centos6.5安装conky

环境centos6.5

首先 yum install conky

如果你此时 在终端直接conky会直接掉调用默认的配置,配置在/etc/conky/conky.conf下

我们可以使用自己的配置将配置文件写在主目录下

# set to yes if you want Conky to be forked in the background
 background yes

cpu_avg_samples 2
net_avg_samples 2

out_to_console no

 # X font when Xft is disabled, you can pick one with program xfontsel
#font 7x12
#font 6x10
#font 7x13
#font 8x13
#font 7x12
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*
#font -artwiz-snap-normal-r-normal-*-*-100-*-*-p-*-iso8859-1

# Use Xft?
 use_xft yes

 # Xft font when Xft is enabled
 xftfont Sans:size=8

own_window_transparent no
#own_window_colour hotpink
# Text alpha when using Xft
xftalpha 0.8

# on_bottom yes

# mail spool
mail_spool $MAIL

# Update interval in seconds
update_interval 1
# Create own window instead of using desktop (required in nautilus)
own_window yes
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
own_window_type override

# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes

# Minimum size of text area
minimum_size 260 5
maximum_width 260

# Draw shades?
draw_shades no

# Draw outlines?
draw_outline no

# Draw borders around text
draw_borders no

# Stippled borders?
stippled_borders no

# border margins
border_margin 4

# border width
border_width 1

# Default colors and also border colors
default_color white
default_shade_color white
default_outline_color white

# Text alignment, other possible values are commented
#alignment top_left
#minimum_size 10 10
gap_x 5
gap_y 2
alignment top_right
#alignment bottom_left
#alignment bottom_right

# Gap between borders of screen and text

# Add spaces to keep things from moving about?  This only affects certain objects.
use_spacer none

# Subtract file system buffers from used memory?
no_buffers yes

# set to yes if you want all text to be in uppercase
uppercase no

# none, xmms, bmp, audacious, infopipe (default is none)
# xmms_player bmp

# boinc (seti) dir
# seti_dir /opt/seti

# Possible variables to be used:
#
#      Variable         Arguments                  Description
#  acpiacadapter                     ACPI ac adapter state.
#  acpifan                           ACPI fan state
#  acpitemp                          ACPI temperature.
#  adt746xcpu                        CPU temperature from therm_adt746x
#  adt746xfan                        Fan speed from therm_adt746x
#  battery           (num)           Remaining capasity in ACPI or APM
#                                    battery. ACPI battery number can be
#                                    given as argument (default is BAT0).
#  buffers                           Amount of memory buffered
#  cached                            Amount of memory cached
#  color             (color)         Change drawing color to color
#  cpu                               CPU usage in percents
#  cpubar            (height)        Bar that shows CPU usage, height is
#                                    bar's height in pixels
#  downspeed         net             Download speed in kilobytes
#  downspeedf        net             Download speed in kilobytes with one
#                                    decimal
#  exec              shell command   Executes a shell command and displays
#                                    the output in torsmo. warning: this
#                                    takes a lot more resources than other
#                                    variables. I'd recommend coding wanted
#                                    behaviour in C and posting a patch :-).
#  execi             interval, shell Same as exec but with specific interval.
#                    command         Interval can't be less than
#                                    update_interval in configuration.
#  fs_bar            (height), (fs)  Bar that shows how much space is used on
#                                    a file system. height is the height in
#                                    pixels. fs is any file on that file
#                                    system.
#  fs_free           (fs)            Free space on a file system available
#                                    for users.
#  fs_free_perc      (fs)            Free percentage of space on a file
#                                    system available for users.
#  fs_size           (fs)            File system size
#  fs_used           (fs)            File system used space
#  hr                (height)        Horizontal line, height is the height in
#                                    pixels
#  i2c               (dev), type, n  I2C sensor from sysfs (Linux 2.6). dev
#                                    may be omitted if you have only one I2C
#                                    device. type is either in (or vol)
#                                    meaning voltage, fan meaning fan or temp
#                                    meaning temperature. n is number of the
#                                    sensor. See /sys/bus/i2c/devices/ on
#                                    your local computer.
#  kernel                            Kernel version
#  loadavg           (1), (2), (3)   System load average, 1 is for past 1
#                                    minute, 2 for past 5 minutes and 3 for
#                                    past 15 minutes.
#  machine                           Machine, i686 for example
#  mails                             Mail count in mail spool. You can use
#                                    program like fetchmail to get mails from
#                                    some server using your favourite
#                                    protocol. See also new_mails.
#  mem                               Amount of memory in use
#  membar            (height)        Bar that shows amount of memory in use
#  memmax                            Total amount of memory
#  memperc                           Percentage of memory in use
#  new_mails                         Unread mail count in mail spool.
#  nodename                          Hostname
#  outlinecolor      (color)         Change outline color
#  pre_exec          shell command   Executes a shell command one time before
#                                    torsmo displays anything and puts output
#                                    as text.
#  processes                         Total processes (sleeping and running)
#  running_processes                 Running processes (not sleeping),
#                                    requires Linux 2.6
#  shadecolor        (color)         Change shading color
#  stippled_hr       (space),        Stippled (dashed) horizontal line
#                    (height)
#  swapbar           (height)        Bar that shows amount of swap in use
#  swap                              Amount of swap in use
#  swapmax                           Total amount of swap
#  swapperc                          Percentage of swap in use
#  sysname                           System name, Linux for example
#  time              (format)        Local time, see man strftime to get more
#                                    information about format
#  totaldown         net             Total download, overflows at 4 GB on
#                                    Linux with 32-bit arch and there doesn't
#                                    seem to be a way to know how many times
#                                    it has already done that before torsmo
#                                    has started.
#  totalup           net             Total upload, this one too, may overflow
#  updates                           Number of updates (for debugging)
#  upspeed           net             Upload speed in kilobytes
#  upspeedf          net             Upload speed in kilobytes with one
#                                    decimal
#  uptime                            Uptime
#  uptime_short                      Uptime in a shorter format
#
#  seti_prog                         [email protected] current progress
#  seti_progbar      (height)        [email protected] current progress bar
#  seti_credit                       [email protected] total user credit

