误信息,没能解决,无奈换了rpm格式的jdk就安装成功了.

records.config文件配置模板

# # # Process Records Config File # # <RECORD-TYPE> <NAME> <TYPE> <VALUE (till end of line)> # # RECORD-TYPE: CONFIG, LOCAL # NAME: name of variable # TYPE: INT, STRING, FLOAT # VALUE: Initial value for record # # # *NOTE*: All opt