CentOS+Nginx+Tomcat+Mysql+PHP 环境搭建及系统部署

==============安装centos 7.0=======================
选择最小安装，将相关的"调试工具"、“兼容性程序库”、“开发工具”选中。
此操作是为了减少后期安装或编译相关服务时出现依赖、或环境的问题。
硬盘分区，可根据个人的习惯而定，不清楚的可以直接选择系统自动分区，
由于个人的习惯，本人的分区如下，仅供参考：
/boot 500M 用于启动Linux的核心文件
swap 5120M(5G) Linux下的交换分区，又称为虚拟内存，一般是物理内存的2倍，但不建议超过8G
/ 51200M(50G) 所有系统的文件等，都在该分区下
/home 剩下的空间 用户主目录，新建的用户的目录将会出现在这里

================关闭不需要的安全设置，使用其他的安全管理================
vi /etc/selinux/config //关闭Selinux
SELINUX=disabled //原为enforcing改为disabled
------------------------或使用以下命令关闭SELINUX---------------------------------------
sed -i "s/SELINUX=enforcing/SELINUX=disabled/" /etc/selinux/config
setenforce 0

systemctl stop firewalld //停止系统默认的防火墙
systemctl mask firewalld //屏蔽服务(让它不能启动)
reboot //重启让selinux配置生效

=================管理工具安装======================
安装ifconfig、ntsysv、updatedb、lrzsz(上传下载)、wget(远程http下载)功能
yum install -y chkconfig net-tools telnet ntsysv mlocate lrzsz wget lsof setuptool system-config-securitylevel-tui system-config-network-gui system-config-network-tui system-config-date tcpdump
yum install -y vim nano //安装编辑器

==============更新Centos 7.0 repo源=====================
yum install -y epel-release
rpm -ivh http://rpms.famillecollet.com/enterprise/remi-release-7.rpm
rpm -Uvh https://mirror.webtatic.com/yum/el7/epel-release.rpm
rpm -Uvh https://mirror.webtatic.com/yum/el7/webtatic-release.rpm
yum clean all
yum makecache
yum install -y python-pip
pip install --upgrade pip
pip install requests

=====安装nginx yum安装的第三方repo源文件(使用编译安装则不需要)=======
mkdir /root/software
cd /root/software
wget https://mirrors.ustc.edu.cn/epel/7/x86_64/Packages/e/epel-release-7-11.noarch.rpm
rpm -ivh epel-release-7-11.noarch.rpm
rpm -ivh http://nginx.org/packages/centos/7/noarch/RPMS/nginx-release-centos-7-0.el7.ngx.noarch.rpm

=====安装mysql yum安装的第三方repo源文件(使用编译安装则不需要)=======
cd /root/software //进入源文件集中文件夹
wget http://dev.mysql.com/get/mysql57-community-release-el7-8.noarch.rpm //下载
yum localinstall -y mysql57-community-release-el7-8.noarch.rpm //通过rpm安装得到repo源
yum repolist enabled | grep "mysql.-community." //检查mysql源是否安装成功

=================各种环境的预装======================
yum install -y make cmake gcc gcc-c++ autoconf libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel libxml2 libxml2-devel zlib zlib-devel glibc glibc-devel glib2 glib2-devel bzip2 bzip2-devel ncurses ncurses-devel curl curl-devel e2fsprogs e2fsprogs-devel krb5 krb5-devel libidn libidn-devel openssl openssl-devel openldap openldap-devel nss_ldap openldap-clients openldap-servers gd gd-devel perl expat expat-devel nss_ldap unixODBC-devel libxslt-devel libevent-devel libtool-ltdl bison libtool zip unzip gmp-devel //安装各种环境所需要的插件
yum install -y pcre pcre-devel //安装PCRE(可与预装环境同步进行)
yum update -y //升级补丁