# variable is given either in format $variable or in ${variable}. Latter
# allows characters right after the variable and must be used in network
# stuff because of an argument
#${font Dungeon:style=Bold:pixelsize=10}I can change the font as well
#${font Verdana:size=10}as many times as I choose
#${font Perry:size=10}Including UTF-8,
# stuff after 'TEXT' will be formatted on screen
#${font Grunge:size=12}${time %a  %b  %d}${alignr -25}${time %k:%M}

TEXT
${color green} ${font PizzaDude Bullets:size=16}?${font :size=10}  Date&Time $hr $font$color${goto 1000}${time %l:%M}${font}${time %p}
${time %A, %e %B %Y}

${color green}${font OpenLogos:size=18} W${font :size=10}   SYSTEM $hr $font $color
Hostname: $alignr$nodename
Kernel: $alignr$kernel
Uptime: $alignr$uptime
Temp: ${alignr}${acpitemp}°C
CPU: ${alignr}${freq dyn} MHz
Processes: ${alignr}$processes ($running_processes running)
Load: ${alignr}$loadavg
${color}battery_percent:${battery_percent BAT0}%${alignr}battery_time:${if_match "${acpiacadapter}"=="on-line"}(外接电源)${else}${battery_time BAT0}${endif}
${if_match ${battery_percent BAT0}>75}${else}${if_match ${battery_percent BAT0}<20}${else}${endif}${endif}${battery_bar BAT0}
CPU1 ${alignr}${cpu cpu1}%
${cpubar 4 cpu1}
CPU2 ${alignr}${cpu cpu2}%
${cpubar 4 cpu2}
Ram ${alignr}$mem / $memmax ($memperc%)
${membar 4}
swap ${alignr}$swap / $swapmax ($swapperc%)
${swapbar 4}
${color blue}Highest CPU $alignr CPU%  MEM% $color
${top name 1}$alignr${top cpu 1}   ${top mem 1}
${top name 2}$alignr${top cpu 2}   ${top mem 2}
${top name 3}$alignr${top cpu 3}   ${top mem 3}
${color blue}Highest MEM $alignr CPU%  MEM% $color
${top_mem name 1}$alignr${top_mem cpu 1}   ${top_mem mem 1}
${top_mem name 2}$alignr${top_mem cpu 2}   ${top_mem mem 2}
${top_mem name 3}$alignr${top_mem cpu 3}   ${top_mem mem 3}

