QS之force(3)

Example in project

- First force signals in certain time and then noforce signals after some time.

 1 #=================================================
 2 # Load program into pmem
 3 #=================================================
 4 do ../...LoadProgram.tcl
 5 LoadProgram  ../...Program.dat   XXXX
 6
 7 #=================================================
 8 # Force signals for error detect
 9 #=================================================
10 # force address
11 when {$now == 8ms} {
12   force -freeze tb_mspmemperip:mut:DMEM:DMEM_ADDR(5) 1
13 }
14
15 when {$now == 10ms} {
16   noforce tb_mspmemperip:mut:DMEM:DMEM_ADDR(5)
17 }
18
19 # force data input
20 when {$now == 16ms} {
21   force -freeze tb_mspmemperiph:mut:DMEM:DMEM_DIN(12) 1
22 }
23
24 when {$now == 20ms} {
25   noforce tb_mspmemperiph:mut:DMEM:DMEM_DIN(12)
26 }
27
28
29 #=================================================
30 # Run sim
31 #=================================================
32 run 25 ms
33 wave zoom full