在MyEclipse中启动Tomcat时出现错误，错误信息如下：
严重: Failed to initialize end point associated with ProtocolHandler ["http-bio-8080"]
这是由于8080端口冲突导致的。
关掉MyEclipse后，打开任务管理器，将名字为javaw.exe的进程全部结束。然后重新打开MyEclipse，启动Tomcat就可以了。
这样问题就解决了，希望对大家有帮助。
时间： 2024-07-31 00:06:41
【Error】JavaWeb: 严重: Failed to initialize end point associated with ProtocolHandler ["http-bio-8080"]
【Error】JavaWeb: 严重: Failed to initialize end point associated with ProtocolHandler ["http-bio-8080"]的相关文章
解决sever 2008中tomcat的报错 init Failed to initialize end point associated with ProtocolHandler ["http-nio-80"]
错误现象: 01-Aug-2017 14:59:50.140 信息 [main] org.apache.coyote.AbstractProtocol.init Initializing ProtocolHandler ["http-nio-80"]01-Aug-2017 14:59:50.182 严重 [main] org.apache.coyote.AbstractProtocol.init Failed to initialize end point associated wit
端口占用的一种形式 Failed to initialize end point associated with ProtocolHandler ["ajp-bio-8090"] java.net.BindException: Address already in use: JVM_Bind <null>:8090
严重: Failed to initialize end point associated with ProtocolHandler ["ajp-bio-8090"]java.net.BindException: Address already in use: JVM_Bind <null>:8090 at org.apache.tomcat.util.net.JIoEndpoint.bind(JIoEndpoint.java:413) at org.apache.tomc
Tomcat启动报错org.apache.coyote.AbstractProtocol.init Failed to initialize end point associated with ProtocolHandler ["http-apr-8080"]”
1.使用netstat查看端口8080的使用情况: netstat -ano | findstr 8080 结果为: 最后一列表示使用8080端口的进程PID,如果返回结果为空则说明没有被使用. 2.可以使用takslist查看进程号对应的进程的信息 tasklist /fi "pid eq 10876" 结果: 3.强制结束进程 taskkill /f /pid 10876 结果: 4.重新运行tomcat,即可正常启动. 5.修改tomcat的端口为其他也可以.
running boot2docker -> error in run: Failed to get machine “boot2docker-vm”: machine does not exist
boot2docker start error in run: Failed to get machine "boot2docker-vm": machine does not exist boot2docker init error in run: Failed to initialize machine "boot2docker-vm": exit status 1 rm -rfi ~/VirtualBox\ VMs/boot2docker-vm/
【故障处理】ERROR 1872 (HY000): Slave failed to initialize relay log info structure from the repository
今天在使用冷备份文件重做从库时遇到一个报错,值得研究一下. 版本:MySQL5.6.27 一.报错现象 dba:(none)> start slave; ERROR 1872 (HY000): Slave failed to initialize relay log info structure from the repository 这个时候查看error.log: 2017-07-17 16:19:02 9022 [ERROR] Failed to open the relay log '.
ERROR 1872 (HY000): Slave failed to initialize relay log info structure from the repository
该问题的一般是由relay log没有在配置文件定义所致. 1.问题描述: mysql> start slave; mysql> system perror 1872 MySQL error code 1872 (ER_SLAVE_RLI_INIT_REPOSITORY): Slave failed to initialize relay log info structure from the repository 2.处理办法2.1.修改配置文件 诸如在my.cnf配置文件中添加如下项: r
Failed to initialize NVML: Unknown Error
DellR740安装NVIDIA M60驱动程序,执行nvidia-smi命令,提示"Failed to initialize NVML: Unknown Error".解决方法:https://www.dell.com/support/article/cn/zh/cnbsd1/sln308065/dell-poweredge14g-esxi%E5%B0%86%E8%BF%94%E5%9B%9E-%E6%97%A0%E6%B3%95%E5%88%9D%E5%A7%8B%E5%8C%96
MySQL复制ERROR 1794 (HY000): Slave is not configured or failed to initialize properly.
ERROR 1794 (HY000): Slave is not configured or failed to initialize properly. You must at least set --server-id to enable either a master or a slave. Additional error messages can be found in the MySQL error log. error log中有类似日志:2016-05-10 17:21:25 1
ERROR: transport error 202: bind failed: Address already in use
ERROR: transport error 202: bind failed: Address already in use ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510) JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c: