#!/bin/bash
#set -x
# made by Micky1979 on 07/05/2016 based on Slice, Zenith432, STLVNUB, JrCs, cvad, Rehabman, and ErmaC works
# Tested in OSX using both GNU gcc and clang (Xcode 6.4, 7.2.1, 7.3.1 and Xcode 8).
# Preferred OS is El Capitan with Xcode >= 7.3.1 and Sierra with Xcode >= 8.
# In older version of OS X is better to use GNU gcc.
# Tested in linux Ubuntu (16.04 and 16.10) / Debian Jessie amd64 (x86_64).
# This script install all missing dependencies in the iso images you
# can download at the official download page here: http://releases.ubuntu.com/16.04/ubuntu-16.04.1-desktop-amd64.iso
# where nasm, subversion, curl (wget if installed is used as replacement) and or uuid-dev headers are missing.
# gcc 5.4 coming with Ubuntu 16.04 is well compiled for Clover, so no need to make a "cross" compilation of it, and
# I hope will be the same for future version installed here. Debian Jessie instead use gcc 4.9.2 and is already good.
# Note that Debian comes without "sudo" installed (you well know this), but this script require dependecies
# described above so that you have install them by your self, or install sudo and enable it for your account.
#
# May you have apported radical and incompatible changes to your installation, but this is not my fault!
# New incoming release of Ubuntu/Debian should be compatible as well..
#
# Big thanks to the following testers:
# droples, Riley Freeman, pico joe, fantomas1, Fljagd, calibre, Mork vom Ork, Maniac10, Matgen84,
# Sherlocks, ellaosx, magnifico, AsusFreak, badruzeus, LabyOne, Ukr55, D-an-W, SavageAUS, bronxteck,
# artur_pt
# and all others (I‘ll be happy to increase this list and to not forgot anyone)
#
# --------------------------------------
SCRIPTVER="v4.5.6"
export LC_ALL=C
SYSNAME="$( uname )"
BUILDER=$USER # don‘t touch!
# ---------------------------->
# default behavior (don‘t touch these vars)
NASM_PREFERRED="2.13.01"
FORCEREBUILD=""
MAKEPKG_CMD="make pkg"
UPDATE_FLAG="YES"
BUILD_FLAG="NO"
LTO_FLAG="" # default for Xcode >= 7.3, will automatically adjusted for older ones
MOD_PKG_FLAG="YES" # used only when you add custom macros. Does nothing for normal build.
ARCH="IA32_X64" # will ask if you want IA32 (deprecated) or X64 only
DEFINED_MACRO=""
CUSTOM_BUILD="NO"
START_BUILD=""
TIMES=0
ForceEDK2Update=0 # cause edk2 to be re-updated again if > 0 (handeled by the script in more places)
SYMLINKPATH=‘/usr/local/bin/buildclover‘
SCRIPT_ABS_PATH=""
SCRIPT_ABS_LOC=""
DOWNLOADER_CMD=""
DOWNLOADER_PATH=""
SELF_UPDATE_OPT="NO" # show hide selfUpdate option
PING_RESPONSE="NO" # show hide option with connection dependency
REMOTE_EDK2_REV="" # info for developer submenu this mean to show latest rev avaiable
edk2array=(
MdePkg
MdeModulePkg
CryptoPkg
DuetPkg
EdkCompatibilityPkg
IntelFrameworkModulePkg
IntelFrameworkPkg
OvmfPkg
OptionRomPkg
PcAtChipsetPkg
ShellPkg
UefiCpuPkg
FatPkg
BaseTools
)
# ---------------------------->
# additional macro to compile Clover EFI
macros=(
USE_APPLE_HFSPLUS_DRIVER
USE_BIOS_BLOCKIO
DISABLE_USB_SUPPORT
NO_GRUB_DRIVERS
NO_GRUB_DRIVERS_EMBEDDED
ONLY_SATA_0
DISABLE_UDMA_SUPPORT
ENABLE_VBIOS_PATCH_CLOVEREFI
ENABLE_PS2MOUSE_LEGACYBOOT
DEBUG_ON_SERIAL_PORT
ENABLE_SECURE_BOOT
USE_ION
DISABLE_USB_MASS_STORAGE
ENABLE_USB_OHCI
ENABLE_USB_XHCI
REAL_NVRAM
)
# defaults for all the variables, taken from the config file
var_defaults=(
"XCODE",,,
"GNU",,,
"Build_Tool",,,"XCODE"
"SUGGESTED_CLOVER_REV",,,
"MODE",,,"S"
"DEFAULT_MACROS",,,"-D NO_GRUB_DRIVERS_EMBEDDED"
"PATCHES",,,"$HOME/CloverPatches"
"BUILD_PKG",,,"YES"
"BUILD_ISO",,,"NO"
"USEHFSPLUS",,,"NO"
"USEAPFS",,,"NO"
"USENTFS",,,"NO"
"GITHUB",,,"https://raw.githubusercontent.com/Micky1979/Build_Clover/master/Build_Clover.command"
"CLOVER_REP",,,"svn://svn.code.sf.net/p/cloverefiboot/code"
"EDK2_REP",,,"svn://svn.code.sf.net/p/edk2/code/trunk/edk2"
"DISABLE_CLEAR",,,"NO"
"MY_SCRIPT",,,
"FAST_UPDATE",,,"NO"
)
# --------------------------------------
# FUNCTIONS
# --------------------------------------
usage () {
printf "\n\e[1m%s\e[0m" "Usage: $0 [--edk2rev <revision>] [--defaults]"
echo
printf "\n%s" "The following optional arguments are recognized:"
echo
printf "\n\e[1m%s\e[0m\t%s" "--edk2rev <revision>" "Overrides the defauls EDK2 revision. If <revision> is ommited or not numeric-only,"
printf "\n\t\t\t%s" "the default EDK2 revision will be used instead."
echo
printf "\n\e[1m%s\e[0m\t\t%s" "--defaults" "Ignores the config file and loads the default values for all settings in that file."
echo
printf "\n\e[1m%s\e[0m\t\t%s" "--cfg <path>" "Overrides the path to the config file. If <path> is ommited or doesn‘t exist,"
printf "\n\t\t\t%s" "the \$HOME / \$BUILD_CLOVER_CFG_PATH variables will be used instead."
echo
printf "\n%s" "If no argument is provided, the script starts in interactive mode, using the default edk2 revision"
printf "\n%s" "and the settings from the config file."
echo
}
ClearScreen() {
if [[ "$DISABLE_CLEAR" != "YES" ]]; then clear; fi
}
LoadDefaults () {
for i in "${var_defaults[@]}"
do
eval "export \"${i%,,,*}=${i#*,,,}\""
done
}
CreateDefaultConf () {
if [[ ! -f "${userconf}" ]]; then touch "${userconf}"; fi
for i in "${var_defaults[@]}"
do
echo "${i%,,,*}=${i#*,,,}" >> "${userconf}"
done
}
ReadConf () {
for i in "${var_defaults[@]}"
do
if cat "${userconf}" | grep "^${i%,,,*}=" 1>/dev/null 2>&1; then
# echo "Variable ${i%,,,*} found, loading..."
eval "export \"$(cat ${userconf} | grep ^${i%,,,*}=)\""
else
# echo "Variable ${i%,,,*} not found in config, restoring defaut value..."
echo "${i%,,,*}=${i#*,,,}" >> "${userconf}"
eval "export \"${i%,,,*}=${i#*,,,}\""
fi
done
}
CheckProprietary() {
local drivers_off="${DIR_MAIN}/edk2/Clover/CloverPackage/CloverV2/drivers-Off"
local ghlink="https://github.com/Micky1979/Build_Clover/raw/work/Files"
local efifiles=()
if [[ "$USEHFSPLUS" == "YES" ]]; then efifiles+=(‘HFSPlus_ia32.efi‘); efifiles+=(‘HFSPlus_x64.efi‘); fi
if [[ "$USEAPFS" == "YES" ]]; then efifiles+=(‘apfs.efi‘); fi
if [[ "$USENTFS" == "YES" ]]; then efifiles+=(‘NTFS.efi‘); fi
if [[ "${#efifiles[@]}" -ge "1" ]]; then
printMessage "The following proprietary EFI drivers will be added to the Clover package:"
printWarning "\n${efifiles[*]}\n"
else
return 0
fi
for fname in "${efifiles[@]}"
do
if [[ ! -f "${DIR_MAIN}/tools/${fname}" ]]; then
printWarning "\n${fname} not found, downloading..."
downloader "${ghlink}/${fname}" "${DIR_MAIN}/tools" "${fname}"
fi
printMessage "\nAdding ${fname}..."
if [[ "${fname}" == *"_ia32"* ]]; then
if [[ -d "${drivers_off}/drivers32" ]]; then
cp -f "${DIR_MAIN}/tools/${fname}" "${drivers_off}/drivers32/${fname//_ia32/-32}"
else
printWarning "\ndrivers32 not found, maybe that arch hasn‘t been selected, skipping..."
