半天后，尝试，引用网络上的零散资源，成品博客Leach协议ubuntu10.04在安装(12.04也可以在右侧安装，然而，实施效果的不，求解决~~)，并制作了补丁。
一个关键的安装步骤如下面：
1.在用户文件夹创建一个新的文件夹，所谓随机。忠告“Leach”。
2.将一键安装包中的文件拷贝到Leach目录中。
3.运行脚本：./leach-install.sh
中间过程可能须要输入管理员权限的password。请依据自己设定输入。
因为无法上传附件，我在此将补丁文件和脚本贴出来，假设有须要安装包的。能够联系我。
1.补丁文件
diff -u -r ns-2.35-old/apps/app.cc ns-2.35/apps/app.cc
--- ns-2.35-old/apps/app.cc 1999-03-04 10:21:34.000000000 +0800
+++ ns-2.35/apps/app.cc 2014-05-13 19:59:14.636571596 +0800
@@ -50,6 +50,9 @@
Application::Application() : enableRecv_(0), enableResume_(0)
{
+#ifdef MIT_uAMPS
+ enableRecv_ = 1;
+#endif
}
@@ -120,6 +123,22 @@
tcl.evalf("%s recv %d", name_, nbytes);
}
+#ifdef MIT_uAMPS
+void Application::recv(int link_dst, int data_size, char* meta_data, int sender)
+{
+ if (! enableRecv_)
+ return;
+ Tcl& tcl = Tcl::instance();
+ tcl.evalf("%s recv %d %d %d %s", name_, link_dst, sender, data_size, meta_data);
+}
+void Application::recv(char* ch_index)
+{
+ if (! enableRecv_)
+ return;
+ Tcl& tcl = Tcl::instance();
+ tcl.evalf("%s recv %s", name_, ch_index);
+}
+#endif
void Application::resume()
{
diff -u -r ns-2.35-old/apps/app.h ns-2.35/apps/app.h
--- ns-2.35-old/apps/app.h 1999-09-28 11:46:27.000000000 +0800
+++ ns-2.35/apps/app.h 2014-05-13 19:58:00.964434062 +0800
@@ -50,6 +50,10 @@
Application();
virtual void send(int nbytes);
virtual void recv(int nbytes);
+#ifdef MIT_uAMPS
+ virtual void recv(int sendto, int data_size, char* meta_data, int sender);
+ virtual void recv(char* ch_index);
+#endif
virtual void resume();
protected:
鍙湪 ns-2.35 瀛樺湪锛歛utoconf.h
diff -u -r ns-2.35-old/common/mobilenode.cc ns-2.35/common/mobilenode.cc
--- ns-2.35-old/common/mobilenode.cc 2006-02-22 21:21:52.000000000 +0800
+++ ns-2.35/common/mobilenode.cc 2014-05-13 20:01:14.620430927 +0800
@@ -338,6 +338,14 @@
"M %.5f %d (%.2f, %.2f, %.2f), (%.2f, %.2f), %.2f",
s.clock(), address_, X_, Y_, Z_, destX_, destY_, speed_);
log_target_->pt_->dump();
+#ifdef MIT_uAMPS
+#if 0
+ sprintf(log_target->buffer(),
+ "M %.5f %d (%.2f, %.2f, %.2f), (%.2f, %.2f), %.2f",
+ s.clock(), index_, X, Y, Z, destX, destY, speed);
+ log_target->dump();
+#endif
+#endif
}
diff -u -r ns-2.35-old/common/packet.cc ns-2.35/common/packet.cc
--- ns-2.35-old/common/packet.cc 2008-02-18 11:39:02.000000000 +0800
+++ ns-2.35/common/packet.cc 2014-05-13 20:02:50.244395619 +0800
@@ -60,6 +60,9 @@
int Packet::hdrlen_ = 0; // size of a packet‘s header
Packet* Packet::free_; // free list
int hdr_cmn::offset_; // static offset of common header
+#ifdef MIT_uAMPS
+int hdr_rca::offset_; // static offset of rca header
+#endif
int hdr_flags::offset_; // static offset of flags header
@@ -135,6 +138,18 @@
};
} class_cmnhdr;
+#ifdef MIT_uAMPS
+
+class RCAHeaderClass : public PacketHeaderClass {
+public:
