如何在CCS上生成.txt文件并烧录到MSP430

1，在CCS上正确创建工程文件。

新建工程：File-New-CCS Project

2，在main.c文件中编写程序并保存。

 1 #include <msp430f169.h>
 2 /*
 3  * 软件延时
 4  */
 5 #define CPU_F1 ((double)1000000)
 6 #define delay_us1M(x) __delay_cycles((long)(CPU_F1*(double)x/1000000.0))
 7 #define delay_ms1M(x) __delay_cycles((long)(CPU_F1*(double)x/1000.0))
 8
 9 /**
10  * main.c
11  */
12 int main(void)
13 {
14     unsigned char j,k;
15     WDTCTL = WDTPW + WDTHOLD;//关看门狗
16     P6DIR = 0xff;//设置P4端口为输出端口
17     while(1)
18     {
19         k = 1;
20         for(j=0;j<8;j++)//循环8次，即D1~D8轮流点亮
21         {
22             P6OUT = ~k;//反相输出，低电平点亮LED
23             delay_ms1M(300);//延时
24             k=k<<1;//左移一位
25         }
26     }
27
28 }

3编译程序：Project-Build All

4,配置CCS使其产生.hex可执行文件（用Protues仿真时下载芯片的时.hex文件）

Project-Properties-MSP430 Hex Utility

勾选 Enable MSP430 Hex Utility 再 Apply and Close 运用并关闭

5，此时再次去编译程序，会产生.hex文件

结果：

**** Build of configuration Debug for project LCD ****

"D:\\TI\\ccsv8\\utils\\bin\\gmake" -k -j 4 all -O

gmake[1]: ‘LCD.out‘ is up to date.
Building files: "LCD.out"
Invoking: MSP430 Hex Utility
"D:/TI/ccsv8/tools/compiler/ti-cgt-msp430_18.1.2.LTS/bin/hex430" --memwidth=8 --romwidth=8 -o "LCD.hex" "LCD.out"
Translating to Extended Tektronix format...
"LCD.out" .text ==> .text
"LCD.out" DACDMA ==> DACDMA
"LCD.out" PORT2 ==> PORT2
"LCD.out" USART1TX ==> USART1TX
"LCD.out" USART1RX ==> USART1RX
"LCD.out" PORT1 ==> PORT1
"LCD.out" TIMERA1 ==> TIMERA1
"LCD.out" TIMERA0 ==> TIMERA0
"LCD.out" ADC12 ==> ADC12
"LCD.out" USART0TX ==> USART0TX
"LCD.out" USART0RX ==> USART0RX
"LCD.out" WDT ==> WDT
"LCD.out" COMPARATORA ==> COMPARATORA
"LCD.out" TIMERB1 ==> TIMERB1
"LCD.out" TIMERB0 ==> TIMERB0
"LCD.out" NMI ==> NMI
"LCD.out" .reset ==> .reset
Finished building: "LCD.out"

**** Build Finished ****

6,再次对CCS进行配置，将.hex文件转换成.txt文件，具体步骤如下：

a、点击Project ,选择Properties；
b、选择 Build - Steps
c、在Post-build steps中加入下列语句,运用并关闭即可：
"${CG_TOOL_HEX}" --ti_txt "${BuildArtifactFileName}" -o "${BuildArtifactFileBaseName}.txt" -order MS -romwidth 16

7，再次编译程序，将产生.txt文件（可能会有编译无效，再进去看看配置的情况，然后在编译。也可以去工程文件夹中看看是否生成.txt文件）

结果：

**** Build of configuration Debug for project LCD ****

"D:\\TI\\ccsv8\\utils\\bin\\gmake" -k -j 4 all -O

"D:/TI/ccsv8/tools/compiler/ti-cgt-msp430_18.1.2.LTS/bin/hex430" --ti_txt "LCD.out" -o "LCD.txt" -order MS -romwidth 16
Translating to TI-TXT format...
"LCD.out" .text ==> .text
"LCD.out" DACDMA ==> DACDMA
"LCD.out" PORT2 ==> PORT2
"LCD.out" USART1TX ==> USART1TX
"LCD.out" USART1RX ==> USART1RX
"LCD.out" PORT1 ==> PORT1
"LCD.out" TIMERA1 ==> TIMERA1
"LCD.out" TIMERA0 ==> TIMERA0
"LCD.out" ADC12 ==> ADC12
"LCD.out" USART0TX ==> USART0TX
"LCD.out" USART0RX ==> USART0RX
"LCD.out" WDT ==> WDT
"LCD.out" COMPARATORA ==> COMPARATORA
"LCD.out" TIMERB1 ==> TIMERB1
"LCD.out" TIMERB0 ==> TIMERB0
"LCD.out" NMI ==> NMI
"LCD.out" .reset ==> .reset