=======================安装mysql及初始设置mysql=======================
yum install -y bison-devel libaio-devel //预装mysql环境
yum install -y perl-Data-Dumper //预装mysql所需环境
yum install -y mysql-server //安装mysqld
service mysqld start //启动mysql
systemctl enable mysqld.service //开机自启动

grep ‘temporary password‘ /var/log/mysqld.log //mysql5.7版本后，初始密码不再为空，默认随机生成，可通过该命令查询
mysql -u root -p //进入mysql
alter user [email protected] identified by ‘三种或以上的八位字符‘; 默认需要先修改密码，才能其他操作
exit; //退出mysql管理
----------------------------设置mysql 不分大小写----------------------
vi /etc/my.cnf
[mysqld]
lower_case_table_names=1 //必须在[mysqld] 中

-------------------------配置mysql支持UTF-8-------------------------
[mysqld]
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
lower_case_table_names=1
character-set-server=utf8
max_connections=500
innodb_log_file_size=60M
innodb_buffer_pool_size=128M
symbolic-links=0

[client]
default-character-set=utf8
socket=/var/lib/mysql/mysql.sock

[mysqld_safe]
open-files-limit = 8192
log-error=/var/log/mysqld.log
socket=/var/lib/mysql/mysql.sock
pid-file=/var/run/mysqld/mysqld.pid

service mysqld restart //重启mysql

=================MySQL运维小知识======================
MySQL高占用CPU、内存，有可能是由于进程未能及时释放，可以通过简单的设置，可以有效的解决这个问题。
mysql -uroot -p
mysql> show global variables like ‘%timeout‘;
mysql> set global interactive_timeout=100;
-----------------上述的，在重启mysqld.service后失效-----------------------------------
vi /etc/my.cnf
[mysqld]
interactive_timeout=20
wait_timeout=20
------------------------------上述，任何时候都生效-------------------------
-----------------------------mysql创建远程用户并授权---------------------------
mysql -uroot -p
mysql> create user root identified by ‘123456‘;
mysql> grant all privileges on . to ‘root‘@‘%‘identified by ‘123456‘ with grant option;
mysql> flush privileges;
-----------------------------mysql创建数据库-----------------------------
mysql> CREATE DATABASE lottery DEFAULT CHARACTER SET utf8 COLLATE utf8_general_ci;
----------------------------mysql修改指定用户的密码-------------------------------
update mysql.user set password=password(‘新密码‘) where User="test" and Host="localhost";
---------------------------mysql删除指定用户-------------------------------------
delete from user where User=‘test‘ and Host=‘localhost‘;

====================安装PHP环境==========================
yum install -y php56w php56w-cli php56w-common php56w-gd php56w-ldap php56w-mbstring php56w-mcrypt php56w-mysql php56w-pdo php56w-devel
yum install -y traceroute net-snmp-devel vim sysstat tree mysql-devel ntpdate libjpeg* bind-utils
yum install -y php56w-imap php56w-odbc php56w-pear php56w-xml php56w-xmlrpc php56w-mhash libmcrypt php56w-bcmath
yum install -y php56w-fpm
vi /etc/php-fpm.d/www.conf

user = nginx //默认为apache，修改与nginx一致的用户 需要安装nginx后才能改
group = nginx //默认为apache，修改与nginx一致的组 需要安装nginx后才能改