${color green} ${font PizzaDude Bullets:size=16}J${font :size=10}   HDD $hr $font $color
Root: ${alignr}${fs_free /} / ${fs_size /}
${fs_bar 4 /}
Usr: ${alignr}${fs_free /usr} / ${fs_size /usr}
${fs_bar 4 /usr}

${color green} ${font PizzaDude Bullets:size=16}X${font :size=10}   NETWORK $hr $font $color
$color Local IP: $alignr${addr wlan0}
$color Download: ${downspeedf wlan0} KB/s $alignr total: ${totaldown wlan0}
$color Upload: ${upspeedf wlan0} KB/s $alignr total:${totalup wlan0}

${color green} ${font PizzaDude Bullets:size=16}?${font :size=10}   WEATHER $hr $font $color

${goto 12}今天:${execi 10800 ~/.config/wjx.sh}
#${goto 12}明天:${execi 10800 ~/.config/wjx.sh}

wjx.sh

#!/bin/sh
URL=http://www.baidu.com/s?wd=%CC%EC%C6%F8
baidutq=/tmp/wjx
w3m -dump $URL > $baidutq

#cat -n /tmp/mypogoda |grep "? 分时温度"

#text=`head -n 118 /tmp/wjx |tail -n 49`
#echo $text
#`more "$text"`

#var=`echo "$text"|awk -F '周' '{print $2}' `
#echo $var

var=`cat "$baidutq" |grep "实时:"`
echo $var

其他配置

background yes
use_xft yes
xftfont Zecton:size=8
xftalpha 0.5
update_interval 1.0
total_run_times 0
double_buffer yes

no_buffers no
own_window yes
own_window_transparent yes
own_window_type override
own_window_hints undecorate,sticky,skip_taskbar,skip_pager
minimum_size 500 5
maximum_width 200
draw_shades yes
draw_outline no
draw_borders no
default_color lightgrey
alignment top_right
gap_x 15
gap_y 3
uppercase no
override_utf8_locale yes

TEXT
${color white} ${font PizzaDude Bullets:size=16}V${font :size=10}   Date&Time $hr $font $color
${goto 1000}${time %l:%M}${font}${time %p}
${time %A, %e %B %Y}

${color white}${font OpenLogos:size=18} I${font :size=10}   SYSTEM $hr $font
$color $font$sysname: ${alignr} $kernel ($machine)
$color Battery: ${alignr}$battery_time

${color white} ${font StyleBats:size=16}V${font :size=10}   CPU $hr $font $color
$color ${font}[email protected]${freq}MHz: ${cpu cpu1}% ${alignr}${cpubar cpu1 8,60}
$color ${top name 1} $alignr ${top cpu 1}%
$color ${top name 2} $alignr ${top cpu 2}%

${color white}${font StyleBats:size=16}E${font :size=10}   MEMORY $hr $font $color
${color}${font}RAM: $mem/$memmax $alignr $memperc%
$color ${membar}
${color}${font}Swap: $swap/$swapmax $alignr $swapperc%
$color ${swapbar}
$color ${top_mem name 1} $alignr ${top_mem mem 1}%
$color ${top_mem name 2} $alignr ${top_mem mem 2}%

${color white} ${font PizzaDude Bullets:size=16}K${font :size=10}   HDD $hr $font $color
$color root: ${fs_used /}/${fs_size /} $alignr ${fs_free_perc /}%
$color ${fs_bar /}
$color usr: ${fs_used /usr}/${fs_size /usr} $alignr ${fs_free_perc /usr}%
$color ${fs_bar /usr}
$color opt: ${fs_used /opt}/${fs_size /opt} $alignr ${fs_free_perc /opt}%
$color ${fs_bar /opt}
$color boot: ${fs_used /boot}/${fs_size /boot} $alignr ${fs_free_perc /boot}%
$color ${fs_bar /boot}

