Guide to update the Cisco Phone Firmware via CME

Guide to update the firmware:

Step 1, Download the Firmware
1) Download it via by https://software.cisco.com/download/home
2) Find the related the phone module , and then download the SCCP/SIP fireware, normally the phone will be worked as the SCCP,
3) The firmware since 9.0 the file extension will be changed as following show:

Step2, copy firmware into CME router via TFTP
Run command: copy tftp flash:
Commits:
Please copy all the file (all extension) into the flash.

Step3, configure CME as tftp-server to make the Phone download the firmware:
Run the command: tftp-server flash: <filename> with all the extension
For instance: tftp-server flash:BOOT69xx.0-0-0-14.zz.sgn

Step4, configure the 6921 load the firmware
Run the command:
telephony-service
load 6921 SCCP69xx.9-4-1-3SR3
create cnf-files

step 5, troubleshooting
run commands:
show ephone phone-load
debug tftp events
show log

原文地址：http://blog.51cto.com/zhangfang526/2152842

时间： 2024-10-20 14:41:26

Guide to update the Cisco Phone Firmware via CME的相关文章

通过外部TFTP升级Cisco IPPhone firmware的方法

Cisco Call Manager 系统从7.1 升级的9.1, 部分电话7941和7942的firmware没有成功从8-3-1s升级到9-3-1SR1. 虽然这样的电话也能工作,但有时会自动重启.没升级成功的主要原因是8-3-1S必须经过一个中间版本8-5-2S才能升级到9-3-1SR1.没升级成功的电话分别在5个站点,Call Manager 在其中一个站点.跨WAN升级很慢.因此想找个本地服务器的方法. 在话机可用时升级的方法 下载相应的固件ZIP包.如图1 用TFTPD32做TFTP

Guide on update MPPS software to the newest V16.1.02

Newest MPPS ECU Chip Tuning for EDC15 EDC16 EDC17 inkl CHECKSUM has newly upgraded to V16.1.02 MPPS V16.1.02 System Requirements: Requires Windows XP sp2 How to update MPPS ECU programmer software to latest V16.1.02: 1) Contact Careucar.com customer

How to update multi functions Opcom to V1.59

There are a lot of cheap clone OP-COM with VAUX-COM 120309in the market, new opcom firmware 1.59 is available now. As we all know, china clone opel Op-com opcom diagnostic interface has been updated to V1.59.All of them are ork with 2010.08 opcom sof

Cisco IOS debug command reference

Command A through D debug aaa accounting through debug auto-config debug aaa accounting : to display information on accountable events as they occur(in privileged EXEC mode) no debug aaa accounting : to disable debugging output debug aaa authenticati

Android系统Recovery工作原理之使用update.zip升级过程分析（六）---Recovery服务流程细节【转】

本文转载自:http://blog.csdn.net/mu0206mu/article/details/7465439  Android系统Recovery工作原理之使用update.zip升级过程分析(六)---Recovery服务流程细节            Recovery服务毫无疑问是Recovery启动模式中最核心的部分.它完成Recovery模式所有的工作.Recovery程序对应的源码文件位于:/gingerbread0919/bootable/recovery/recovery

Security Checklist （路由器安全checklist）

Security Checklist Website by     Michael Horowitz  Home | Introduction | Router Bugs | Security Checklist | Tests | Resources | About | The most expert person in the world can only make a router as secure as the firmware (router OS) allows. The foll

Proxmark3的固件介绍,编译和烧写

http://www.wwwer.net/archives/proxmark3-introduced.html Proxmark3固件介绍 Proxmark3是一个开源的安全设备,故此其内置的固件也是因开源而不断的进行升级以及修改, 而我们团购回来的版本是较为稳定的r486,因为每次编译固件生成bin的时候, 我们不仅仅是在编译更新Proxmark3自身的固件也在编译我们PC端使用的客户端. Proxmark3客户端与固件的关系 因为Proxmark3的原理是PC端只是基于命令的回显以及发送,不

ubuntu 14.04 set up fog 0.32

long time havn't written things, dont' ask me why writting in English~ fog 0.32 older, yes, but company still using it. two major failures: vsftpd and udpcast vsftpd: ubuntu 14.04 start using service instead of /etc/init.d modify /fogDownloadDir/lib/

Android5.0 Recovery源代码分析与定制(一)【转】

本文转载自:http://blog.csdn.net/morixinguan/article/details/72858346 版权声明:本文为博主原创文章,如有需要,请注明转载地址:http://blog.csdn.net/morixinguan.若是侵权用于商业用途,请联系博主,否则将追究责任 在Tiny4412的Android5.0源代码中: bootable/recovery/recovery.cpp是recovery程序的主文件. 仔细一看,对比了其它平台的recovery源代码,除了