vi /etc/php.ini

session.save_path = "/var/lib/php/session" //设置session的位置，否则PHP运行会出错

chmod 777 /var/lib/php/session //设置文件夹属性
chkconfig php-fpm on

=============安装yum nginx============
yum install -y automake autoconf libtool make
yum install -y nginx
chkconfig nginx on
cd /etc/nginx
mkdir vhost //放虚拟主机配置文件的位置
vi nginx.conf
-------------在server{}中添加如下内容---------------------------
~~~~在server的root下添加如下内容，默认首页文件名~
index index.php default.php index.html index.htm;
~~在server中添加支持PHP的语句~~~
location ~ .php$ {
root html;
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
include fastcgi_params;
}
---------------------在http{}的最后，添加如下内容---------------------------
include vhost/*.conf; //添加完成后保存退出
nginx -t //检查nginx.conf及vhost下的配置文件是否正确
service php-fpm start //启动PHP-FPM
service nginx restart //重启nginx服务
------------------虚拟主机配置示例------------------------------
server {
listen 808;
server_name 10.17.162.113:808;
root /home/website/phpmyadmin/wwwroot;
location / {
index index.php index.html index.shtml;
}

location ~ .php$ {
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME /home/website/phpmyadmin/wwwroot$fastcgi_script_name;
include fastcgi_params;
}

#log...
}
------------------Nginx 反向代理转发(无条件访问HTTPS)---------------------------
server {
listen 80;
server_name huizhong.itrxm.com;
rewrite ^(.*)$ https://$host$1 permanent;
}
server {
listen 443;
server_name huizhong.itrxm.com;
ssl on;
ssl_certificate /etc/nginx/vhost/ssl/huizhong.itrxm.com-certificate.crt;
ssl_certificate_key /etc/nginx/vhost/ssl/huizhong.itrxm.com-private.key;
ssl_session_timeout 5m;
ssl_protocols TLSv1;
ssl_ciphers HIGH:!aNULL:!MD5;
ssl_prefer_server_ciphers on;
location / {
client_max_body_size 16m;
client_body_buffer_size 128k;
proxy_pass https://10.17.162.113:6443;
proxy_set_header REMOTE-HOST $remote_addr;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header X-Forwarded-Proto https;
proxy_next_upstream off;
proxy_buffer_size 32k;
proxy_buffers 64 32k;
proxy_busy_buffers_size 1m;
proxy_temp_file_write_size 512k;
proxy_connect_timeout 30;
proxy_read_timeout 300;
proxy_send_timeout 300;
}
}
-------------------------------Nginx访问TomCat WebApps下某个目录---------------
server {
listen 80;
server_name hhcphb.itrxm.com;
#charset koi8-r;
#access_log logs/host.access.log main;
location / {
client_max_body_size 16m;
client_body_buffer_size 128k;
proxy_pass http://59.188.14.217:8080/HBH5/;
proxy_set_header REMOTE-HOST $remote_addr;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
#root html;
#index index.html;
proxy_next_upstream off;
proxy_buffer_size 32k;
proxy_buffers 64 32k;
proxy_busy_buffers_size 1m;
proxy_temp_file_write_size 512k;
proxy_connect_timeout 30;
proxy_read_timeout 300;
proxy_send_timeout 300;
}
location /HBH5/ {
client_max_body_size 16m;
client_body_buffer_size 128k;
proxy_pass http://59.188.14.217:8080/HBH5/;
proxy_set_header REMOTE-HOST $remote_addr;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
#root html;
#index index.html;
proxy_next_upstream off;
proxy_buffer_size 32k;
proxy_buffers 64 32k;
proxy_busy_buffers_size 1m;
proxy_temp_file_write_size 512k;
proxy_connect_timeout 30;
proxy_read_timeout 300;
proxy_send_timeout 300;
}
}

================JAVA开发环境安装=============
yum search java-1.7 //搜索java-1.7的版本
yum install -y java-1.7.0-openjdk-devel.x86_64 //安装java-1.7.0版本开发环境
