VMware CentOS Device eth0 does not seem to be present

在VMware里克隆出来的CentOS Linux。。

ifconfig...没有看到eth0.。然后重启网卡又报下面错误。

故障现象:

service network restart
Shutting down loopback insterface:               
                                                                               
     [  OK  ]
Bringing up loopback insterface:                               
                                                                          [  OK 
]
Bringing up interface eth0:  Device eth0 does not seem to be
present,delaying initialization.                    [FAILED]

解决办法:

首先,打开/etc/udev/rules.d/70-persistent-net.rules内容如下面例子所示:

# vi /etc/udev/rules.d/70-persistent-net.rules
# This file was
automatically generated by the /lib/udev/write_net_rules
# program, run by
the persistent-net-generator.rules rules file.
#
# You can modify it, as
long as you keep each rule on a single
# line, and change only the value of
the NAME= key.
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net",
ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:8f:89:9
7",
ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCI device 0x1022:0x2000
(pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
ATTR{address}=="00:0c:29:50:bd:1
7", ATTR{type}=="1", KERNEL=="eth*",
NAME="eth1"

记录下,eth1网卡的mac地址00:0c:29:50:bd:17

接下来,打开/etc/sysconfig/network-scripts/ifcfg-eth0

# vi /etc/sysconfig/network-scripts/ifcfg-eth0

将 DEVICE="eth0"  改成  DEVICE="eth1"  ,
将 HWADDR="00:0c:29:8f:89:97"
改成上面的mac地址  HWADDR="00:0c:29:50:bd:17"

最后,重启网络

# service network restart
或者

# /etc/init.d/network restart

正常了。

时间: 2024-10-10 14:48:57

VMware CentOS Device eth0 does not seem to be present的相关文章

vmware报Device eth0 does not seem to be present, delaying initialization错误

系统环境: CentOS-6.8-X86_64 使用vmware的克隆功能后,使用新克隆的虚拟机会报Device eth0 does not seem to be present, delaying initialization这样一个错误,这是由于网卡MAC地址错误导致的问题. 解决方法: 1.删除/etc/udev/rules.d/70-persistent-net.rules文件 2.编辑/etc/sysconfig/network-scripts/ifcfg-ethX文件,删除关于MAC

CentOS Linux解决Device eth0 does not seem to be present

在VMware里克隆出来的CentOS Linux.. ifconfig...没有看到eth0..然后重启网卡又报下面错误. 故障现象: service network restartShutting down loopback insterface:                                                                                                     [  OK  ]Bringing up loo

CentOS Linux解决Device eth0 does not seem to be present【转】

在VMware里克隆出来的CentOS Linux.. ifconfig...没有看到eth0..然后重启网卡又报下面错误. 故障现象: service network restartShutting down loopback insterface:                                                                                                     [  OK  ]Bringing up loo

CentOS Linux解决Device eth0 does not seem to be present 但是没有发现eth1

http://www.linuxidc.com/Linux/2012-12/76248.htm 此标题已经是有人写过的了.但是为什么拿来重写? 我复制完,没有发现有eth1这个网卡 为什么呢?需要选中 重新初始化所有网卡的MAC地址 后来我又尝试了另一种方法 vi /etc/udev/rules.d/70-persistent-net.rules   删除原eth0,      然后把eth1改成eth0 vi /etc/sysconfig/network-scripts/ifcfg-eth0

虚拟机CentOS复制到其他主机vm下IP地址无效(Bringing up interface eth0: Device eth0 does not seem to be present, delaying initialization)

Bringing up interface eth0:  Device eth0 does not seem to be present, delaying initialization 在虚拟机VM下安装的CentOS遇到这个问题,我是将centos.vmx放到其他的VM下打开 #dhclient #service network restart Shutting down loopback insterface:                                        

CentOS中Device eth0 does not seem to be present错误解决办法

今天克隆的虚拟机,当需要多台虚拟机的时候,试用克隆真是方便,不过遇到了 Device eth0 does not seem to be present 的问题,在网上找到遇到同样问题的解决方法, 很顺利的解决,记录之: ifconfig…没有看到eth0..然后重启网卡又报下面错误. 故障现象: service network restart Shutting down loopback insterface: [ OK ] Bringing up loopback insterface: [

CentOS:Device eth0 does not seem to be present 问题解决方法

使用Vmware克隆linux虚拟机后,常常是网络连接不上,表现为ifconfig无法看到网卡,即使改了/etc/sysconfig/network-scripts/下的相应网卡文件onboot=yes也不行,重启网络时(/etc/init.d/network restart)会出现以下错误提示: "Device eth0 does not seem to be present, delaying initialization." 这是由于克隆机的网卡配置文件错误导致的,解决方法: 1

clone vmware虚拟机,启动的时候出现device eth0 does not seem to be present, delaying initialization错误

克隆了一个centos虚拟机,但是出现错误:device eth0 does not seem to be present, delaying initialization,可以尝试以下两种方式 1.vi /etc/sysconfig/network-scripts/ifcfg-eth0ifcfg-eth0的配置文件里保存了以前的MAC地址,就把这一行删除掉在重启网卡 2./etc/udev/rules.d/70-persistent-net.rules 删除后重启机器因为这个文件绑定了网卡和m

CentOS Linux解决 Device eth0 does not seem to be present

通过OVF部署Linux主机后提示 ringing up interface eth0:  Device eth0 does not seem to be present,delaying initialization. 解决办法: 首先,打开/etc/udev/rules.d/70-persistent-net.rules内容如下面例子所示: # vi /etc/udev/rules.d/70-persistent-net.rules# This file was automatically