fi
else
if [[ -d "${drivers_off}/drivers64" ]]; then
if [[ "${fname}" == *"_x64"* ]]; then
cp -f "${DIR_MAIN}/tools/${fname}" "${drivers_off}/drivers64/${fname//_x64/-64}"
else
cp -f "${DIR_MAIN}/tools/${fname}" "${drivers_off}/drivers64/${fname//.efi/-64.efi}"
fi
else
printWarning "\ndrivers64 not found, maybe that arch hasn‘t been selected, skipping..."
fi
if [[ -d "${drivers_off}/drivers64UEFI" ]]; then
if [[ "${fname}" == *"_x64"* ]]; then
cp -f "${DIR_MAIN}/tools/${fname}" "${drivers_off}/drivers64UEFI/${fname//_x64}"
else
cp -f "${DIR_MAIN}/tools/${fname}" "${drivers_off}/drivers64UEFI/${fname}"
fi
else
printWarning "\ndrivers64UEFI not found, maybe that arch hasn‘t been selected, skipping..."
fi
fi
done
}
# --------------------------------------
CleanExit () {
if [[ -f /tmp/Build_Clover.tmp ]]; then rm -f /tmp/Build_Clover.tmp; fi
exit 0
}
# --------------------------------------
OsOpen () {
if [[ "$SYSNAME" == Darwin ]]; then
open "${1}" > /dev/null 2>&1
else
if which xdg-open > /dev/null; then
xdg-open "${1}" > /dev/null 2>&1
elif which gnome-open > /dev/null; then
gnome-open "${1}" > /dev/null 2>&1
fi
fi
}
# --------------------------------------
FindScriptPath () {
local s_path s_name l_path
local s_orig=$(which "${0}")
if [[ -L "$s_orig" ]]; then
[[ "$SYSNAME" == Linux ]] && l_path=$(readlink -f "$s_orig") || l_path=$(readlink "$s_orig")
s_path=$(dirname "$l_path"); s_name=$(basename "$l_path")
else
s_path=$(dirname "$s_orig"); s_name=$(basename "$s_orig")
fi
SCRIPT_ABS_PATH=$( cd "${s_path}" && pwd )
SCRIPT_ABS_LOC="${SCRIPT_ABS_PATH}"/"${s_name}"
}
# --------------------------------------
IsNumericOnly() {
[[ "${1}" =~ ^-?[0-9]+$ ]] && return 0 || return 1
}
# --------------------------------------
pressAnyKey(){
[[ "${2}" != noclear ]] && ClearScreen
printf "${1}\n"
read -rsp $‘Press any key to continue...\n‘ -n1 key
ClearScreen
}
# --------------------------------------
selfUpdate() {
printHeader "SELF UPDATE"
printf "\nA new Build_Clover.command is available,\n"
printf "do you want to overwrite the script? (Y/n): "
read answer
case $answer in
Y | y)
if [[ -f /tmp/Build_Clover.tmp ]]; then
cat /tmp/Build_Clover.tmp > "${SCRIPT_ABS_LOC}"
exec "${SCRIPT_ABS_LOC}"
else
pressAnyKey ‘Was not possible to update Build_Clover.command,‘
fi;;
esac
}
# --------------------------------------
printThickLine() {
printf "%*s\n" 80 | tr " " "="
}
# --------------------------------------
printLine() {
printf "\n%*s\n" 80 $( printf "<%*s\n" 50 | tr " " "-" )
}
# --------------------------------------
printHeader() {
printThickLine
printf "\e[1;34m${1}\e[0m"
printLine
}
# --------------------------------------
printError() {
printf "\e[1;31m${1}\e[0m"
#exit 1
}
# --------------------------------------
printWarning() {
printf "\e[1;33m${1}\e[0m"
}
# --------------------------------------
printMessage() {
printf "\e[1;32m${1}\e[0m\040"
}
# --------------------------------------
addSymlink() {
ClearScreen
if [[ ! -d "$(dirname $SYMLINKPATH)" ]]; then
printError "$(dirname $SYMLINKPATH) does not exist, cannot add a symlink..\n"
pressAnyKey ‘\n‘
build
fi
[[ "$USER" != root ]] && echo "type your password to add the symlink:"
[[ -d "${SYMLINKPATH}" ]] && sudo rm -rf "${SYMLINKPATH}" # just in case there‘s a folder with the same name
eval "sudo ln -nfs \"${SCRIPT_ABS_LOC}\" $SYMLINKPATH"
if [[ $? -ne 0 ]] ; then
printError "\no_Ops, something wrong, cannot add the symlink..\n"
pressAnyKey ‘\n‘ noclear
sudo -k && build
else
echo "now is possible to open the Terminal and type \"buildclover\""
echo "to simply run Build_Clover.command.."
pressAnyKey ‘..the script will be closed to allow you to do that!\n‘ noclear
sudo -k && CleanExit
fi
}
# --------------------------------------
initialChecks() {
if [[ "$SYSNAME" == Linux ]]; then
local depend=""
if [[ "$(uname -m)" != x86_64 ]]; then
printError "\nBuild_Clover.command is tested only on x86_64 architecture, aborting..\n"
exit 1
fi
# check if the Universally Unique ID library - headers are installed
[[ "$(apt-cache policy uuid-dev | grep ‘Installed: (none)‘)" =~ ‘Installed: (none)‘ ]] && depend+=" uuid-dev"
# check if subversion is installed
[[ ! -x $(which svn) ]] && depend+=" subversion"
# check if python is installed
[[ ! -x $(which python) ]] && depend+=" python"
# check if gcc or is installed. As a workaround for Linux Mint, it checks for g++ as well
[[ ! -x $(which gcc) || ! -x $(which g++) ]] && depend+=" build-essential"
# check whether at least one of curl or wget are installed
[[ ! -x $(which wget) && ! -x $(which curl) ]] && depend+=" wget"
# installing the dependencies
if [[ "$depend" != "" ]]; then ClearScreen; aptInstall "$depend"; fi
# set the donloader command path
if [[ -x $(which wget) ]]; then
DOWNLOADER_PATH=$(dirname $(which wget))
DOWNLOADER_CMD="wget"
elif [[ -x $(which curl) ]]; then
DOWNLOADER_PATH=$(dirname $(which curl))
DOWNLOADER_CMD="curl"
else
printError "\nNo curl nor wget are installed! Install one of them and retry..\n"; exit 1
fi
else
# /usr/bin/curl!! (philip_petev)
DOWNLOADER_PATH=/usr/bin
DOWNLOADER_CMD="curl"
fi
}
# --------------------------------------
printCloverScriptRev() {
initialChecks
ClearScreen
local LVALUE RVALUE SVERSION RSCRIPTVER RSDATA
local SNameVer="Build_Clover script ${SCRIPTVER}"
if ping -c 1 github.com >> /dev/null 2>&1; then
# Retrive and filter remote script version
downloader "$GITHUB" "/tmp" "Build_Clover.tmp"
RSCRIPTVER=$( cat /tmp/Build_Clover.tmp | grep ‘^SCRIPTVER="v‘ | tr -cd ‘.0-9‘ )
LVALUE=$( echo $SCRIPTVER | tr -cd [:digit:] )
RVALUE=$( echo $RSCRIPTVER | tr -cd [:digit:] )
printThickLine
if IsNumericOnly $RVALUE; then
# Compare local and remote script version
[[ $LVALUE -ge $RVALUE ]] && SELF_UPDATE_OPT="NO" || SELF_UPDATE_OPT="YES"
[[ $LVALUE -eq $RVALUE ]] && printf "\e[1;34m${SNameVer}\e[1;32m%*s\e[0m" $((80-${#SNameVer})) "No update available."
[[ $LVALUE -gt $RVALUE ]] && printf "\e[1;34m${SNameVer}\e[1;33m%*s\e[0m" $((80-${#SNameVer})) "Wow, are you coming from the future?"