+ RCAHeaderClass() : PacketHeaderClass("PacketHeader/RCA",
+ sizeof(hdr_rca)) {
+ bind_offset(&hdr_rca::offset_);
+ }
+} class_rcahdr;
+
+#endif
+
class FlagsHeaderClass : public PacketHeaderClass {
public:
FlagsHeaderClass() : PacketHeaderClass("PacketHeader/Flags",
diff -u -r ns-2.35-old/common/packet.h ns-2.35/common/packet.h
--- ns-2.35-old/common/packet.h 2010-05-10 06:28:41.000000000 +0800
+++ ns-2.35/common/packet.h 2014-05-13 20:08:09.208346200 +0800
@@ -61,6 +61,10 @@
#define HDR_IP(p) (hdr_ip::access(p))
#define HDR_RTP(p) (hdr_rtp::access(p))
#define HDR_TCP(p) (hdr_tcp::access(p))
+#ifdef MIT_uAMPS
+#define HDR_RCA(p) ((struct hdr_rca*)(p)->access(hdr_rca::offset_))
+#define HDR_MACSensor(p) ((struct hdr_macSensor*)(p)->access(hdr_mac::offset_))
+#endif
#define HDR_SCTP(p) (hdr_sctp::access(p))
#define HDR_SR(p) (hdr_sr::access(p))
#define HDR_TFRC(p) (hdr_tfrc::access(p))
@@ -198,9 +202,12 @@
// M-DART packets
static const packet_t PT_MDART = 72;
-
+
+#ifdef MIT_uAMPS
+static const packet_t PT_RCA = 73;
+#endif
// insert new packet types here
-static packet_t PT_NTYPE = 73; // This MUST be the LAST one
+static packet_t PT_NTYPE = 74; // This MUST be the LAST one
enum packetClass
{
@@ -416,7 +423,9 @@
name_[PT_DCCP_CLOSE]="DCCP_Close";
name_[PT_DCCP_CLOSEREQ]="DCCP_CloseReq";
name_[PT_DCCP_RESET]="DCCP_Reset";
-
+#ifdef MIT_uAMPS
+ name_[PT_RCA] = "rca";
+#endif
name_[PT_NTYPE]= "undefined";
}
static int addPacket(char *name);
@@ -553,7 +562,9 @@
*
*/
u_int8_t incoming;
-
+#ifdef MIT_uAMPS
+ static void PrintRcHeader(Packet *p, char *layer);
+#endif
//monarch extns end;
};
@@ -670,6 +681,48 @@
inline ModulationScheme& mod_scheme() { return (mod_scheme_); }
};
+#ifdef MIT_uAMPS
+
+struct hdr_rca {
+ int msg_type_;
+ char meta_[1000];
+ int meta_size_;
+ float dist_to_dest_;
+ int dist_est_;
+ int rca_src_;
+ int rca_mac_dst_;
+ int rca_link_dst_;
+ int code_;
+
+ static int offset_; // offset for this header
+ inline static int& offset() { return offset_; }
+ inline static hdr_rca* access(Packet* p) {
+ return (hdr_rca*) p->access(offset_);
+ }
+
+ /* per-field member functions */
+ inline int& msg_type() { return (msg_type_); }
+ inline int& meta_size() { return (meta_size_); }
+ inline float& get_dist() { return (dist_to_dest_); }
+ inline int& dist_est() { return (dist_est_); }
+ inline void set_meta(const char* data) {
+ meta_size_ = strlen(data);
+ if (meta_size_ > maxmetasize()) {
+ printf("Error: Meta size %d too large (max = %d).\n", meta_size_, maxmetasize());
+ exit(1);
+ }
+ memcpy(meta_, data, meta_size_+1);
+ }
+ inline char* const meta() { return (meta_); }
+ inline int maxmetasize() { return (sizeof(meta_)); }
+ inline int& rca_src() { return (rca_src_); }
+ inline int& rca_mac_dst() { return (rca_mac_dst_); }
