etcd集群添加节点

查看当前集群节点信息

# etcdctl member list --write-out=table
+------------------+---------+--------------------+--------------------------------+-----------------------------------------------------+------------+
|        ID        | STATUS  |        NAME        |           PEER ADDRS           |                    CLIENT ADDRS                     | IS LEARNER |
+------------------+---------+--------------------+--------------------------------+-----------------------------------------------------+------------+
| 44d8bc3300880bcd | started | sht-sgmhadoopdn-01 | http://sht-sgmhadoopdn-01:2380 | http://10.0.0.1:2379,http://sht-sgmhadoopdn-01:2379 |      false |
| d446fbe3296eb85a | started | sht-sgmhadoopdn-03 | http://sht-sgmhadoopdn-03:2380 | http://10.0.0.1:2379,http://sht-sgmhadoopdn-02:2379 |      false |
| e9136c1ad1754783 | started | sht-sgmhadoopdn-02 | http://sht-sgmhadoopdn-02:2380 | http://10.0.0.1:2379,http://sht-sgmhadoopdn-02:2379 |      false |
+------------------+---------+--------------------+--------------------------------+-----------------------------------------------------+------------+

添加新节点sht-sgmhadoopdn-04(172.16.101.66)

添加集群节点对应hosts文件解析

# cat /etc/hosts
127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
172.16.101.58    sht-sgmhadoopdn-01
172.16.101.59    sht-sgmhadoopdn-02
172.16.101.60    sht-sgmhadoopdn-03
172.16.101.66    sht-sgmhadoopdn-04

在现有集群接点添加新节点

# etcdctl member add sht-sgmhadoopdn-04 --peer-urls="http://sht-sgmhadoopdn-04:2380"
Member 7796493c3943f891 added to cluster 69bef0b9ccf44365

ETCD_NAME="sht-sgmhadoopdn-04"
ETCD_INITIAL_CLUSTER="sht-sgmhadoopdn-01=http://sht-sgmhadoopdn-01:2380,sht-sgmhadoopdn-04=http://sht-sgmhadoopdn-04:2380,sht-sgmhadoopdn-03=http://sht-sgmhadoopdn-03:2380,sht-sgmhadoopdn-02=http://sht-sgmhadoopdn-02:2380"
ETCD_INITIAL_ADVERTISE_PEER_URLS="http://sht-sgmhadoopdn-04:2380"
ETCD_INITIAL_CLUSTER_STATE="existing"

新节点的etcd配置文件必须包括以上输出内容

查看当前集群信息

# etcdctl member list --write-out=table
+------------------+-----------+--------------------+--------------------------------+-----------------------------------------------------+------------+
|        ID        |  STATUS   |        NAME        |           PEER ADDRS           |                    CLIENT ADDRS                     | IS LEARNER |
+------------------+-----------+--------------------+--------------------------------+-----------------------------------------------------+------------+
| 44d8bc3300880bcd |   started | sht-sgmhadoopdn-01 | http://sht-sgmhadoopdn-01:2380 | http://10.0.0.1:2379,http://sht-sgmhadoopdn-01:2379 |      false |
| 7796493c3943f891 | unstarted |                    | http://sht-sgmhadoopdn-04:2380 |                                                     |      false |
| d446fbe3296eb85a |   started | sht-sgmhadoopdn-03 | http://sht-sgmhadoopdn-03:2380 | http://10.0.0.1:2379,http://sht-sgmhadoopdn-02:2379 |      false |
| e9136c1ad1754783 |   started | sht-sgmhadoopdn-02 | http://sht-sgmhadoopdn-02:2380 | http://10.0.0.1:2379,http://sht-sgmhadoopdn-02:2379 |      false |
+------------------+-----------+--------------------+--------------------------------+-----------------------------------------------------+------------+

新节点配置etcd

etcd系统服务文件

# cat /usr/lib/systemd/system/etcd.service
[Unit]
Description=etcd service
Documentation=https://github.com/etcd-io/etcd
After=network.target
After=network-online.target
Wants=network-online.target

[Service]
User=tnuser
Type=notify
EnvironmentFile=/usr/local/etcd/etcd.conf
WorkingDirectory=/usr/local/etcd
ExecStart=/usr/local/etcd/etcd
Restart=always
RestartSec=10s
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

etcd配置文件

# cat /usr/local/etcd/etcd.conf
ETCD_NAME="sht-sgmhadoopdn-04"
ETCD_DATA_DIR="/usr/local/etcd/data"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster-01"
ETCD_INITIAL_CLUSTER_STATE="existing"
ETCD_LISTEN_CLIENT_URLS="http://0.0.0.0:2379"
ETCD_ADVERTISE_CLIENT_URLS="http://sht-sgmhadoopdn-01:2379,http://10.0.0.1:2379"
ETCD_LISTEN_PEER_URLS="http://0.0.0.0:2380"
ETCD_INITIAL_ADVERTISE_PEER_URLS="http://sht-sgmhadoopdn-04:2380"
ETCD_INITIAL_CLUSTER="sht-sgmhadoopdn-01=http://sht-sgmhadoopdn-01:2380,sht-sgmhadoopdn-02=http://sht-sgmhadoopdn-02:2380,sht-sgmhadoopdn-03=http://sht-sgmhadoopdn-03:2380,sht-sgmhadoopdn-04=http://sht-sgmhadoopdn-04:2380"
ETCD_ENABLE_V2="true"