[[ $LVALUE -lt $RVALUE ]] && printf "\e[1;34m${SNameVer}\e[1;5;33m%*s\e[0m" $((80-${#SNameVer})) "Update available (v$RSCRIPTVER)"
else
printf "${SNameVer}\e[1;31m\n%s\e[0m" "Remote version unavailable due to unknown reasons!"
fi
else
printThickLine
printf "${SNameVer}\e[1;31m\n%s\n%s\e[0m" "Remote version unavailable, because GitHub is unreachable," "check your internet connection!"
fi
printLine
}
# --------------------------------------
printRevisions() {
local Clover_Remote Clover_Local EDK2_Remote EDK2_Local
local Unknown="\e[1;31munknown"
# Checking if the local and remote revisions are empty or not
[[ -z "$REMOTE_REV" || -z "$REMOTE_EDK2_REV" ]] && PING_RESPONSE="NO" || PING_RESPONSE="YES"
[[ -z "$REMOTE_REV" ]] && Clover_Remote="$Unknown" || Clover_Remote="$REMOTE_REV"
[[ -z "$LOCAL_REV" ]] && Clover_Local="$Unknown" || Clover_Local="$LOCAL_REV"
[[ -z "$REMOTE_EDK2_REV" ]] && EDK2_Remote="$Unknown" || EDK2_Remote="$REMOTE_EDK2_REV"
[[ -z "$LOCAL_EDK2_REV" ]] && EDK2_Local="$Unknown" || EDK2_Local="$LOCAL_EDK2_REV"
# Coloring the local revisions green (if they‘re equal to the remote revisions) or yellow (if they‘re not)
[[ "${Clover_Local}" == "${Clover_Remote}" ]] && Clover_Remote="\e[1;32m${Clover_Remote}" || Clover_Remote="\e[1;33m${Clover_Remote}"
[[ "${EDK2_Local}" == "${EDK2_Remote}" ]] && EDK2_Remote="\e[1;32m${EDK2_Remote}" || EDK2_Remote="\e[1;33m${EDK2_Remote}"
# Printing the results on screen
printf "\e[1;32mCLOVER\tRemote revision: %b\t\e[1;32mLocal revision: %b\e[0m" "${Clover_Remote}" "${Clover_Local}"
printf "\n\e[1;32mEDK2\tRemote revision: %b\t\e[1;32mLocal revision: %b\e[0m\n" "${EDK2_Remote}" "${EDK2_Local}"
# Printing the error messages in case the local and remote revisions are empty
[[ "$Clover_Remote" == "$Unknown" ]] && printError "Something went wrong while getting the CLOVER remote revision,\ncheck your internet connection!\n"
[[ "$Clover_Local" == "$Unknown" ]] && printError "Something went wrong while getting the CLOVER local revision!\n"
[[ "$EDK2_Remote" == "$Unknown" ]] && printError "Something went wrong while getting the EDK2 remote revision,\ncheck your internet connection!\n"
[[ "$EDK2_Local" == "$Unknown" ]] && printError "Something went wrong while getting the EDK2 local revision!\n"
# Checking if the local EDK2 revision is the suggested one or not
echo
if [[ "${cus_edk2}" == "Y" ]]; then
printWarning "User-provided EDK2 revision: ${EDK2_REV}\n\n"
fi
if [[ "${LOCAL_EDK2_REV}" == "${EDK2_REV}" ]]; then
printMessage "The current local EDK2 revision is the suggested one (${EDK2_REV})."
else
printWarning "\e[5mThe current local EDK2 revision is not the suggested one (${EDK2_REV})!"
printWarning "\nIt‘s recommended to change it to the suggested one,"
printWarning "\nusing the \e[1;32mupdate Clover + force edk2 update\e[1;33m option!"
fi
if [[ "${useDefaults}" == "Y" ]]; then
printMessage "\nUsed settings: default"
else
printMessage "\nUsed settings: \e[1;33m${userconf}\e[0m"
fi
printLine
}
# --------------------------------------
downloader(){
#$1 link
#$2 path (where will be saved)
#$3 file name
local cmd=""
case "$DOWNLOADER_CMD" in
wget ) cmd="${DOWNLOADER_PATH}/${DOWNLOADER_CMD} -qO- ${1}";;
curl ) cmd="${DOWNLOADER_PATH}/${DOWNLOADER_CMD} -sL ${1}";;
* ) printError "\nNo curl nor wget are installed! Install one of them and retry..\n"; exit 1;;
esac
if [[ ! -z "${2}" && ! -z "${3}" && -d "${2}" ]]; then
case "$DOWNLOADER_CMD" in
wget ) cmd="${DOWNLOADER_PATH}/${DOWNLOADER_CMD} -qO ${2}/${3} ${1}";;
curl ) cmd="${DOWNLOADER_PATH}/${DOWNLOADER_CMD} -sL -o ${2}/${3} ${1}";;
esac
if [[ -d "${2}/${3}" ]]; then rm -rf "${2}/${3}"; fi
fi
eval "${cmd}"
}
# --------------------------------------
aptInstall() {
if [[ -z "${1}" ]]; then return; fi
printWarning "Build_Clover need this:\n"
printError "${1:1}\n"
printWarning "..to be installed, but was not found.\n"
printWarning "Would you allow to install it? (Y/N)\n"
read answer
case $answer in
Y | y ) if [[ "$USER" != root ]]; then echo "type your password to install:"; fi
sudo apt-get update
sudo apt-get install$1;;
*) printError "Build_Clover cannot go ahead without it/them, process aborted!\n"; exit 1;;
esac
sudo -k
}
# --------------------------------------
# Upgrage SVN working copy
svnUpgrade () {
svn info "${DIR_MAIN}/edk2/Clover" 2>&1 | grep ‘svn upgrade‘
# if the svn working directory is outdated, let the user know
if [[ $? -eq 0 ]]; then
printError "Error: You need to upgrade the working copy first.\n"
for workingCopy in `find "${DIR_MAIN}/edk2" -name "*.svn"`
do
if [[ -d "$(dirname $workingCopy)" ]]; then
printWarning "Would you like to upgrade the, $(dirname $workingCopy), working copy? (y/n)\n"
read input
case $input in
Y | y) printWarning "Upgrading $(dirname $workingCopy).\n"; svn upgrade "$(dirname $workingCopy)";;
*) printWarning "You may encounter errors!\n";;
esac
fi
done
fi
}
# --------------------------------------
# Remote and local revisions
getRev() {
if ping -c 1 svn.code.sf.net >> /dev/null 2>&1; then
REMOTE_REV=$(svn info ${CLOVER_REP} | grep ‘^Revision:‘ | tr -cd [:digit:])
REMOTE_EDK2_REV=$(svn info ${EDK2_REP} | grep ‘^Revision:‘ | tr -cd [:digit:])
else
REMOTE_REV=""
REMOTE_EDK2_REV=""
fi
if [[ -d "${DIR_MAIN}"/edk2/Clover/.svn ]]; then
svnUpgrade # upgrade the working copy to avoid errors
LOCAL_REV=$(svn info "${DIR_MAIN}"/edk2/Clover | grep ‘^Revision:‘ | tr -cd [:digit:])
else
LOCAL_REV=""
fi
if [[ -d "${DIR_MAIN}"/edk2/.svn ]]; then
LOCAL_EDK2_REV=$(svn info "${DIR_MAIN}"/edk2 | grep ‘^Revision:‘ | tr -cd [:digit:])
else
LOCAL_EDK2_REV=""
fi
}
# --------------------------------------
selectArch () {
archs=(
‘Standard x64 only‘
‘ia32 and x64 (ia32 is deprecated)‘
‘ia32 only (deprecated)‘
‘Back to Main Menu‘
‘Exit‘
)
ClearScreen
printHeader "Select the desired architecture"
if [[ -n "$1" ]]; then echo "$1"; echo; fi
local count=1
for op in "${archs[@]}"
do
case "${op}" in
‘Standard x64 only‘ ) printf "\e[1;36m\t ${count}) ${op}\e[0m\n";;
* ) printf "\t $count) ${op}\n";;
esac
((count+=1))
done
printf ‘? ‘ && read opt
case $opt in
1 ) ARCH="X64";;
2 ) ARCH="IA32_X64";;
3 ) ARCH="IA32";;
4 ) ClearScreen && BUILDER=$USER && build;;
5 ) CleanExit;;
* ) selectArch "invalid choice!";;
esac
if [[ "$SYSNAME" == Darwin && "$LOCAL_REV" -ge "4073" ]]; then slimPKG; fi
}
# --------------------------------------
slimPKG () {
archs=(
‘Standard‘
‘slim pkg that skip themes and CloverThemeManager.app‘
‘slim pkg that skip themes and CloverThemeManager.app, updater and PrefPanel‘
‘slim pkg UEFI only, without RC Scripts, themes & CTM, updater and PrefPanel‘
‘Back to Select architecture menu‘
‘Exit‘
)
ClearScreen
printHeader "Select the desired pkg type"
if [[ -n "$1" ]]; then echo "$1" && echo; fi
local count=1
for op in "${archs[@]}"
do
case "${op}" in
‘Standard‘ ) printf "\e[1;36m\t ${count}) ${op}\e[0m\n";;
* ) printf "\t $count) ${op}\n";;
esac
((count+=1))
done
printf ‘? ‘ && read opt
case $opt in
1 ) MAKEPKG_CMD="make pkg";;
2 ) MAKEPKG_CMD="make slimpkg1";;
3 ) MAKEPKG_CMD="make slimpkg2";;
4 ) MAKEPKG_CMD="make slimpkg3";;
5 ) ClearScreen && selectArch;;
6 ) CleanExit;;
* ) slimPKG "invalid choice!";;
esac
}
# --------------------------------------
cleanCloverV2 () {
c2paths=(
"Bootloaders/ia32/boot3"
"Bootloaders/x64/boot6"
"Bootloaders/x64/boot7"
"EFI/BOOT/BOOTIA32.efi"
"EFI/BOOT/BOOTX64.efi"
"EFI/CLOVER/CLOVERIA32.efi"
"EFI/CLOVER/CLOVERX64.efi"
"EFI/CLOVER/drivers32"
"EFI/CLOVER/drivers32UEFI"
"EFI/CLOVER/drivers64"
"EFI/CLOVER/drivers64UEFI"
"drivers-Off/drivers32"
"drivers-Off/drivers32UEFI"
"drivers-Off/drivers64"
"drivers-Off/drivers64UEFI"
)
if [[ -d "${CLOVERV2_PATH}" ]]; then
for i in "${c2paths[@]}"
do
rm -rf "${CLOVERV2_PATH}/${i}"
done
fi
}
# --------------------------------------
# Function: to manage PATH
pathmunge () {
if [[ ! $PATH =~ (^|:)$1(:|$) ]]; then
if [[ "${2:-}" = "after" ]]; then
export PATH=$PATH:$1
else
export PATH=$1:$PATH
fi
fi
}
# --------------------------------------
checkXcode () {
if [[ ! -x /usr/bin/gcc ]]; then printError "Xcode clt not found, exiting!\n"; exit 1; fi
if [[ ! -x /usr/bin/xcodebuild ]]; then printError "xcodebuild not found, exiting!\n"; exit 1; fi
# Autodetect the Xcode version if no specific version is set (XCODE) and disable LTO if Xcode is version 7.2.x or earlier
if [[ "$XCODE" == "" ]]; then
local xcversion=$(/usr/bin/xcodebuild -version | grep ‘Xcode‘ | awk ‘{print $NF}‘)
case "$xcversion" in
[1-6]* | 7 | 7.[0-2]*) XCODE="XCODE5"; LTO_FLAG="--no-lto";;
7.[34]*) XCODE="XCODE5";;
8*) XCODE="XCODE8";;
9*) XCODE="XCODE8";;
*) printError "Unknown Xcode version format, exiting!\n"; exit 1;;
esac
fi
}
# --------------------------------------
doSomething() {
# $1 = option
# $2 = cmd
# $3 = first argument
# $4 = second argument
# $5 = ... and so on
local cmd=""
case "$1" in
--run-script )
if [[ -x "${2}" ]]; then
# rebuild the cmd + all args
cmd=$(echo "[email protected]" | sed -e ‘s:--run-script ::g‘ | sed -e ‘s/[[:space:]]*$//‘)
else
echo
echo "doSomething: \"--run-script\" option require you to add a script somewhere.."