+ inline int& rca_link_dst() { return (rca_link_dst_); }
+ inline int& get_code() { return (code_); }
+
+};
+
+#endif
class PacketHeaderClass : public TclClass {
protected:
@@ -699,6 +752,10 @@
assert(p->fflag_ == FALSE);
free_ = p->next_;
assert(p->data_ == 0);
+#ifdef MIT_uAMPS
+ hdr_rca* rca_hdr = HDR_RCA(p);
+ rca_hdr->meta_size_ = 0;
+#endif
p->uid_ = 0;
p->time_ = 0;
} else {
@@ -718,6 +775,17 @@
return (p);
}
+#ifdef MIT_uAMPS
+inline void Packet::PrintRcHeader(Packet *p, char *layer)
+{
+ hdr_cmn *hdr = HDR_CMN(p);
+ hdr_rca *rca_hdr = HDR_RCA(p);
+
+ printf("%s Layer received: Type=%d data_size=%d\n\tMeta = %s\n\tSource = %x\n\tTarget = %x\n\tLink_target = %x\n",layer,rca_hdr->msg_type(), hdr->size(), rca_hdr->meta(),rca_hdr->rca_src(), rca_hdr->rca_mac_dst(), rca_hdr->rca_link_dst());
+
+}
+#endif
+
/*
* Allocate an n byte data buffer to an existing packet
*
@@ -817,7 +885,15 @@
if (data_)
p->data_ = data_->copy();
p->txinfo_.init(&txinfo_);
-
+#ifdef MIT_uAMPS
+ hdr_rca* ch = HDR_RCA(this);
+ hdr_rca* new_ch = HDR_RCA(p);
+
+ if (ch->meta_size_) {
+ new_ch->meta_size_ = ch->meta_size_;
+ memcpy(new_ch->meta_, ch->meta_, ch->meta_size_+1);
+ }
+#endif
return (p);
}
鍙湪 ns-2.35 瀛樺湪锛歝onfig.log
鍙湪 ns-2.35 瀛樺湪锛歝onfig.status
鍙湪 ns-2.35 瀛樺湪锛歡en
鍙湪 ns-2.35/indep-utils/cmu-scen-gen/setdest 瀛樺湪锛歝alcdest
鍙湪 ns-2.35/indep-utils/cmu-scen-gen/setdest 瀛樺湪锛歁akefile
鍙湪 ns-2.35/indep-utils/webtrace-conv/dec 瀛樺湪锛歁akefile
鍙湪 ns-2.35/indep-utils/webtrace-conv/epa 瀛樺湪锛歁akefile
鍙湪 ns-2.35/indep-utils/webtrace-conv/nlanr 瀛樺湪锛歁akefile
鍙湪 ns-2.35/indep-utils/webtrace-conv/ucb 瀛樺湪锛歁akefile
鍙湪 ns-2.35 瀛樺湪锛歭each_test
diff -u -r ns-2.35-old/mac/channel.cc ns-2.35/mac/channel.cc
--- ns-2.35-old/mac/channel.cc 2009-01-03 05:50:24.000000000 +0800
+++ ns-2.35/mac/channel.cc 2014-05-13 20:10:13.372687539 +0800
@@ -121,7 +121,16 @@
((Phy*) obj)->setchnl(this);
return TCL_OK;
}
-
+#ifdef MIT_uAMPS
+ /*
+ * When nodes are dead (e.g., they have run out of energy),
+ * they must be removed from the network.
+ */
+ else if(strcmp(argv[1], "removeif") == 0) {
+ ((Phy*) obj)->deletechnl(&ifhead_);
+ return TCL_OK;
+ }
+#endif
// add interface for grid_keeper_
/*else if(strncasecmp(argv[1], "grid_keeper", 5) == 0) {
grid_keeper_ = (GridKeeper*)obj;
diff -u -r ns-2.35-old/mac/ll.h ns-2.35/mac/ll.h
--- ns-2.35-old/mac/ll.h 2010-03-08 13:54:52.000000000 +0800
+++ ns-2.35/mac/ll.h 2014-05-13 20:11:32.300421165 +0800
@@ -52,6 +52,9 @@
};
struct hdr_ll {
+#ifdef MIT_uAMPS
+public:
+#endif
LLFrameType lltype_; // link-layer frame type
int seqno_; // sequence number
int ackno_; // acknowledgement number
@@ -105,7 +108,9 @@
int seqno_; // link-layer sequence number
int ackno_; // ACK received so far
int macDA_; // destination MAC address