cd /usr/lib/jvm/java-1.7.0-openjdk-1.7.0.161-2.6.12.0.el7_4.x86_64/ //进入安装目录
vi /etc/profile //环境配置
-------------------在文件最后面，添加上-----------------------
export JAVA_HOME=/usr/lib/jvm/java-1.7.0-openjdk-1.7.0.161-2.6.12.0.el7_4.x86_64 //版本不同，路径不一样，需要注意这个问题
export PATH=$JAVA_HOME/bin:$PATH
export CLASSPATH=.:$JAVA_HOME/lib/dt.jar:$JAVA_HOME/lib/tools.jar

source /etc/profile //立即生效
javac //运行测试
-----------------------显示以下内容说明配置成功---------------------------
[[email protected] lib]# javac
Usage: javac <options> <source files>
where possible options include:
-g Generate all debugging info
-g:none Generate no debugging info
-g:{lines,vars,source} Generate only some debugging info
-nowarn Generate no warnings
-verbose Output messages about what the compiler is doing
-deprecation Output source locations where deprecated APIs are used
-classpath <path> Specify where to find user class files and annotation processors
-cp <path> Specify where to find user class files and annotation processors
-sourcepath <path> Specify where to find input source files
-bootclasspath <path> Override location of bootstrap class files
-extdirs <dirs> Override location of installed extensions
-endorseddirs <dirs> Override location of endorsed standards path
-proc:{none,only} Control whether annotation processing and/or compilation is done.
-processor <class1>[,<class2>,<class3>...] Names of the annotation processors to run; bypasses default discovery process
-processorpath <path> Specify where to find annotation processors
-parameters Generate metadata for reflection on method parameters
-d <directory> Specify where to place generated class files
-s <directory> Specify where to place generated source files
-h <directory> Specify where to place generated native header files
-implicit:{none,class} Specify whether or not to generate class files for implicitly referenced files
-encoding <encoding> Specify character encoding used by source files
-source <release> Provide source compatibility with specified release
-target <release> Generate class files for specific VM version
-profile <profile> Check that API used is available in the specified profile
-version Version information
-help Print a synopsis of standard options
-Akey[=value] Options to pass to annotation processors
-X Print a synopsis of nonstandard options
-J<flag> Pass <flag> directly to the runtime system
-Werror Terminate compilation if warnings occur
@<filename> Read options and filenames from file

注：若输入javac显示：bash: javac: 未找到命令… 则说明配置失败，检查环境变量路径是否正确。

================Tomcat安装=============
mkdir /opt/tomcat
sudo groupadd tomcat
sudo useradd -s /bin/nologin -g tomcat -d /opt/tomcat/tomcat tomcat
mkdir /root/software //创建专用于存放下载的软件，个人习惯，也可放在/usr/local下等。
cd /root/software
wget http://mirrors.tuna.tsinghua.edu.cn/apache/tomcat/tomcat-7/v7.0.82/bin/apache-tomcat-7.0.82.tar.gz
sudo tar -zxvf apache-tomcat-7.0.82.tar.gz -C /opt/tomcat/tomcat --strip-components=1
cd /opt/tomcat/tomcat
chmod -R 754 bin/
chgrp -R tomcat /opt/tomcat/tomcat
chmod -R g+r conf
chmod g+x conf
chown -R tomcat webapps/ work/ temp/ logs/

=================创建服务启动文件==================
sudo vi /etc/systemd/system/tomcat.service
-------------------------------内容如下----------------------------------------------------
[Unit]