echo
fi;;
* ) printError "doSomething: invalid \"--run-script\" long option not specified\n"; exit 1;;
esac
eval "${cmd}"
if [[ $? -ne 0 ]] ; then printError "\no_Ops, $2 exited with error(s), aborting..\n"; exit 1; fi
}
# --------------------------------------
exportPaths() {
# STLVNUB
if [[ "$SYSNAME" == Linux ]]; then
export TOOLCHAIN_DIR="/usr"
else
export TOOLCHAIN_DIR="${DIR_MAIN}"/opt/local
fi
export PREFIX="$TOOLCHAIN_DIR"
if [[ -f "/opt/local/bin/nasm" ]]; then
export NASM_PREFIX="/opt/local/bin/"
elif [[ -f "${TOOLCHAIN_DIR}/bin/nasm" ]]; then
export NASM_PREFIX="${TOOLCHAIN_DIR}/bin/"
else
# default for this script!
export NASM_PREFIX="${TOOLCHAIN_DIR}/bin/"
fi
export DIR_TOOLS=${DIR_TOOLS:-$DIR_MAIN/tools}
export DIR_DOWNLOADS=${DIR_DOWNLOADS:-$DIR_TOOLS/download}
export DIR_LOGS=${DIR_LOGS:-$DIR_TOOLS/logs}
}
# --------------------------------------
exportXcodePaths() {
# Add XCode bin directory for the command line tools to the PATH
pathmunge "$(xcode-select --print-path)"/usr/bin
# Add toolchain bin directory to the PATH
pathmunge "$TOOLCHAIN_DIR"/bin
}
# --------------------------------------
svnWithErrorCheck() {
# $1 = svn command to be execute
# $2 = containing folder of our /.svn we are attempting to work on
# $3 = reserved argument ("once") indicating we are calling ‘svn resolve‘
# $4 = reserved argument equal to initial $1 command string
if [[ -z "${1}" ]]; then return; fi
local cmd="${1}"
if [[ -n "${4}" ]]; then cmd="${4}"; fi
echo "" > "${SVN_STDERR_LOG}"
if [[ ! -x $(which tee) ]]; then
eval "${cmd}" 2> "${SVN_STDERR_LOG}"
else
eval "${cmd}" 2>&1 | tee -a "${SVN_STDERR_LOG}"
fi
local errors=(
"svn: E"
"Unable to connect"
"Unknown hostname"
"timeout"
"time out"
)
local ErrCount=0
# try to resolve conflicts if any
if [[ -n "${2}" && "${3}" != once ]]; then
if grep -q "Tree conflict can only be resolved to ‘working‘ state" "${SVN_STDERR_LOG}" || grep -q "Node remains in conflict" "${SVN_STDERR_LOG}"; then
printWarning "Calling svn resolve..\n"
svnWithErrorCheck "svn resolve ${2}" "${2}" once "${1}"
fi
fi
for err in "${errors[@]}"
do
if grep -q "${err}" "${SVN_STDERR_LOG}"; then ((ErrCount+=1)); break; fi
done
if [[ "${ErrCount}" -ge "1" ]];then
echo
printError "An error was encountered syncing the repository:\n"
echo "------------------------------"
echo "$( cat ${SVN_STDERR_LOG} )"
echo
echo "------------------------------"
printError "Can be temporarily, retry later or seek for help.\n"
exit 1
fi
}
# --------------------------------------
IsLinkOnline() {
if [[ $FAST_UPDATE != NO ]]; then return 1; fi
if [[ -z "${1}" ]]; then printError "IsLinkOnline() require a link as argument!"; exit 1; fi
((TIMES+=1))
printf "\e[1;35mchecking..\e[0m"
svn info "${1}" > /dev/null
if [[ $? -eq 0 ]]; then
printf "\e[1;32mavailable, continuing..\e[0m\n"
TIMES=0
return 1 # Success!
else
if [[ $TIMES -ge 5 ]]; then
printError "\nError: unable to access ${1} after $TIMES attempts.";
printError "\nBuild_Clover go to fail voluntarily to avoid problems,";
printError "\ncheck your internet connection or retry later!\n\n";
return 0
else
# retry..
IsLinkOnline "${1}"
fi
fi
}
# --------------------------------------
IsPathWritable() {
local result=1
# file/folder exists?
if [[ ! -e "${1}" ]]; then printWarning "${1} does not exist!\n"; return $result; fi
if [[ -w "${1}" ]]; then
printMessage "${1} is writable!\n"
result=0
else
printWarning "${1} is not writable!\n"
fi
return $result
}
# --------------------------------------
edk2() {
local revision="-r $EDK2_REV"
local updatelink="https://sourceforge.net/p/cloverefiboot/code/HEAD/tree/update.sh?format=raw"
local edk2ArrayOnline=(
$( downloader "$updatelink" | grep ‘cd ..‘ | sed -e ‘s/^cd ..\///‘ | sed -e ‘s/\/$//‘ | sed -e ‘/Clover/d‘ | sed -e ‘s:BaseTools/Conf:BaseTools:g‘ )
)
# use only if populated, otherwise use the static "edk2array"
if [[ "${#edk2ArrayOnline[@]}" -ge "1" ]]; then unset -v edk2array; edk2array=( "${edk2ArrayOnline[@]}" ); fi
if [[ "$ForceEDK2Update" -ne "1979" ]]; then
if [[ ! -d "${DIR_MAIN}/edk2/.svn" ]]; then ForceEDK2Update=1; fi
for d in "${edk2array[@]}"
do
if [[ "$d" != Source && "$d" != Scripts ]]; then
if [[ ! -d "${DIR_MAIN}/edk2/${d}/.svn" ]]; then ForceEDK2Update=1; fi
fi
done
fi
if [[ "$ForceEDK2Update" -eq "0" ]]; then
if [[ "${LOCAL_EDK2_REV}" == "${EDK2_REV}" ]]; then
printWarning "edk2 appear to be up to date, skipping ...\n"
else
printWarning "edk2 is not up to date, but no forced edk2 update is selected, skipping ...\n"
fi
else
echo
if [[ ! -d "${DIR_MAIN}/edk2" ]]; then
printHeader ‘Downloading edk2‘
mkdir -p "${DIR_MAIN}"/edk2
else
if [[ "$ForceEDK2Update" -eq "1979" ]]; then
printHeader ‘Updating edk2 (forced)‘
else
printHeader ‘Updating edk2‘
fi
fi
TIMES=0
cd "${DIR_MAIN}"/edk2
IsLinkOnline $EDK2_REP
# I want ".svn", also empty at the specified revision! .. so I can update!
svnWithErrorCheck "svn --depth empty co $revision --non-interactive --trust-server-cert $EDK2_REP ."