-
+#ifdef MIT_uAMPS
+ double mindelay_;
+#endif
Queue* ifq_; // interface queue
Mac* mac_; // MAC object
LanRouter* lanrouter_; // for lookups of the next hop
鍙湪 ns-2.35/mac 瀛樺湪锛歮ac-sensor.cc
鍙湪 ns-2.35/mac 瀛樺湪锛歮ac-sensor.h
鍙湪 ns-2.35/mac 瀛樺湪锛歮ac-sensor-timers.cc
鍙湪 ns-2.35/mac 瀛樺湪锛歮ac-sensor-timers.h
diff -u -r ns-2.35-old/mac/phy.cc ns-2.35/mac/phy.cc
--- ns-2.35-old/mac/phy.cc 2005-09-19 07:33:33.000000000 +0800
+++ ns-2.35/mac/phy.cc 2014-05-13 20:17:43.501993087 +0800
@@ -57,6 +57,13 @@
channel_ = 0;
node_ = 0;
head_ = 0;
+#ifdef MIT_uAMPS
+ /* Keep track of when transmission ends for carrier sense. */
+ /* Since CDMA can be used with CSMA, need to keep track of when
+ transmissions from each CDMA code will end. */
+ cs_end_ = new double[1000];
+ for (int i=0; i<1000; i++) cs_end_[i] = 0;
+#endif
}
int
diff -u -r ns-2.35-old/mac/phy.h ns-2.35/mac/phy.h
--- ns-2.35-old/mac/phy.h 2000-08-17 08:03:38.000000000 +0800
+++ ns-2.35/mac/phy.h 2014-05-13 20:45:37.292391713 +0800
@@ -90,6 +90,12 @@
LIST_INSERT_HEAD(head, this, chnl_link_);
//channel_ = chnl;
}
+#ifdef MIT_uAMPS
+ inline void deletechnl(struct if_head *head) {
+ LIST_REMOVE(this, chnl_link_);
+ //delete channel_;
+ }
+#endif
// list of all network interfaces on a node
Phy* nextnode(void) const { return node_link_.le_next; }
inline void insertnode(struct if_head* head) {
@@ -136,7 +142,11 @@
double bandwidth_; // bit rate
Channel *channel_; // the channel for output
-
+#ifdef MIT_uAMPS
+ double *cs_end_; // time when carrier sence will end per code
+public:
+ inline double csEnd(int code) { return cs_end_[code]; }
+#endif
};
diff -u -r ns-2.35-old/mac/wireless-phy.cc ns-2.35/mac/wireless-phy.cc
--- ns-2.35-old/mac/wireless-phy.cc 2007-09-04 12:32:18.000000000 +0800
+++ ns-2.35/mac/wireless-phy.cc 2014-05-13 20:48:04.392443613 +0800
@@ -75,6 +75,25 @@
WirelessPhy::WirelessPhy() : Phy(), sleep_timer_(this), status_(IDLE)
{
+#ifdef MIT_uAMPS
+ alive_ = 1; // 0 = dead, 1 = alive
+ bandwidth_ = 1000000; // 100 Mbps
+ Efriss_amp_ = 100 * 1e-12; // Friss amp energy (J/bit/m^2)
+ Etwo_ray_amp_ = 0.013 * 1e-12; // Two-ray amp energy (J/bit/m^4)
+ EXcvr_ = 50 * 1e-9; // Xcvr energy (J/bit)
+ // Use this base threshold to get a "hearing radius" of ~ 1 m
+ Pfriss_amp_ = Efriss_amp_ * bandwidth_; // Friss power (W/m^2)
+ Ptwo_ray_amp_ = Etwo_ray_amp_ * bandwidth_; // Two-ray power (W/m^4)
+ PXcvr_ = EXcvr_ * bandwidth_; // Xcvr power (W)
+ sleep_ = 0; // 0 = awake, 1 = asleep
+ ss_ = 1; // amount of spreading
+ time_finish_rcv_ = 0;
+ dist_ = 0; // approx. distance to transmitter
+ energy_ = 0;
+#else
+ bandwidth_ = 2*1e6; // 2 Mb
+ Pt_ = pow(10, 2.45) * 1e-3; // 24.5 dbm, ~ 281.8mw
+#endif
/*
* It sounds like 10db should be the capture threshold.