${color white} ${font PizzaDude Bullets:size=16}@${font :size=10}   NETWORK $hr $font $color
$color Local IP: $alignr${addr wlan0}
$color Download: ${downspeedf wlan0} KB/s $alignr ${totaldown wlan0}
$color Upload: ${upspeedf wlan0} KB/s $alignr ${totalup wlan0}

${color white} ${font PizzaDude Bullets:size=16}@${font :size=10}   Weather $hr $font $color
$color Skies are: ${alignr}${weather http://weather.noaa.gov/pub/data/observations/metar/stations/ EFTP cloud_cover}
$color Winds from the: ${alignr}${weather http://weather.noaa.gov/pub/data/observations/metar/stations/ EFTP wind_dir}
$color Winds speed: ${alignr}${weather http://weather.noaa.gov/pub/data/observations/metar/stations/ EFTP wind_speed} km/h
$color Humidity: ${alignr}${weather http://weather.noaa.gov/pub/data/observations/metar/stations/ EFTP humidity}% relative humidity
$color Temperature: ${alignr}${weather http://weather.noaa.gov/pub/data/observations/metar/stations/ EFTP temperature}C
# Conky settings #
background no
update_interval 1

cpu_avg_samples 4
net_avg_samples 2

override_utf8_locale yes

double_buffer yes
no_buffers yes

text_buffer_size 2048
#imlib_cache_size 0

temperature_unit fahrenheit

# Window specifications #

own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below

border_inner_margin 0
border_outer_margin 0

minimum_size 100 150
maximum_width 200

alignment tr
gap_x 3
gap_y 2

# Graphics settings #
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no

# Text settings #
use_xft yes
xftfont caviar dreams:size=8
xftalpha 0.5

uppercase no

temperature_unit celsius

default_color FFFFFF

# Lua Load  #
lua_load ~/.conky/clock_rings.lua
lua_draw_hook_pre clock_rings

TEXT
${voffset 8}${color FF6600}${font Monospace:style=Bold:size=16}${time %A}${font}${voffset -8}${alignr 50}${color FFFFFF}${font caviar dreams:size=38}${time %e}${font}
${color FFFFFF}${voffset -30}${color FFFFFF}${font Monospace:style=Bold:size=18}${time %b}${font}${voffset -3} ${color FFFFFF}${font caviar dreams:size=20}${time %Y}${font}${color FF6600}${hr}
${voffset 140}${font Monospace:style=Bold:size=10}${alignr}当前温度${font}
${font caviar dreams:size=12}${color FFFFFF}${alignr}${weather http://weather.noaa.gov/pub/data/observations/metar/stations/ ZHCC temperature temperature 30} °C${font}

${color EE8262}${goto 25}${voffset 35}${cpu cpu0}%
${color FF6600}${goto 25}CPU0
${color CD950C}${goto 50}${voffset 23}${cpu cpu1}%
${color FF6600}${goto 50}CPU1
${color 228B22}${goto 75}${voffset 23}${cpu cpu2}%
${color FF6600}${goto 75}CPU2
${color 00FF00}${goto 100}${voffset 23}${cpu cpu3}%
${color FF6600}${goto 100}CPU3

#${color 00FF00}${goto 110}${voffset 30}${downspeed eth0}${goto 165}${downspeed wlan0}
#${color FF6600}${goto 110}${upspeed eth0}${goto 165}${upspeed wlan0}
#${color FF6600}${font Monospace:style=Bold:size=8}${goto 125}网络流量
网络流量:
IP address: $alignr${addr wlan0}
Download: $alignr ${downspeed wlan0}/s
Upload: $alignr ${upspeed wlan0}/s

${color FFFFFF}${font Monospace:style=Bold:size=9}运行时间: ${uptime_short} ${goto 110}物理内存: ${memperc}%
${color FFFFFF}进程总数: ${processes} ${goto 110}虚拟内存: ${swapperc}%
${color FFFFFF}运行中: ${running_processes} ${goto 110}磁盘使用: ${fs_used_perc /}%
#${color 00FF00}${font caviar dreams:size=8}${alignr}${nodename}
${color 00FF00}${font caviar dreams:size=8}${alignr}Release: ${pre_exec cat /etc/redhat-release}$machine
${color 00FF00}${font caviar dreams:size=8}${alignr}Kernel: ${kernel}
时间: 2024-10-20 20:46:40