printf "\n\e[1;34medksetup.sh:\e[0m\n"
IsLinkOnline $EDK2_REP/edksetup.sh
svnWithErrorCheck "svn update --accept tf --non-interactive --trust-server-cert $revision edksetup.sh" "$(pwd)"
for d in "${edk2array[@]}"
do
if [[ "$d" != "Source" && "$d" != "Scripts" ]]; then
printf "\n\e[1;34m${d}:\e[0m\n"
TIMES=0
IsLinkOnline "$EDK2_REP/${d}"
cd "${DIR_MAIN}"/edk2
if [[ -d "${DIR_MAIN}/edk2/${d}" ]] ; then
if [[ -d "${DIR_MAIN}/edk2/${d}/.svn" ]] ; then
cd "${DIR_MAIN}/edk2/${d}"
svnWithErrorCheck "svn update --accept tf --non-interactive --trust-server-cert $revision" "$(pwd)"
if [[ "$d" == "BaseTools" ]]; then ForceEDK2Update=1979; fi
else
printWarning ".svn missing, the ${d} repo may be corrupted, re-downloading...\n"
cd "${DIR_MAIN}/edk2/${d}"
rm -rf ./* > /dev/null 2>&1
svnWithErrorCheck "svn co $revision --non-interactive --trust-server-cert $EDK2_REP/${d} ."
fi
else
cd "${DIR_MAIN}"/edk2
svnWithErrorCheck "svn co $revision --non-interactive --trust-server-cert $EDK2_REP/${d}"
fi
fi
done
if [[ "$ForceEDK2Update" -eq "1979" ]]; then
printHeader "cleaning BaseTools and Clover / Clover Package"
echo
if [[ -d "${DIR_MAIN}/edk2/BaseTools" ]]; then cd "${DIR_MAIN}/edk2/BaseTools"; make clean; fi
if [[ -d "${DIR_MAIN}/edk2/Clover" ]]; then cd "${DIR_MAIN}/edk2/Clover"; ./ebuild.sh clean; fi
if [[ -d "${DIR_MAIN}/edk2/Clover/CloverPackage" ]]; then cd "${DIR_MAIN}/edk2/Clover/CloverPackage"; make clean; fi
FORCEREBUILD="-fr"
fi
ForceEDK2Update=0
fi
}
# --------------------------------------
clover() {
local cmd=""
# check if SUGGESTED_CLOVER_REV is set
if [[ -z "$SUGGESTED_CLOVER_REV" ]]; then
echo
if [[ ! -d "${DIR_MAIN}/edk2/Clover" ]]; then
printHeader ‘Downloading Clover, using the latest revision‘
if IsNumericOnly "${REMOTE_REV}"; then
mkdir -p "${DIR_MAIN}"/edk2/Clover
cmd="svn co -r $REMOTE_REV --non-interactive --trust-server-cert ${CLOVER_REP} ."
else
printError "Unable to get latest Clover revision, check your internet connection or try later.\n"
exit 1
fi
else
if [[ "${LOCAL_REV}" == "" ]]; then
printHeader ‘Clover local repo not found or damaged, downloading the latest revision‘
rm -rf "${DIR_MAIN}"/edk2/Clover/* > /dev/null 2>&1
cmd="svn co -r $REMOTE_REV --non-interactive --trust-server-cert ${CLOVER_REP} ."
else
printHeader ‘Updating Clover, using the latest revision‘
cmd="svn up --accept tf --non-interactive --trust-server-cert"
fi
fi
else
if [[ ! -d "${DIR_MAIN}/edk2/Clover" ]] ; then
printHeader "Downloading Clover, using the specific revision r${SUGGESTED_CLOVER_REV}"
mkdir -p "${DIR_MAIN}"/edk2/Clover
cmd="svn co -r $SUGGESTED_CLOVER_REV --non-interactive --trust-server-cert ${CLOVER_REP} ."
else
if [[ "${LOCAL_REV}" == "" ]]; then
printHeader "Clover local repo not found or damaged, downloading the specific revision r${SUGGESTED_CLOVER_REV}"
rm -rf "${DIR_MAIN}"/edk2/Clover/* > /dev/null 2>&1
cmd="svn co -r $SUGGESTED_CLOVER_REV --non-interactive --trust-server-cert ${CLOVER_REP} ."
else
printHeader "Updating Clover, using the specific revision r${SUGGESTED_CLOVER_REV}"
cmd="svn up --accept tf --non-interactive --trust-server-cert -r $SUGGESTED_CLOVER_REV"
fi
fi
fi
TIMES=0
IsLinkOnline ${CLOVER_REP}
cd "${DIR_MAIN}"/edk2/Clover
svnWithErrorCheck "$cmd" "$(pwd)"
printHeader ‘Apply Edk2 patches‘
cp -R "${DIR_MAIN}"/edk2/Clover/Patches_for_EDK2/* "${DIR_MAIN}"/edk2/
# in Lion cp cause error with subversion (comment this line and enable next)
# rsync -rv --exclude=.svn "${DIR_MAIN}"/edk2/Clover/Patches_for_EDK2/ "${DIR_MAIN}"/edk2
}
# --------------------------------------
needGETTEXT() {
local gettextPath=""
local gettextArray=( $(which -a gettext) )
local needInstall=1
if [[ ${#gettextArray[@]} -ge "1" ]]; then
for i in "${gettextArray[@]}"
do
echo "found gettext at $(dirname ${i})"
done
else
needInstall=0
echo "gettext not found.."
fi
return $needInstall
}
# --------------------------------------
isNASMGood() {
# nasm should be greater or equal to 2.12.02 to be good building Clover.
# There was a bad macho relocation in outmacho.c, fixed by Zenith432
# and accepted by nasm devel during 2.12.rcxx (release candidate)
result=1
local nasmver=$( "${1}" -v | grep ‘NASM version‘ | awk ‘{print $3}‘ )
case "$nasmver" in
2.12.0[2-9]* | 2.12.[1-9]* | 2.1[3-9]* | 2.[2-9]* | [3-9]* | [1-9][1-9]* ) result=0;;
* ) printWarning "Unknown or unsupported NASM version found at:\n${1}\nDownloading the preferred one (${NASM_PREFERRED})...\n\n";;
esac
return $result
}
# --------------------------------------
ebuildBorg () {
if [[ "$MOD_PKG_FLAG" != YES ]]; then return; fi
local NR=0
if [[ "$SYSNAME" == Darwin ]]; then printHeader ‘Modding package resources‘; fi
case "$ARCH" in
IA32_X64 | X64 )
local oldTitle=‘cloverEFI.64.blockio_title‘
local oldDesc=‘cloverEFI.64.blockio_description‘
local newTitle=‘"cloverEFI.64.blockio_title" = "Custom CloverEFI 64-bits (boot7)";‘
local newDesc=$(echo "\"cloverEFI.64.blockio_description\" = \"Built using Build_Clover.command with: ${DEFINED_MACRO}\";")
if grep -q "cloverEFIFile=boot\$((6 + USE_BIOS_BLOCKIO))" "${ebuild}"; then
cat "${ebuild}" | sed -e ‘s/cloverEFIFile=boot\$((6 + USE_BIOS_BLOCKIO))/cloverEFIFile=boot7/g‘ > "${ebuildB}"
chmod +x "${ebuildB}"
else
printError "Error: ebuild.sh changed, this script need to be updated!\n"
exit 1
fi;;
IA32 )
local oldTitle=‘cloverEFI.32_title‘
local oldDesc=‘cloverEFI.32_description‘
local newTitle=‘"cloverEFI.32_title" = "Custom CloverEFI 32-bits (boot3)";‘
local newDesc=$(echo "\"cloverEFI.32_description\" = \"Built using Build_Clover.command with: ${DEFINED_MACRO}\";");;
esac
if [[ "$SYSNAME" != Darwin ]]; then return; fi
# modding po files
cp -R "${LOCALIZABLE_FILE}" /tmp/
set +e # handle the error by ourself
err=0
if [[ -f /tmp/Localizable.strings ]]; then
NR=$(grep -n "${oldTitle}" /tmp/Localizable.strings | grep -Eo ‘^[^:]+‘)
sed -i "" "${NR}s/.*/${newTitle}/" /tmp/Localizable.strings
# waiting file reappear
until [ -f /tmp/Localizable.strings ]; do sleep 0.3; done
NR=$(grep -n "${oldDesc}" /tmp/Localizable.strings | grep -Eo ‘^[^:]+‘)
sed -i "" "${NR}s/.*/${newDesc}/" /tmp/Localizable.strings
# waiting file reappear
until [ -f /tmp/Localizable.strings ]; do sleep 0.3; done
if (! grep -q "${newTitle}" /tmp/Localizable.strings); then
printError "Error: in /tmp/Localizable.strings, no changes applied..\n"
((err+=1))
fi
if (! grep -qe "${DEFINED_MACRO}" /tmp/Localizable.strings); then
printError "Error: in /tmp/Localizable.strings, no changes applied..\n"
((err+=1))
fi
else
printError "Error: Localizable.strings not found\n"
((err+=1))
fi
if [[ "$err" -eq 0 ]]; then
mv -f "${LOCALIZABLE_FILE}" "${LOCALIZABLE_FILE}.back"
mv /tmp/Localizable.strings "${LOCALIZABLE_FILE}"
cp -R "${PKG_PATH}/po" "${PKG_PATH}/po_back"
echo "success!"