*
@@ -97,7 +116,16 @@
bind("Pt_", &Pt_);
bind("freq_", &freq_);
bind("L_", &L_);
-
+#ifdef MIT_uAMPS
+ bind("alive_",&alive_);
+ bind("bandwidth_",&bandwidth_);
+ bind("Efriss_amp_", &Efriss_amp_);
+ bind("Etwo_ray_amp_", &Etwo_ray_amp_);
+ bind("EXcvr_", &EXcvr_);
+ bind("sleep_",&sleep_);
+ bind("ss_",&ss_);
+ bind("dist_",&dist_);
+#endif
lambda_ = SPEED_OF_LIGHT / freq_;
node_ = 0;
@@ -196,6 +224,12 @@
node_ = (Node *)obj;
return TCL_OK;
}
+#ifdef MIT_uAMPS
+ else if (strcasecmp(argv[1], "attach-energy") == 0) {
+ energy_ = (EnergyResource*) obj;
+ return TCL_OK;
+ }
+#endif
}
return Phy::command(argc,argv);
}
@@ -207,7 +241,47 @@
* Sanity Check
*/
assert(initialized());
-
+#ifdef MIT_uAMPS
+ /*
+ * The power for transmission depends on the distance between
+ * the transmitter and the receiver. If this distance is
+ * less than the crossover distance:
+ * (c_d)^2 = 16 * PI^2 * L * hr^2 * ht^2
+ * ---------------------------------
+ * lambda^2
+ * the power falls off using the Friss equation. Otherwise, the
+ * power falls off using the two-ray ground reflection model.
+ * Therefore, the power for transmission of a bit is:
+ * Pt = Pfriss_amp_*d^2 if d < c_d
+ * Pt = Ptwo_ray_amp_*d^4 if d >= c_d.
+ * The total power dissipated per bit is PXcvr_ + Pt.
+ */
+ hdr_cmn *ch = HDR_CMN(p);
+ hdr_rca *rca_hdr = HDR_RCA(p);
+ double d = rca_hdr->get_dist();
+ double hr, ht; // height of recv and xmit antennas
+ double tX, tY, tZ; // transmitter location
+ ((MobileNode *)node_)->getLoc(&tX, &tY, &tZ);
+ ht = tZ + ant_->getZ();
+ hr = ht; // assume receiving node and antenna at same height
+ double crossover_dist = sqrt((16 * PI * PI * L_ * ht * ht * hr * hr)
+ / (lambda_ * lambda_));
+ if (d < crossover_dist)
+ if (d > 1)
+ Pt_ = Efriss_amp_ * bandwidth_ * d * d;
+ else
+ // Pfriss_amp_ is the minimum transmit amplifier power.
+ Pt_ = Efriss_amp_ * bandwidth_;
+ else
+ Pt_ = Etwo_ray_amp_ * bandwidth_ * d * d * d * d;
+ PXcvr_ = EXcvr_ * bandwidth_;
+
+ if (energy_)
+ {
+ if (energy_->remove(pktEnergy(Pt_, PXcvr_, ch->size())) != 0)
+ alive_ = 0;
+ }
+#endif
if (em()) {
//node is off here...
if (Is_node_on() != true ) {
@@ -317,7 +391,24 @@
PacketStamp s;
double Pr;
int pkt_recvd = 0;
-
+#ifdef MIT_uAMPS
+ hdr_cmn *ch = HDR_CMN(p);
+ hdr_rca *rca_hdr = HDR_RCA(p);
+ /*
+ * Record when this packet ends and its code.
+ */
+ int code = rca_hdr->get_code();
+ cs_end_[code] = Scheduler::instance().clock() + txtime(p);
+ /*
+ * If the node is asleep, drop the packet.
+ */
+ if (sleep_) {
+ //printf("Sleeping node... carrier sense ends at %f\n", cs_end_);
+ //fflush(stdout);
+ pkt_recvd = 0;
+ goto DONE;
+ }
+#endif
Pr = p->txinfo_.getTxPr();
// if the node is in sleeping mode, drop the packet simply
@@ -367,7 +458,44 @@
hdr_cmn *hdr = HDR_CMN(p);
hdr->error() = modulation_->BitError(Pr);
}
-
+#ifdef MIT_uAMPS
+ /*
+ * Only remove energy from nodes that are awake and not currently
+ * transmitting a packet.
+ */
+ if (Scheduler::instance().clock() >= time_finish_rcv_) {
+ PXcvr_ = EXcvr_ * bandwidth_;
+ if (energy_)
+ {
+ if (energy_->remove(pktEnergy((double)0, PXcvr_,ch->size())) != 0)
+ alive_ = 0;
+ }
+ time_finish_rcv_ = Scheduler::instance().clock() + txtime(p);
+ }
+ /*
+ * Determine approximate distance of node transmitting node
+ * from received power.