Description=Apache Tomcat Web Application Container
After=syslog.target network.target

[Service]
Type=forking

Environment=JAVA_HOME=/usr/lib/jvm/jre
Environment=CATALINA_PID=/opt/tomcat/tomcat/temp/tomcat.pid
Environment=CATALINA_HOME=/opt/tomcat/tomcat
Environment=CATALINA_BASE=/opt/tomcat/tomcat
Environment=‘CATALINA_OPTS=-Xms512M -Xmx1024M -server -XX:+UseParallelGC‘
Environment=‘JAVA_OPTS=-Djava.awt.headless=true -Djava.security.egd=file:/dev/./urandom‘

ExecStart=/opt/tomcat/tomcat/bin/startup.sh
ExecStop=/bin/kill -15 $MAINPID

User=tomcat
Group=tomcat

[Install]
WantedBy=multi-user.target

systemctl daemon-reload //重载一下服务单元
systemctl enable tomcat.service
systemctl start tomcat.service

===========安装haveged(进程守护)====================
sudo yum install -y haveged
sudo systemctl start haveged.service
sudo systemctl enable haveged.service

访问 http://[Your-Host-IP]:8080 预览是否正常。

================配置Tomcat 管理界面==========================
sudo vi /opt/tomcat/tomcat/conf/tomcat-users.xml
-------------------------在<tomcat-users>与</tomcat-users>内输入以下内容-------------------
<role rolename="admin-gui"/>
<role rolename="manager-gui"/>
<role rolename="manager-script"/>
<role rolename="manager-jmx"/>
<role rolename="manager-status"/>
<user username="tomcat" password="s3cret" roles="admin-gui,manager-gui,manager-script,manager-jmx,manager-status"/>

sudo systemctl restart tomcat.service

==============catalina.out 日志分割===================
yum install -y cronolog
修改bin/catalina.sh文件 标红的为修改的内容，

shift
touch “$CATALINA_OUT”
if [ “$1” = “-security” ] ; then
if [ $have_tty -eq 1 ]; then
echo “Using Security Manager”
fi
shift
eval “\”$_RUNJAVA\”” “\”$LOGGING_CONFIG\”” $LOGGING_MANAGER $JAVA_OPTS $CATALINA_OPTS \
-Djava.endorsed.dirs=”\”$JAVA_ENDORSED_DIRS\”” -classpath “\”$CLASSPATH\”” \
-Djava.security.manager \
-Djava.security.policy==”\”$CATALINA_BASE/conf/catalina.policy\”” \
-Dcatalina.base=”\”$CATALINA_BASE\”” \
-Dcatalina.home=”\”$CATALINA_HOME\”” \
-Djava.io.tmpdir=”\”$CATALINA_TMPDIR\”” \
org.apache.catalina.startup.Bootstrap “[email protected]” start \

> “$CATALINA_OUT” 2>&1 “&”
else
eval “\”$_RUNJAVA\”” “\”$LOGGING_CONFIG\”” $LOGGING_MANAGER $JAVA_OPTS $CATALINA_OPTS \
-Djava.endorsed.dirs=”\”$JAVA_ENDORSED_DIRS\”” -classpath “\”$CLASSPATH\”” \
-Dcatalina.base=”\”$CATALINA_BASE\”” \
-Dcatalina.home=”\”$CATALINA_HOME\”” \
-Djava.io.tmpdir=”\”$CATALINA_TMPDIR\”” \
org.apache.catalina.startup.Bootstrap “[email protected]” start \
> “$CATALINA_OUT” 2>&1 “&”
fi
改为：
shift

touch "$CATALINA_OUT" 注释掉

if [ “$1” = “-security” ] ; then
if [ $have_tty -eq 1 ]; then
echo “Using Security Manager”
fi
shift
eval “\”$_RUNJAVA\”” “\”$LOGGING_CONFIG\”” $LOGGING_MANAGER $JAVA_OPTS $CATALINA_OPTS \
-Djava.endorsed.dirs=”\”$JAVA_ENDORSED_DIRS\”” -classpath “\”$CLASSPATH\”” \
-Djava.security.manager \
-Djava.security.policy==”\”$CATALINA_BASE/conf/catalina.policy\”” \
-Dcatalina.base=”\”$CATALINA_BASE\”” \
-Dcatalina.home=”\”$CATALINA_HOME\”” \
-Djava.io.tmpdir=”\”$CATALINA_TMPDIR\”” \
org.apache.catalina.startup.Bootstrap "[email protected]" start 2>&1 | /usr/sbin/cronolog "$CATALINA_BASE"/logs/catalina.%Y-%m-%d.out >> /dev/null &
else
eval “\”$_RUNJAVA\”” “\”$LOGGING_CONFIG\”” $LOGGING_MANAGER $JAVA_OPTS $CATALINA_OPTS \
-Djava.endorsed.dirs=”\”$JAVA_ENDORSED_DIRS\”” -classpath “\”$CLASSPATH\”” \