echo $ThickLine
fi
set -e
}
# --------------------------------------
restoreClover () {
if [[ -f "${LOCALIZABLE_FILE}.back" ]]; then
mv -f "${LOCALIZABLE_FILE}.back" "${LOCALIZABLE_FILE}"
fi
if [[ -f "${CLOVERV2_PATH}/Bootloaders/x64/boot7-MCP79.back" ]]; then
mv -f "${CLOVERV2_PATH}/Bootloaders/x64/boot7-MCP79.back" "${CLOVERV2_PATH}/Bootloaders/x64/boot7-MCP79"
fi
if [[ -d "${PKG_PATH}/po_back" ]]; then
cp -R "${PKG_PATH}/po_back" "${PKG_PATH}/po"
rm -rf "${PKG_PATH}/po_back"
fi
if [[ -f "${ebuildB}" ]]; then
rm -f "${ebuildB}"
fi
}
# --------------------------------------
buildEssentials() {
echo
# ensure custom paths exists
mkdir -p "${TOOLCHAIN_DIR}"/bin
mkdir -p "${DIR_TOOLS}"
mkdir -p "${DIR_DOWNLOADS}"
mkdir -p "${DIR_LOGS}"
# no mach-o in linux,
printHeader "nasm check:"
if [[ ! -x "${NASM_PREFIX}"nasm ]] || ! isNASMGood "${NASM_PREFIX}"nasm; then
FORCEREBUILD="-fr" # the path to nasm can now be different in generated make files: it is safe to autogen it again!
printWarning "NASM not found or not the proper version, installing the preferred one..."
if [[ -d "${DIR_DOWNLOADS}"/source.download ]]; then rm -rf "${DIR_DOWNLOADS}"/source.download/*; else mkdir -p "${DIR_DOWNLOADS}"/source.download; fi
# NASM_PREFIX (the folder) can be writable or not, but also NASM_PREFIX can be writable and an old nasm inside it not writable because owned by root!
cd "${DIR_DOWNLOADS}"/source.download
case "$SYSNAME" in
Linux )
printMessage "\nDownloading the preferred version (${NASM_PREFERRED})..."
downloader "http://www.nasm.us/pub/nasm/releasebuilds/${NASM_PREFERRED}/nasm-${NASM_PREFERRED}.tar.gz" "${DIR_DOWNLOADS}/source.download" "${NASM_PREFERRED}.tar.gz"
tar -zxf "${NASM_PREFERRED}".tar.gz
cd "${DIR_DOWNLOADS}/source.download/nasm-${NASM_PREFERRED}"
printMessage "\n[ NASM ] configure..."
./configure --prefix="${PREFIX}" 1> /dev/null 2> "${DIR_LOGS}"/nasm-"${NASM_PREFERRED}".config.log.txt
printMessage "\n[ NASM ] make..."
make CC=gcc 1> /dev/null 2> "${DIR_LOGS}"/nasm-"${NASM_PREFERRED}".make.log.txt
printMessage "\n[ NASM ] make install..."
if ! IsPathWritable "${NASM_PREFIX}"; then
echo
echo "installing nasm to ${NASM_PREFIX} require sudo because"
echo "is not writable by $BUILDER:"
sudo make install 1> /dev/null 2> "${DIR_LOGS}"/nasm-"${NASM_PREFERRED}".install.log.txt
sudo -k
else
make install 1> /dev/null 2> "${DIR_LOGS}"/nasm-"${NASM_PREFERRED}".install.log.txt
fi;;
Darwin )
printMessage "\nDownloading the preferred version for macOS (${NASM_PREFERRED})..."
downloader "http://www.nasm.us/pub/nasm/releasebuilds/${NASM_PREFERRED}/macosx/nasm-${NASM_PREFERRED}-macosx.zip" "${DIR_DOWNLOADS}/source.download" "${NASM_PREFERRED}.zip"
printMessage "\nInstalling..."
unzip "${NASM_PREFERRED}".zip 1> /dev/null
if ! IsPathWritable "${NASM_PREFIX}"; then
echo
echo "installing nasm to ${NASM_PREFIX} require sudo because"
echo "is not writable by $BUILDER:"
sudo cp -R "nasm-${NASM_PREFERRED}"/nasm "${NASM_PREFIX}" && sudo -k # exiting sudo immediately!
else
cp -R "nasm-${NASM_PREFERRED}"/nasm "${NASM_PREFIX}"
fi;;
esac
# check the installation made:
if [[ -x "${NASM_PREFIX}"nasm ]] && isNASMGood "${NASM_PREFIX}"nasm; then
printMessage "\nDone\n"; echo
else
printMessage "\nNASM installation error, check the log!\n"; exit 1
fi
else
echo "$(${NASM_PREFIX}nasm -v)"
fi
# ...gettext does nothing in Linux because we cannot compile the .pkg
if [[ "$SYSNAME" == Darwin ]]; then
printHeader "gettext check:"
if needGETTEXT && [[ ! -x "${TOOLCHAIN_DIR}"/bin/gettext ]]; then
# buildgettext.sh is buggie:
# suppose during the download a problem occour you can have an incomplete "gettext-latest.tar.gz" from a previous execution,
# but buildgettext.sh think that is already downloaded and will try to decompress this incomplete archive, always failing!
# That‘s why we remove the archive!
if [[ -f "${DIR_DOWNLOADS}"/gettext-latest.tar.gz ]]; then rm -f "${DIR_DOWNLOADS}"/gettext-latest.tar.gz; fi
"${DIR_MAIN}"/edk2/Clover/buildgettext.sh
fi
fi
rm -rf "${DIR_DOWNLOADS}"/source.download
}
# --------------------------------------
showMacros() {
ClearScreen
CUSTOM_BUILD="YES"
case "$ARCH" in
IA32_X64 ) printHeader "BUILD boot3 and boot7 with additional macros";;
X64 ) printHeader "BUILD boot7 with additional macros";;
IA32 ) printHeader "BUILD boot3 with additional macros";;
esac
local count=1;
for macro in ${macros[@]}
do
printf "\t $count) ${macro}\n"
((count+=1))
done
echo $1
printf ‘actual macros defined: ‘
if [[ ( "${#DEFINED_MACRO} " < 1 ) ]] ; then
printf "\e[1;30mno one\e[0m\n"
else
printf "\e[1;36m\n${DEFINED_MACRO}\e[0m\n"
fi
echo
if [[ "${#macros[@]}" -gt "0" ]]; then
echo "enter you choice or press \"b\" to build:"
printf ‘? ‘ && read choice
if [[ "${choice}" == "b" || "${choice}" == "B" ]]; then
echo "going to build as requested.."
elif [[ ${choice} =~ ^[0-9]+$ ]]; then
if [[ "$choice" -gt "0" && "$choice" -le ${#macros[@]} ]]; then
local chosed="${macros[choice -1]}"
DEFINED_MACRO=$(echo "$DEFINED_MACRO -D ${chosed}" | sed -e ‘s/^[ \t]*//‘)
macros=(${macros[@]/${macros[choice -1]}/})
showMacros "${chosed} added!"
else
showMacros "invalid choice!"
fi
else
showMacros "invalid choice!"