+ */
+ double hr, ht; // height of recv and xmit antennas
+ double rX, rY, rZ; // receiver location
+ double d1, d2;
+ double crossover_dist, Pt, M;
+ ((MobileNode *)node_)->getLoc(&rX, &rY, &rZ);
+ hr = rZ + ant_->getZ();
+ ht = hr; // assume transmitting node antenna at same height
+
+ crossover_dist = sqrt((16 * PI * PI * L_ * ht * ht * hr * hr)
+ / (lambda_ * lambda_));
+ Pt = p->txinfo_.getTxPr();
+ M = lambda_ / (4 * PI);
+ d1 = sqrt( (Pt * M * M) / (L_ * Pr) );
+ d2 = sqrt(sqrt( (Pt * hr * hr * ht * ht) / Pr) );
+ if (d1 < crossover_dist)
+ dist_ = d1;
+ else
+ dist_ = d2;
+ rca_hdr->dist_est() = (int) ceil(dist_);
+#endif
/*
* The MAC layer must be notified of the packet reception
* now - ie; when the first bit has been detected - so that
@@ -600,3 +728,23 @@
sleep_timer_.resched(10.0);
}
+
+#ifdef MIT_uAMPS
+double
+WirelessPhy::pktEnergy(double pt, double pxcvr, int nbytes)
+{
+
+ /*
+ * Energy (in Joules) is power (in Watts=Joules/sec) divided by
+ * bandwidth (in bits/sec) multiplied by the number of bytes, times 8 bits.
+ */
+ // If data has been spread, power per DATA bit should be the same
+ // as if there was no spreading ==> divide transmit power
+ // by spreading factor.
+ double bits = (double) nbytes * 8;
+ pt /= ss_;
+ double j = bits * (pt + pxcvr) / bandwidth_;
+ return(j);
+}
+
+#endif
diff -u -r ns-2.35-old/mac/wireless-phy.h ns-2.35/mac/wireless-phy.h
--- ns-2.35-old/mac/wireless-phy.h 2007-01-30 13:00:50.000000000 +0800
+++ ns-2.35/mac/wireless-phy.h 2014-05-13 21:07:12.060482931 +0800
@@ -48,7 +48,9 @@
#include "phy.h"
#include "mobilenode.h"
#include "timer-handler.h"
-
+#ifdef MIT_uAMPS
+#include <mit/rca/energy.h>
+#endif
class Phy;
class Propagation;
class WirelessPhy;
@@ -121,11 +123,30 @@
double CPThresh_; // capture threshold (db)
Antenna *ant_;
+#ifdef MIT_uAMPS
+ EnergyResource *energy_; // Energy resource
+ int alive_; // 0 = dead, 1 = alive
+//endif
+//ifdef MIT_uAMPS_temp
+ double Efriss_amp_; // Xmit amp energy (J/bit/m^2)
+ double Etwo_ray_amp_; // Xmit amp energy (J/bit/m^4)
+ double EXcvr_; // Xcvr energy (J/bit)
+ double Pfriss_amp_; // Friss base transmission power (W/m^2)
+ double Ptwo_ray_amp_; // Two-ray base transmission power (W/m^4)
+ double PXcvr_; // Xcvr Power (W)
+ int sleep_; // 0 = awake, 1 = asleep
+ int ss_; // amount of spreading
+ double time_finish_rcv_;
+ double dist_; // approx. distance to transmitter
+private:
+ double pktEnergy(double pt, double pxcvr, int nbytes);
+#endif
+protected:
Propagation *propagation_; // Propagation Model
Modulation *modulation_; // Modulation Schem
// Why phy has a node_ and this guy has it all over again??
-// MobileNode* node_; // Mobile Node to which interface is attached .