-Dcatalina.base=”\”$CATALINA_BASE\”” \
-Dcatalina.home=”\”$CATALINA_HOME\”” \
-Djava.io.tmpdir=”\”$CATALINA_TMPDIR\”” \
org.apache.catalina.startup.Bootstrap “[email protected]” start 2>&1 | /usr/sbin/cronolog "$CATALINA_BASE"/logs/catalina.%Y-%m-%d.out >> /dev/null &
fi

====================tomcat日志分割定期删除catalina.out=============
每天晚上11点50切割日志文件，同时删除超过30天的日志
log_path=/opt/tomcat/logs
d=date +%Y-%m-%d
d90=date -d‘30 day ago‘ +%Y-%m-%d
cd ${log_path} && cp catalina.out $log_path/cron/catalina.out.$d.log
echo > catalina.out
rm -rf $log_path/cron/catalina.out.${d90}.log

添加权限
chmod 777 /shell/log.sh
编辑crontab
crontab -e
50 23 * sh /shell/log.sh
----------------------另一种方法---------------------------
crontab -e

  • 5 find /usr/logs/ -name ".20" -ctime +7 -exec rm -rf {} \;

systemctl start tomcat7.service

===============配置访问同一个项目下不同的文件夹===========
先将原本的<host>配置注释掉，然后新增如下内容：
<Host name="hhcp.itrxm.com" appBase="webapps" unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false">
<Context path="" docBase="/data/tomcat/tomcat/webapps/ROOT" debug="0" reloadable="true" />
</Host>
<Host name="hhcphb.itrxm.com" appBase="webapps" unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false">
<Context path="" docBase="/data/tomcat/tomcat/webapps/HBH5" debug="0" reloadable="true" />
</Host>

================SSL环境搭建==================================
在nginx的conf中，进行做对应的修改
server {
listen 80;
server_name 域名地址;
rewrite ^(.*)$ https://$host$1 permanent;
}

server {
listen 443;
server_name x;
ssl on;
ssl_certificate /etc/nginx/vhost/ssl/certificate.crt;
ssl_certificate_key /etc/nginx/vhost/ssl/private.key;
ssl_session_timeout 5m;
ssl_protocols TLSv1;
ssl_ciphers HIGH:!aNULL:!MD5;
ssl_prefer_server_ciphers on;

     location / {
          client_max_body_size    16m;
          client_body_buffer_size 128k;
          proxy_pass                          http://IP地址:8080;
          proxy_set_header        Host $host;
          proxy_set_header        X-Real-IP $remote_addr;
          proxy_set_header        X-Forwarded-For $proxy_add_x_forwarded_for;
      proxy_set_header           X-Forwarded-Proto https;
          proxy_next_upstream   off;

          proxy_connect_timeout   30;
          proxy_read_timeout      300;
          proxy_send_timeout      300;
    }
}

在tomcat 中的server.xml中修改：

-->
修改为：

并新加节点：

重启tomcat服务
systemctl restart tomcat.service
注：没有若只有key及crt文件的证书，可以进入
https://www.myssl.cn/tools/merge-pfx-cert.html
中进行生成一个pfx文件的证书，并设置一个密码。
=================通过VisualVM对Tomcat性能监控==================
JMX下载地址：http://mirrors.tuna.tsinghua.edu.cn/apache/tomcat/tomcat-7/v7.0.81/bin/extras/catalina-jmx-remote.jar
catalina-jmx-remote.jar包下载完成后放到Tomcat的lib目录下
vim catalina.sh
----------------------------------在注释下面添加如下内容------------------------------------
CATALINA_OPTS="$CATALINA_OPTS -Dcom.sun.management.jmxremote
-Dcom.sun.management.jmxremote.port=7090
-Dcom.sun.management.jmxremote.ssl=false
-Djava.rmi.server.hostname=被监控的服务器IP地址
-Dcom.sun.management.jmxremote.authenticate=true
-Dcom.sun.management.jmxremote.password.file=/var/tomcat/tomcat/conf/jmxremote.password
-Dcom.sun.management.jmxremote.access.file=/var/tomcat/tomcat/conf/jmxremote.access"
-------------------------------------------------------------------------------------------------------------