fi
fi
}
# --------------------------------------
backupBoot7MCP79() {
if [[ -f "${CLOVERV2_PATH}/Bootloaders/x64/boot7-MCP79" ]]; then
mv -f "${CLOVERV2_PATH}/Bootloaders/x64/boot7-MCP79" "${CLOVERV2_PATH}/Bootloaders/x64/boot7-MCP79.back"
fi
}
# --------------------------------------
build() {
if [[ -d "${DIR_MAIN}/edk2/Clover/.svn" ]] ; then
echo ‘Please enter your choice: ‘
local options=()
if [[ ! -f "$SYMLINKPATH" ]]; then
options+=("add \"buildclover\" symlink to $(dirname $SYMLINKPATH)") # add the option to link the script
else
# such file exists, but is it really symlink
if [[ -L "$SYMLINKPATH" ]]; then
[[ "$SYSNAME" == Linux ]] && symPath="$(readlink -f ${SYMLINKPATH})" || symPath="$(readlink ${SYMLINKPATH})"
# is that symlink pointing to the currently running script
[[ "$symPath" != "$SCRIPT_ABS_LOC" ]] && options+=("update \"buildclover\" symlink")
else
# not a symlink
options+=("restore \"buildclover\" symlink")
fi
fi
if [[ "$SELF_UPDATE_OPT" == YES ]]; then options+=("update Build_Clover.command"); fi
if [[ "$PING_RESPONSE" == YES && "$BUILDER" != ‘slice‘ ]]; then
options+=("update Clover only (no building)")
options+=("update Clover + force edk2 update (no building)")
fi
if [[ "$BUILDER" == ‘slice‘ ]]; then
printf " \e[1;97;104m EDK2 revision used r$EDK2_REV latest avaiable is r$REMOTE_EDK2_REV \e[0m\n"
set +e
options+=("build with ./ebuild.sh -nb")
options+=("build with ./ebuild.sh --module=rEFIt_UEFI/refit.inf")
options+=("build binaries w/o -fr (boot6 and 7)")
options+=("build binaries with -fr (boot6 and 7)")
options+=("build boot6/7 with -fr --std-ebda")
if [[ "$SYSNAME" == Darwin ]]; then
options+=("build pkg")
options+=("build iso")
options+=("build pkg+iso")
options+=("build all for Release")
fi
options+=("Back to Main Menu")
options+=("Exit")
else
options+=("run my script on the source")
options+=("build existing revision (no update, for testing only)")
options+=("build existing revision for release (no update, standard build)")
options+=("build existing revision with custom macros enabled")
options+=("enter Developers mode (only for devs)")
options+=("edit the configuration file")
options+=("Exit")
fi
local count=1
for opt in "${options[@]}"
do
case $opt in
"update Build_Clover.command" | "add \"buildclover\" symlink to $(dirname $SYMLINKPATH)" | "restore \"buildclover\" symlink" | "update \"buildclover\" symlink" ) printf "\e[1;31m ${count}) ${opt}\e[0m\n";;
"build existing revision for release (no update, standard build)" | "update Clover + force edk2 update (no building)" | "build all for Release" | "build binaries with FORCEREBUILD (boot3, 6 and 7 also)" ) printf "\e[1;36m ${count}) ${opt}\e[0m\n";;
* ) printf " ${count}) ${opt}\n";;
esac
((count+=1))
done
local choice=""
local lastIndex="${#options[@]}"
((lastIndex-=1))
printf ‘? ‘ && read opt
if IsNumericOnly $opt; then
((opt-=1))
if [[ "$opt" -ge "0" && "$opt" -le "$lastIndex" ]]; then choice="$(echo ${options[$opt]})"; fi
fi
case $choice in
"add \"buildclover\" symlink to $(dirname $SYMLINKPATH)" | "restore \"buildclover\" symlink" | "update \"buildclover\" symlink" ) addSymlink;;
"update Build_Clover.command" ) selfUpdate; build;;
"enter Developers mode (only for devs)" )
ClearScreen
if [[ -d "${DIR_MAIN}/edk2/Clover" ]] ; then
set +e
BUILDER="slice"
else
BUILDER=$USER
echo "yep... you are a Dev, but at least download Clover firstly :-)"
fi
build;;
"update Clover only (no building)" )
UPDATE_FLAG="YES"
BUILD_FLAG="NO"
ForceEDK2Update=0;;
"update Clover + force edk2 update (no building)" )
UPDATE_FLAG="YES"
BUILD_FLAG="NO"
ForceEDK2Update=1979;; # 1979 has a special meaning ...i.e force clean BaseTools
"build existing revision (no update, for testing only)" )
UPDATE_FLAG="NO"
BUILD_FLAG="YES"
selectArch;;
"build with ./ebuild.sh -nb" )
printHeader ‘ebuild.sh -nb‘
cd "${DIR_MAIN}"/edk2/Clover
START_BUILD=$(date)
./ebuild.sh -nb;;
"build with ./ebuild.sh --module=rEFIt_UEFI/refit.inf" )
cd "${DIR_MAIN}"/edk2/Clover
printHeader ‘ebuild.sh --module=rEFIt_UEFI/refit.inf‘
START_BUILD=$(date)
./ebuild.sh --module=rEFIt_UEFI/refit.inf
echo && printf "build started at:\n${START_BUILD}\nfinished at\n$(date)\n\nDone!\n";;
"build binaries w/o -fr (boot6 and 7)" )
cd "${DIR_MAIN}"/edk2/Clover
START_BUILD=$(date)
printHeader ‘boot6‘
./ebuild.sh -x64 -D NO_GRUB_DRIVERS_EMBEDDED -t $BUILDTOOL
printHeader ‘boot7‘
./ebuild.sh -mc --no-usb -D NO_GRUB_DRIVERS_EMBEDDED -t $BUILDTOOL
echo && printf "build started at:\n${START_BUILD}\nfinished at\n$(date)\n\nDone!\n";;
"build binaries with -fr (boot6 and 7)" )
cd "${DIR_MAIN}"/edk2/Clover
START_BUILD=$(date)
printHeader ‘boot6‘
./ebuild.sh -fr -x64 -D NO_GRUB_DRIVERS_EMBEDDED -t $BUILDTOOL
printHeader ‘boot7‘
./ebuild.sh -fr -mc --no-usb -D NO_GRUB_DRIVERS_EMBEDDED -t $BUILDTOOL
echo && printf "build started at:\n${START_BUILD}\nfinished at\n$(date)\n\nDone!\n";;
"build boot6/7 with -fr --std-ebda" )
cd "${DIR_MAIN}"/edk2/Clover
START_BUILD=$(date)
printHeader ‘boot6‘
./ebuild.sh -fr -x64 --std-ebda -D NO_GRUB_DRIVERS_EMBEDDED -t $BUILDTOOL
printHeader ‘boot7‘
./ebuild.sh -fr -mc --std-ebda --no-usb -D NO_GRUB_DRIVERS_EMBEDDED -t $BUILDTOOL
echo && printf "build started at:\n${START_BUILD}\nfinished at\n$(date)\n\nDone!\n";;
"build pkg" )
cd "${DIR_MAIN}"/edk2/Clover/CloverPackage
START_BUILD=$(date)
printHeader ‘make pkg‘
make pkg
echo && printf "build started at:\n${START_BUILD}\nfinished at\n$(date)\n\nDone!\n";;
"build iso" )
cd "${DIR_MAIN}"/edk2/Clover/CloverPackage
printHeader ‘make iso‘
make iso
echo && printf "build started at:\n${START_BUILD}\nfinished at\n$(date)\n\nDone!\n";;
"build pkg+iso" )
cd "${DIR_MAIN}"/edk2/Clover/CloverPackage
START_BUILD=$(date)
printHeader ‘make pkg + make iso‘
make pkg
make iso
echo && printf "build started at:\n${START_BUILD}\nfinished at\n$(date)\n\nDone!\n";;
"build all for Release" )
cd "${DIR_MAIN}"/edk2/Clover
START_BUILD=$(date)
printHeader ‘boot6‘
./ebuild.sh -fr -x64 -D NO_GRUB_DRIVERS_EMBEDDED -t $BUILDTOOL
printHeader ‘boot7‘
./ebuild.sh -fr -mc --no-usb -D NO_GRUB_DRIVERS_EMBEDDED -t $BUILDTOOL
cd "${DIR_MAIN}"/edk2/Clover/CloverPackage
make clean
printHeader ‘make pkg‘
make pkg
printHeader ‘make iso‘
make iso
echo && printf "build started at:\n${START_BUILD}\nfinished at\n$(date)\n\nDone!\n";;
"build existing revision for release (no update, standard build)" )
FORCEREBUILD="-fr"
UPDATE_FLAG="NO"
BUILD_FLAG="YES"
selectArch;;
"build existing revision with custom macros enabled" )
DEFINED_MACRO=""
UPDATE_FLAG="NO"
BUILD_FLAG="YES"
selectArch
showMacros "";;
"run my script on the source" )
eval "${MY_SCRIPT}" || printHeader "You should export MY_SCRIPT with the path to your script.." && CleanExit;;
"Back to Main Menu" ) ClearScreen && BUILDER=$USER && build;;
"edit the configuration file" ) OsOpen "${userconf}"; CleanExit;;
"Exit" ) CleanExit;;
* ) ClearScreen && echo "invalid option!!" && build;;
esac
fi
if [[ "$BUILDER" == ‘slice‘ ]]; then ClearScreen && build; fi
# show info about the running OS and its gcc
case "$SYSNAME" in
Darwin ) printHeader "Running from: macOS $(sw_vers -productVersion)\n$(/usr/bin/xcodebuild -version)";;
Linux ) if [[ -x "/usr/bin/lsb_release" ]]; then
printHeader "Running from: $(lsb_release -sir | sed -e ‘:a;N;$!ba;s/\n/ /g‘)"
else
printHeader "Running from: Linux"
fi;;
* ) printHeader "Running from: Unknown OS";;
esac
printHeader "Compiler settings"
if [[ "${Build_Tool}" == "GNU" ]]; then
if [[ -x "${DIR_MAIN}/opt/local/bin/gcc" ]]; then
printf "\e[1;34m%s\e[0m" "$(${DIR_MAIN}/opt/local/bin/gcc -v 2>&1)"
elif [[ -x "${DIR_MAIN}/opt/local/cross/bin/x86_64-clover-linux-gnu-gcc" ]]; then
printf "\e[1;34m%s\e[0m" "$(${DIR_MAIN}/opt/local/cross/bin/x86_64-clover-linux-gnu-gcc -v 2>&1)"
else
printWarning "GNU toolchain not found or incomplete, installing the missing parts now..."