+ //MobileNode* node_; // Mobile Node to which interface is attached .
enum ChannelStatus { SLEEP, IDLE, RECV, SEND };
bool node_on_; // on-off status of this node
鍙湪 ns-2.35 瀛樺湪锛歁akefile
diff -u -r ns-2.35-old/Makefile.in ns-2.35/Makefile.in
--- ns-2.35-old/Makefile.in 2011-10-24 00:29:54.000000000 +0800
+++ ns-2.35/Makefile.in 2014-05-13 20:36:28.672410926 +0800
@@ -59,7 +59,7 @@
LDFLAGS = @[email protected]
LDOUT = -o $(BLANK)
-DEFINE = -DTCP_DELAY_BIND_ALL -DNO_TK @[email protected] @[email protected] @[email protected] -DNS_DIFFUSION -DSMAC_NO_SYNC [email protected][email protected] -DUSE_SINGLE_ADDRESS_SPACE -Drng_test
+DEFINE = -DTCP_DELAY_BIND_ALL -DNO_TK @[email protected] @[email protected] @[email protected] -DNS_DIFFUSION -DSMAC_NO_SYNC [email protected][email protected] -DUSE_SINGLE_ADDRESS_SPACE -Drng_test -DMIT_uAMPS
INCLUDES = -I. @[email protected] @@ -72,7 +72,7 @@
-I./diffusion3/lib/nr -I./diffusion3/ns -I./diffusion3/filter_core -I./asim/ -I./qs -I./diffserv -I./satellite - -I./wpan
+ -I./wpan -I./mit/rca -I./mit/uAMPS
LIB = @@ -333,6 +333,9 @@
wpan/p802_15_4sscs.o wpan/p802_15_4timer.o wpan/p802_15_4trace.o wpan/p802_15_4transac.o apps/pbc.o + mit/rca/energy.o mit/rca/rcagent.o + mit/rca/rca-ll.o mit/rca/resource.o + mac/mac-sensor-timers.o mac/mac-sensor.o mit/uAMPS/bsagent.o @[email protected]
鍙湪 ns-2.35 瀛樺湪锛歮it
鍙湪 ns-2.35/tcl/ex 瀛樺湪锛?94demo.nam
鍙湪 ns-2.35/tcl/ex 瀛樺湪锛?94demo.tr
鍙湪 ns-2.35/tcl/ex 瀛樺湪锛歭each-wireless.tcl
鍙湪 ns-2.35/tcl/lib 瀛樺湪锛歯s-autoconf.tcl
diff -u -r ns-2.35-old/tcl/lib/ns-default.tcl ns-2.35/tcl/lib/ns-default.tcl
--- ns-2.35-old/tcl/lib/ns-default.tcl 2010-07-04 06:45:45.000000000 +0800
+++ ns-2.35/tcl/lib/ns-default.tcl 2014-05-13 21:13:13.196383783 +0800
@@ -1590,3 +1590,11 @@
Agent/MDART set macFailed_ true
Agent/MDART set etxMetric_ true
+
+#Phy/WirelessPhy set alive_ 1
+#Phy/WirelessPhy set Efriss_amp_ 100 * 1e-12
+#Phy/WirelessPhy set Etwo_ray_amp_
+#Phy/WirelessPhy set EXcvr_
+#Phy/WirelessPhy set sleep_
+#Phy/WirelessPhy set ss_
+#Phy/WirelessPhy set dist_
鍙湪 ns-2.35/tcl/mobility 瀛樺湪锛歭each-c.tcl
鍙湪 ns-2.35/tcl/mobility 瀛樺湪锛歭each.tcl
鍙湪 ns-2.35/tcl/mobility 瀛樺湪锛歮te.tcl
鍙湪 ns-2.35/tcl/mobility 瀛樺湪锛歴tat-clus.tcl
鍙湪 ns-2.35 瀛樺湪锛歵est
diff -u -r ns-2.35-old/trace/cmu-trace.cc ns-2.35/trace/cmu-trace.cc
--- ns-2.35-old/trace/cmu-trace.cc 2011-10-03 06:32:35.000000000 +0800
+++ ns-2.35/trace/cmu-trace.cc 2014-05-13 20:31:31.096823052 +0800
@@ -64,6 +64,9 @@
//</zheng: add for 802.15.4>
#include "diffusion/diff_header.h" // DIFFUSION -- Chalermek
+#ifdef MIT_uAMPS
+#include <mit/rca/rcagent.h>
+#endif
PacketTracer::PacketTracer() : next_(0)
@@ -1415,6 +1418,11 @@
case PT_ARP:
format_arp(p, offset);
break;
+#ifdef MIT_uAMPS
+ case PT_RCA:
+ format_rca(p,offset);
+ break;
+#endif
default:
format_ip(p, offset);
offset = strlen(pt_->buffer());
@@ -1451,6 +1459,10 @@
case PT_CBR:
format_rtp(p, offset);
break;