centos6.5安装conky的相关文章

如何在CentOS6上安装Python2.7和Python3.3

原文来自http://toomuchdata.com/2014/02/16/how-to-install-python-on-centos/,个人觉得对在linux安装新版本Python是很有参考意义,因而转载,原文是英文的,本人简单翻译下,大家看懂即可,有不妥的地方请留言. 如何在CentOS 6上同时安装Python 2.7和Python 3.3 本文将介绍如何在CentOS 6上安装Python 2.7和3.3.下面以Python 2.7.6和Python 3.3.5为例进行说明,但本人实

centos6.5安装docker

centos6.5 安装docker 防伪码:吃的苦中苦,方为人上人! 前言:在当今的主流社会中,docker和openstatick是一大主流方向,下面为大家讲解理论知识和实际操作现实中的docker! 理论知识: 相信大家都知道docker是什么?那在这里就不多说了! Docker 基于 Go 语言开发,代码托管在Github上,并遵循Apache 2.0 开源协议. docker的专业叫法是应用容器(Application Container). 为什么要使用docker? 1 .快速交付

CentOS6.5 安装+ Tengine + PHP + MySQL

centos6.5安装+Tengine+php+mysql

Centos6.4 安装fail2ban防暴力破解

Centos6.4 安装fail2ban防暴力破解 一. 安装 curl -O https://codeload.github.com/fail2ban/fail2ban/tar.gz/0.9.0 mv 0.9.0 0.9.0.tar.gz tar zxvf 0.9.0.tar.gz cd fail2ban-0.9.0/ python setup.py build python setup.py install 二.配置(防ssh暴力) vi /etc/fail2ban/jail.conf [s

CentOS-6.5安装配置JDK-7

安装说明 系统环境:centos-6.5 安装方式:rpm安装 软件:jdk-7-linux-x64.rpm 下载地址:http://www.oracle.com/technetwork/java/javase/downloads/java-se-jdk-7-download-432154.html 注:rpm,gz文件区别 初接解Linux的朋友一定对软件的安装特别头疼,同样都是for Linux,但RPM.tar.gz.DEB包还是有很大区别的,这种区别很有可能使你的安装过程进行不下去.那我

centos6.5安装和配置cobbler

Cobbler介绍 Cobbler 是一个系统启动服务(boot server),可以通过网络启动(PXE)的方式用来快速安装.重装物理服务器和虚拟机,支持安装不同的 Linux 发行版和 Windows.该工具使用python开发,小巧轻便(才15k行代码),使用简单的命令即可完成PXE网络安装环境的配置,同时还可以管理 DHCP,DNS,以及yum包镜像. Cobbler 使用命令行方式管理,也提供了基于 Web 的界面管理工具(cobbler-web),还提供了API接口,可以方便二次开发

CentOS6.4安装python2.7.3环境和Tornado

Centos6.4默认的python环境是2.6.6.我们可以自己安装Python 2.7.3. 但是值得注意的是,我们必须不能破坏系统的环境. 因为几个关键的实用应用程序依赖于Python2.6.6. 如果替换了系统的python环境就会发生很多难以预见的错误,导致要重装系统. 在没有破坏系统的python环境的情况下安装Python 2.7.3. 执行以下命令,请使 用root的身份登录或者使用sudo命令 一.安装Python 2.7.3 1. 安装开发工具 为了编辑Python,你必须要

CentOS6.5安装Cacti统计图乱码解决

这个就是rrdtool调用字体失败 安装字体即可 [[email protected] -]# yum -y install  cjkuni-ukai-fonts #安装字体 [[email protected] -]# fc-cache -f -v #刷新字体哦缓存 CentOS6.5安装Cacti统计图乱码解决,布布扣,bubuko.com

centos6.4安装lvs+keepalive

环境说明: [[email protected] html]# uname -a Linux db 2.6.32-358.el6.x86_64 #1 SMP Fri Feb 22 00:31:26 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux [[email protected] html]# cat /etc/redhat-release  CentOS release 6.4 (Final) lvs安装部署: 1.查看内核模块是否支持 lsmod | gre