fi
else
printf "\e[1;34m%s\e[0m" "$(gcc -v 2>&1)"
fi
printLine
if [[ "$BUILDER" != ‘slice‘ ]]; then restoreClover; fi
if [[ "$UPDATE_FLAG" == YES && "$BUILDER" != ‘slice‘ ]]; then getRev; edk2; clover; fi
if [[ "$BUILD_FLAG" == NO ]]; then
ClearScreen
# print updated remote and local revision
if [[ -d "${DIR_MAIN}"/edk2 ]]; then getRev; printRevisions; fi;
build
fi
set -e
exportPaths
case "$BUILDTOOL" in
GCC49 )
printHeader "BUILDTOOL is $BUILDTOOL"
if [[ "$SYSNAME" == Darwin ]]; then "${DIR_MAIN}"/edk2/Clover/buildgcc-4.9.sh; fi;;
GCC53 )
printHeader "BUILDTOOL is $BUILDTOOL"
if [[ "$SYSNAME" == Darwin ]]; then "${DIR_MAIN}"/edk2/Clover/build_gcc6.sh; fi;;
XCODE* ) exportXcodePaths; printHeader "BUILDTOOL is $BUILDTOOL";;
esac
if [[ "$BUILDER" != ‘slice‘ ]]; then buildEssentials; cleanCloverV2; fi
cd "${DIR_MAIN}"/edk2/Clover
START_BUILD=$(date)
# Slice has removed that flag entirely until new development will comes,
# so the follow is just a momentarily patch for XCODE5
if [[ "$SYSNAME" == Darwin ]]; then LTO_FLAG=""; fi
set +e
if [[ "$CUSTOM_BUILD" == NO ]]; then
# using standard options
case "$ARCH" in
IA32_X64 )
printHeader ‘boot6‘
doSomething --run-script ./ebuild.sh $FORCEREBUILD -x64 $DEFAULT_MACROS $LTO_FLAG -t $BUILDTOOL
printHeader ‘boot7‘
doSomething --run-script ./ebuild.sh $FORCEREBUILD -mc --no-usb $DEFAULT_MACROS $LTO_FLAG -t $BUILDTOOL
printHeader ‘boot3‘
doSomething --run-script ./ebuild.sh $FORCEREBUILD -ia32 $DEFAULT_MACROS $LTO_FLAG -t $BUILDTOOL;;
X64 )
printHeader ‘boot6‘
backupBoot7MCP79
doSomething --run-script ./ebuild.sh $FORCEREBUILD -x64 $DEFAULT_MACROS $LTO_FLAG -t $BUILDTOOL
printHeader ‘boot7‘
doSomething --run-script ./ebuild.sh $FORCEREBUILD -mc --no-usb $DEFAULT_MACROS $LTO_FLAG -t $BUILDTOOL;;
IA32 )
printHeader ‘boot3‘
backupBoot7MCP79
doSomething --run-script ./ebuild.sh $FORCEREBUILD -ia32 $DEFAULT_MACROS $LTO_FLAG -t $BUILDTOOL;;
esac
else
# using custom macros
case "$ARCH" in
IA32_X64 )
printHeader ‘boot6‘
doSomething --run-script ./ebuild.sh -x64 -fr $LTO_FLAG -t $BUILDTOOL # boot6 is always standard here
printHeader ‘Custom boot7‘
ebuildBorg
doSomething --run-script ./ebuildBorg.sh -x64 -fr ${DEFINED_MACRO} $LTO_FLAG -t $BUILDTOOL
printHeader ‘boot3‘
doSomething --run-script ./ebuild.sh -ia32 -fr ${DEFINED_MACRO} $LTO_FLAG -t $BUILDTOOL;;
X64 )
printHeader ‘Custom boot7‘ # boot7 is the only target here
backupBoot7MCP79
ebuildBorg
doSomething --run-script ./ebuildBorg.sh -x64 -fr $LTO_FLAG ${DEFINED_MACRO} -t $BUILDTOOL;;
IA32 )
printHeader ‘Custom boot3‘
backupBoot7MCP79
ebuildBorg
doSomething --run-script ./ebuild.sh -ia32 -fr ${DEFINED_MACRO} $LTO_FLAG -t $BUILDTOOL;;
esac
fi
if [[ "$SYSNAME" == Darwin ]]; then
if [[ "$BUILD_PKG" == YES || "$BUILD_ISO" == YES ]]; then
cd "${DIR_MAIN}"/edk2/Clover/CloverPackage
if [[ "$FORCEREBUILD" == "-fr" ]]; then make clean; fi
fi
if [[ "$BUILD_PKG" == YES ]]; then printHeader ‘MAKE PKG‘; CheckProprietary; eval "$MAKEPKG_CMD"; fi
if [[ "$BUILD_ISO" == YES ]]; then printHeader ‘MAKE ISO‘; make iso; fi
else
OsOpen "${CLOVERV2_PATH}"
fi
if [[ "$BUILDER" != ‘slice‘ ]]; then restoreClover; fi
printHeader "build started at:\n${START_BUILD}\nfinished at\n$(date)\n\nDone!\n"
printf ‘\e[3;0;0t‘
pressAnyKey "Clover was built successfully!" noclear; ClearScreen; build
}
main () {
# don‘t use sudo!
if [[ $EUID -eq 0 ]]; then printError "\nThis script should not be run using sudo!!\n\n"; exit 1; fi
# Cleaning up any old data if exists
if [[ -f /tmp/Build_Clover.tmp ]]; then rm -f /tmp/Build_Clover.tmp; fi
FindScriptPath
# Checking if any command line parameters has passed any value
if [[ "${cus_conf}" != "Y" ]]; then
if [[ "${BUILD_CLOVER_CFG_PATH:-}" ]]; then
userconf="${BUILD_CLOVER_CFG_PATH}"
else
userconf="$HOME/BuildCloverConfig.txt"
fi
fi
EDK2_REV="${EDK2_REV:-25480}"
if [[ "${useDefaults}" == "Y" ]]; then
LoadDefaults
elif [[ -f "$userconf" ]]; then
ReadConf
else
CreateDefaultConf
ReadConf
fi
# setting default paths
case "$MODE" in
"S" )
export DIR_MAIN=${DIR_MAIN:-"${HOME}"/src};;
"R" )
export DIR_MAIN="${SCRIPT_ABS_PATH}"/src
if [[ "${DIR_MAIN}" = "${DIR_MAIN%[[:space:]]*}" ]]; then
echo "good, no blank spaces in DIR_MAIN, continuing.."
else
ClearScreen; printError "Error: MODE=\"R\" require a path with no spaces in the middle, exiting!\n"; exit 1
fi;;
* )
ClearScreen; printError "Error: unsupported MODE\n"; exit 1;;
esac
SVN_STDERR_LOG="${DIR_MAIN}/svnLog.txt"
CLOVERV2_PATH="${DIR_MAIN}/edk2/Clover/CloverPackage/CloverV2"
PKG_PATH="${DIR_MAIN}/edk2/Clover/CloverPackage/package"
LOCALIZABLE_FILE="${PKG_PATH}/Resources/templates/Localizable.strings"
ebuildB="${DIR_MAIN}/edk2/Clover/ebuildBorg.sh"
ebuild="${DIR_MAIN}/edk2/Clover/ebuild.sh"
# tools_def.txt provide lto flags for GCC53 in linux
if [[ "$SYSNAME" == Linux ]]; then macros+=(‘DISABLE_LTO‘); fi
# Setting the build tool (Xcode or GCC)
case "$SYSNAME" in
Darwin )
case "$Build_Tool" in
"XCODE" | "xcode" ) checkXcode; BUILDTOOL="$XCODE";;
"GNU" | "gnu" ) [[ "$GNU" == "" ]] && BUILDTOOL="GCC53" || BUILDTOOL="$GNU";;
* ) printError "Wrong build tool: $Build_Tool. It should be \"XCODE\" or \"GNU\" !!!"; exit 1;;
esac;;
Linux ) [[ "$GNU" == "" ]] && BUILDTOOL="GCC53" || BUILDTOOL="$GNU";;
esac
# print local Script revision with relative info
printCloverScriptRev
printHeader "By Micky1979 based on Slice, Zenith432, STLVNUB, JrCs, cecekpawon, Needy,\ncvad, Rehabman, philip_petev, ErmaC\n\nSupported OSes: macOS X, Ubuntu (16.04/16.10), Debian Jessie and Stretch"
# print the remote and the local revision
if [[ -d "${DIR_MAIN}"/edk2 ]]; then getRev; printRevisions; fi;
# readding removed macro CHECK_FLAGS on old source
if [[ "$LOCAL_REV" -lt "4209" ]]; then macros+=("CHECK_FLAGS"); fi
if [[ "$DISABLE_CLEAR" != "YES" ]]; then printf ‘\e[8;34;90t‘; fi
build
}
# --------------------------------------
# MAIN CODE
# --------------------------------------
if [[ $# -eq 0 ]]; then main; fi
while [[ $# -gt 0 ]]; do
case "${1}" in
--defaults ) useDefaults="Y";;
--edk2rev ) if [[ -n "${2}" && "${2}" =~ ^[0-9]+$ ]]; then
EDK2_REV="${2}"
cus_edk2="Y"
fi
shift;;
--cfg ) if [[ -n "${2}" && -f "${2}" ]]; then
userconf="${2}"
cus_conf="Y"
fi
shift;;
* ) printf "\e[1m%s\e[0m\n" "Invalid option: ${1} !" >&2; usage; exit 1;;
esac
shift
done
main
时间： 2024-07-29 10:14:08