+#ifdef MIT_uAMPS
+ case PT_RCA:
+ break;
+#endif
case PT_DIFF:
break;
case PT_GAF:
@@ -1603,3 +1615,40 @@
duration_scaling_factor_ = atof(tcl.result());
}
//</zheng>
+
+#ifdef MIT_uAMPS
+void
+CMUTrace::format_rca(Packet *p, int offset)
+{
+ struct hdr_rca *rca_hdr = HDR_RCA(p);
+ char op = (char) type_;
+
+ switch (rca_hdr->msg_type())
+ {
+ case ADV:
+ op = ADV_CHAR;
+ break;
+
+ case REQ:
+ op = REQ_CHAR;
+ break;
+
+ case DATA:
+ op = DATA_CHAR;
+ break;
+
+ default:
+ //printf("format_rca: Warning, unknown meta-data type %d\n",rca_hdr->msg_type());
+ op = (char) type_;
+ break;
+ }
+
+ sprintf(pt_->buffer() + offset, "------- [%c %d %d %d] ",
+ op,
+ rca_hdr->rca_src(),
+ rca_hdr->rca_link_dst(),
+ rca_hdr->rca_mac_dst()
+ );
+ return;
+}
+#endif
diff -u -r ns-2.35-old/trace/cmu-trace.h ns-2.35/trace/cmu-trace.h
--- ns-2.35-old/trace/cmu-trace.h 2010-05-10 06:28:41.000000000 +0800
+++ ns-2.35/trace/cmu-trace.h 2014-05-13 20:32:22.196397952 +0800
@@ -56,7 +56,11 @@
// change wrt Mike‘s code
#define EOT ‘x‘
-
+#ifdef MIT_uAMPS
+#define ADV_CHAR ‘A‘
+#define REQ_CHAR ‘R‘
+#define DATA_CHAR ‘D‘
+#endif
#define TR_ROUTER 0x01
@@ -161,7 +165,9 @@
void format_aodv(Packet *p, int offset);
void format_aomdv(Packet *p, int offset);
void format_mdart(Packet *p, int offset);
-
+#ifdef MIT_uAMPS
+ void format_rca(Packet *p, int offset);
+#endif
// This holds all the tracers added at run-time
static PacketTracer *pktTrc_;
2.脚本文件
#!/bin/sh echo "Before installing NS2, you should ensure that the ‘ns-allinone-2.35‘ is in ‘/home/<your name>/Leach‘" echo "If the files is right, press any key. Otherwise, press ‘Ctrl+D‘" read ch sudo apt-get update sudo apt-get install libx11-dev libxmu-dev libxmu-headers libxt-dev libtool g++ patch tcl tk tcl-dev tk-dev gnuplot tar -zxvf ns-allinone-2.35.tar.gz cp -ir ns-2.35 ns-allinone-2.35/ cp leach.diff ns-allinone-2.35 cd ns-allinone-2.35 patch -p0 < leach.diff ./install cd .. echo "The NS2 has been installed. If you want to configure ‘.bashrc‘ file automatically, press any key. Otherwise, press ‘Ctrl+D‘" read ch pathto=$(pwd) echo "export PATH=\$PATH:$pathto/ns-allinone-2.35/bin:$pathto/ns-allinone-2.35/tcl8.5.10/unix:$pathto/ns-allinone-2.35/tk8.5.10/unix" >> ~/.bashrc echo "export LD_LIBRARY_PATH=\$LD_LIBRARY_PATH:$pathto/ns-allinone-2.35/otcl-1.14:$pathto/ns-allinone-2.35/lib" >> ~/.bashrc echo "export LD_LIBRARY=\$LD_LIBRARY:$pathto/ns-allinone-2.35/tcl8.5.10/library" >> ~/.bashrc echo "export RCA_LIBRARY=$pathto/ns-allinone-2.35/ns-2.35/mit/rca" >> ~/.bashrc echo "export uAMPS_LIBRARY=$pathto/ns-allinone-2.35/ns-2.35/mit/uAMPS" >> ~/.bashrc echo "echo \"==================Welcome to use NS2 for Leach!=====================\"" >> ~/.bashrc echo "echo \"If you have any questions, please contact norbert_jxl AT 163.com\"" >> ~/.bashrc echo "The ‘.bashrc‘ file is configured!"
版权声明：本文博客原创文章，博客，未经同意，不得转载。
时间： 2024-08-09 06:19:08