cd /var/tomcat/tomcat/conf
vim jmxremote.access
-------------------------------------------------------------------------
monitorRole readonly
controlRole readwrite
---------------------------------------------------------------------------
vim jmxremote.password //要与运行tomcat的权限一致
-----------------------------------------------------------------------
monitorRole 25DWdl2&D^W
controlRole 25DWdl2&D^W
------------------------------------------------------------------------
chmod 0400 jmxremote.password //密码文件应该是只读的，只能由Tomcat运行用户
systemctl restart tomcat.service
至此，整套环境及系统搭建部署完毕。

原文地址：http://blog.51cto.com/ankey/2083508

时间： 2024-10-08 14:28:17

CentOS+Nginx+Tomcat+Mysql+PHP 环境搭建及系统部署的相关文章

[zz]阿里云计算：CentOS+nginx+Django+Postgresql web环境搭建

原文链接: http://www.cnblogs.com/AllStarGIS/p/3788518.html 参考链接: 1. http://www.cnblogs.com/zhouej/archive/2012/03/25/2379646.html 2. http://ec58.com/archives/2836 最近在在万网和阿里云上分别购买了一个域名和一台云服务器,打算用来做点什么.昨天吃完晚饭稍作休息开始对这个新奇的玩意作了些了解并着手配置其运行环境,今早凌晨4点多才弄得7788,为此也

linux下nginx+php+mysql 自助环境搭建

++++++++++++++++++++++++++++++++++++++++++++++linux下nginx+php+mysql环境搭建++++++++++++++++++++++++++++++++++++++++++++++操作系统 : [CentOS6.0]服务器 : [nginx-1.1.8]PHP : [php-5.2.6]数据库 : [mysql-5.1.59]++++++++++++++++++++++++++++++++++++++++++++++准备安装软件(downlo

NGINX+PHP+MYSQL服务器环境搭建

这条命令是配置vim的,请确保你能访问github wget -qO- https://raw.github.com/ma6174/vim/master/setup.sh | sh 说明有一些小问题,配置过程中很容易自己修改,自己注意 准备篇: CentOS 7.0系统安装配置图解教程 http://www.centoscn.com/image-text/setup/2014/0724/3342.html 一.配置防火墙,开启80端口.3306端口 CentOS 7.0默认使用的是firewal

搭建nginx + tomcat + mysql + memcached 环境.

拓普图如下 java程序 需要 运行在tomcat上, tomcat 就是一个java程序. 这个java程序,是需要运行在java的虚拟机上. 所以,我们要在安装tomcat的节点上,安装java虚拟机,即安装jdk环境. 在172.16.26.5 [6 ] 两个集群节点上都装上memcached服务. 以及tomcat服务. 由172.16.26.1使用nginx作为调度节点. 172.16.26.1 nginx 的配置 upstream www.tomcat1.com { server 1

Linux下JDK Tomcat MySQL基本环境搭建

1. 安装JDK 1.上传jdk-7u45-linux-x64.tar.gz到Linux上 2.解压jdk到/usr/local目录 tar -zxvf jdk-7u45-linux-x64.tar.gz -C /usr/local/ 3.设置环境变量,在/etc/profile文件最后追加相关内容 vi /etc/profile export JAVA_HOME=/usr/local/jdk1.7.0_45 export PATH=$PATH:$JAVA_HOME/bin 4.刷新环境变量 s

转】Nginx+tomcat集群环境搭建（Windows下）

原博文出自于:    http://blog.csdn.net/clj198606061111/article/details/22621003       感谢! 实验环境 windows xp sp3 Nginx版本:1.5.12: 下载地址:http://nginx.org/en/download.html Tomcat版本:6.0.39 下载地址:http://tomcat.apache.org/download-60.cgi 一.配置nginx 1.  在D盘根目录建立nginx文件夹

Linux Debian 下LNMP服务器——nginx+mysql+php环境搭建及配置

昨天刚给公司服务器装了LNMP服务器环境,在这里简单记录一下过程备忘. 这里我在安装的时候是用的Dotdeb源,仅供参考. 1.导入Dotdeb源,据说Dotdeb源里的软件版本比较新. 在向源中导入Dotdeb前,我们需要先获取GnuPG key并导入: wget http://www.dotdeb.org/dotdeb.gpg cat dotdeb.gpg | apt-key add - 提示OK,表明导入成功.然后我们开始导入Dotdeb源,源列表的位置在“/etc/apt/sources

Nginx+Tomcat的服务器端环境配置详解

这篇文章主要介绍了Nginx+Tomcat的服务器端环境配置详解,包括Nginx与Tomcat的监控开启方法,需要的朋友可以参考下 Nginx+tomcat是目前主流的Javaweb架构,如何让nginx+tomcat同时工作呢,也可以说如何使用nginx来反向代理tomcat后端均衡呢?直接安装配置如下: 1.Java JDK安装: #下载相应的jdk软件包,然后解压安装,我这里包名称为:jdk-7u25-Linux-x64.tar.gz ? 1 tar -xzf jdk-7u25-linux

jenkins + Tomcat 持续集成环境搭建

今天在跑selenium用例时需要用到导入数据库来恢复数据,以便每次测试都保持环境是有效数据,于是想到了jenkins,这里简单介绍一下tomcat + jenkins的环境搭建: 步骤一.下载符合版本的jdk7,触压到某个目录,设置好JAVA_HOME并加入path. 步骤二.下载tomcat,这里使用的是apache-tomcat-7.0.42步骤三.下载Jenkins,把Jenkins.war放入tomcat的webapps目录下,启动tomcat,通过http://localhost:8