启动新节点

# systemctl start etcd

再次查看集群状态

# etcdctl member list --write-out=table
+------------------+---------+--------------------+--------------------------------+-----------------------------------------------------+------------+
|        ID        | STATUS  |        NAME        |           PEER ADDRS           |                    CLIENT ADDRS                     | IS LEARNER |
+------------------+---------+--------------------+--------------------------------+-----------------------------------------------------+------------+
| 44d8bc3300880bcd | started | sht-sgmhadoopdn-01 | http://sht-sgmhadoopdn-01:2380 | http://10.0.0.1:2379,http://sht-sgmhadoopdn-01:2379 |      false |
| 7796493c3943f891 | started | sht-sgmhadoopdn-04 | http://sht-sgmhadoopdn-04:2380 | http://10.0.0.1:2379,http://sht-sgmhadoopdn-01:2379 |      false |
| d446fbe3296eb85a | started | sht-sgmhadoopdn-03 | http://sht-sgmhadoopdn-03:2380 | http://10.0.0.1:2379,http://sht-sgmhadoopdn-02:2379 |      false |
| e9136c1ad1754783 | started | sht-sgmhadoopdn-02 | http://sht-sgmhadoopdn-02:2380 | http://10.0.0.1:2379,http://sht-sgmhadoopdn-02:2379 |      false |
+------------------+---------+--------------------+--------------------------------+-----------------------------------------------------+------------+

将各节点etcd.conf配置文件的变量ETCD_INITIAL_CLUSTER添加新节点信息，然后依次重启。

原文地址：https://www.cnblogs.com/ilifeilong/p/11625151.html

时间： 2024-11-10 14:40:52

etcd集群添加节点的相关文章

CDH集群添加节点服务器步骤

1.解压安装包到/opt目录下 tar -zxvf cloudera--el6-cm5.7.1_x86_64.tar.gz -C /opt/ 2.修改agent下的config.ini文件,将server_host设置为server所在服务器主机名 vim /opt/cm-5.7.1/etc/cloudera-scm-agent/config.ini 3.创建cloudera-scm用户 useradd --system --home=/opt/cm-5.7.1/run/cloudera-scm

elasticsearch集群添加节点

最简配置文件: cluster.name: your_cluster_name node.name: your_ip network.host: 0.0.0.0 http.port: your_port discovery.zen.ping.multicast.enabled: false discovery.zen.ping.unicast.hosts: ["xx.xx.xx.xx","xx.xx.xx.xx1","xx.xx.xx.xx2"

etcd集群部署与遇到的坑

在k8s集群中使用了etcd作为数据中心,在实际操作中遇到了一些坑.今天记录一下,为了以后更好操作. ETCD参数说明 —data-dir 指定节点的数据存储目录,这些数据包括节点ID,集群ID,集群初始化配置,Snapshot文件,若未指定—wal-dir,还会存储WAL文件: —wal-dir 指定节点的was文件的存储目录,若指定了该参数,wal文件会和其他数据文件分开存储. —name 节点名称 —initial-advertise-peer-urls 告知集群其他节点url. — li

etcd集群部署与遇到的坑(转)

使用Kubeadm创建k8s集群之节点部署（三十一）

前言本篇部署教程将讲述k8s集群的节点(master和工作节点)部署,请先按照上一篇教程完成节点的准备.本篇教程中的操作全部使用脚本完成,并且对于某些情况(比如镜像拉取问题)还提供了多种解决方案.不过基于部署环境和k8s的复杂性,我们需要对k8s集群部署过程中的一些步骤都有所了解,尤其是“kubeadm init”命令. 目录主节点部署 Kubeadm以及相关工具包的安装批量拉取k8s相关镜像使用“kubeadm init”启动k8s主节点启动k8s主节点 kubectl认证安装f

redis 集群新增节点，slots槽分配，删除节点， [ERR] Calling MIGRATE ERR Syntax error, try CLIENT (LIST | KILL | GET...

CentOS 部署Etcd集群

一.环境介绍操作系统信息:CentOS 7 64位服务器信息: 192.168.80.130 Etcd-master 192.168.80.131 Etcd-node1 192.168.80.132 Etcd-node2 二.部署前准备 1.设置免密登录 [Master] [[email protected] ~]# ssh-keygen [[email protected] ~]# ssh-copy-id -i /root/.ssh/id_rsa.pub Etcd-node1 [

Centos7下Etcd集群搭建

一.简介 "A highly-available key value store for shared configuration and service discovery." Etcd是coreos开发的分布式服务系统,内部采用raft协议作为一致性算法.作为一个高可用的配置共享.服务发现的键值存储系统,Etcd有以下的特点: 1)简单:安装配置简单,而且提供了 HTTP API 进行交互,使用也很简单 2)安全:支持 SSL 证书验证 3)快速:根据官方提供的数据,单实例支持每秒

etcd集群故障处理(转)

1. etcd安装 rpm -ivh etcd-3.2.15-1.el7.x86_64.rpm systemctl daemon-reload systemctl enable etcd systemctl start etcd export ETCDCTL_API=3 systemctl status etcd hosts如下 192.168.0.100 etcd01 192.168.0.101 etcd02 192.168.0.102 etcd03 2. etcd配置 etcd02配置如下,