kali 1.1.0 boot failed

从几个月前的14.10 daily 版本就有U盘刻录无法启动的现象，相关bug可参见：
        https://bugs.launchpad.net/ubunt ... reator/+bug/1325801
       系统镜像本身没有任何问题，刻录光盘、dd到U盘启动都是正常的。此问题是由于ubuntu使用了最新的syslinux版本，而大多U盘刻录软件还未支持最新的syslinux版本导致u盘无法启动，现在ubuntu系统自带及部分刻录工具是已经支持最新ubuntu14.10的U盘刻录。
       通常遇到问题的都是windows用户，请更新或使用推荐的刻录软件制作U盘启动盘，具体如下：

  • linux的用mkusb
  • windows的用Win32DiskImager 来制作U盘启动

具体用法：
       https://wiki.ubuntu.com/Win32DiskImager/iso2usb
       https://help.ubuntu.com/community/mkusb

https://wiki.ubuntu.com/Win32DiskImager/iso2usb

iso2usb

目录

  1. Win32DiskImager makes an Ubuntu family USB boot drive in Windows

    1. Introduction
    2. Graphical user interface tools in Windows
  2. Screenshots and comments
    1. Start and overview
    2. Check device and Write
    3. Confirm overwrite alias Final Warning
    4. Progress view
    5. Work done :-) Remember to eject the pendrive safely
  3. Links

Return to the main Win32DiskImager page

Win32DiskImager makes an Ubuntu family USB boot drive in Windows

Introduction

A version with screenshots is published now, because it is needed ...

[This is the situation now with the new Ubuntu 14.10 version] Win32DiskImager is particularly good for pre-release testing and new releases, when the standard tools like Unetbootin might not be ready (if the configuration of the booting has been changed since the previous release).

It is possible and easy to copy/flash/clone an ISO file to a mass storage device, typically a USB pendrive. The method under the hood is the same as is described in the wiki page about mkusb.

I (sudodus alias Nio Wiklund) have tested this method and it works in Windows XP, Windows 8 and Windows Technical Preview (alias ‘Windows 10‘). I have not tested in Vista and Windows 7, but I am almost sure that it works in those versions too. The following screenshots were made in Windows Technical Preview.

Graphical user interface tools in Windows

Download an Ubuntu ISO file

Download an ISO file with standard Ubuntu or one of the many Ubuntu flavours, Kubuntu, Lubuntu, Xubuntu, Ubuntu Gnome ... using your web browser or download a torrent file and get the iso file faster that way.

Download and install Win32DiskImager and md5summer

Download the following help programs

http://www.md5summer.org http://sourceforge.net/projects/win32diskimager

Check the md5sums versus the lists at

https://help.ubuntu.com/community/UbuntuHashes

Install the programs and run them (which is straight-forward in Windows).

Screenshots and comments

Start and overview

md5summer

The window at the top left corner MD5sums: Generating... is the md5summer window. It helps, but is not necessary.

Ignore this warning

There can be a warning, that you need to format the disk in drive ... (at 1)

This is because Windows might not recognize the file system on the pendrive. But do not worry! The process to copy/flash/clone the iso file will overwrite the drive anyway, so it is completely meaningless to format it. One the other hand, if you want to re-use the pendrive after installing Ubuntu, then you might want to wipe the first megabyte with mkusb and then format it with gparted.

Select file

Select the ISO file that you want to use in the Win32 Disk Imager window. Click on the symbol, and get the file selector (in the right bottom corner). The default is to show image (IMG) files. ISO files are a special kind of ‘synthetic image files‘. They will be displayed when you select all kinds of files *.* (at 2).

Check device and Write

You can tick the box at the MD5 hash and check that it matches the value from Ubuntuhashes (instead of using md5summer).

WARNING

Check very carefully, that the device (F: in the picture) is really the USB pendrive, that you want to use. The best method is to have only the intended target USB drive connected to avoid the risk to overwrite a USB hard disk drive with all the family pictures and video clips !!!

Write

When you are sure, you can click on the Write button to start the process.

Confirm overwrite alias Final Warning

Progress view

This demo uses a Sandisk Cruzer Blade 4 GB as target drive. It is slow (5 MB/s) but reliable for booting. A USB 3 pendrive in a USB 2 port can be 6 times faster due to faster flash memory. See this link.

Work done :-) Remember to eject the pendrive safely

It is important to flush the buffers, to finish writing before pulling the pendrive. This is done with ‘Eject safely‘. It is also done at a correct shutdown or reboot.

Good luck and welcome to the linux world!

Links

You find more information at the following wiki page (and links from it)

https://help.ubuntu.com/community/Installation/FromUSBStick


.

时间： 2024-08-25 12:15:50

kali 1.1.0 boot failed的相关文章

修改nignx报错Nginx [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use)

Nginx [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) 这个错误是修改了nginx的配置时出现,表名80端口被程序占用 列出所有端口: netstat –ntlp 发现端口是被nginx本身占用了,于是关闭占用80端口的程序 sudo fuser -k 80/tcp 之后开启nginx无异常 使用linux一键安装包安装的环境 http://lnmp.org/

Kali Linux 1.0 新手折腾笔记（2013.3.21更新）

rootoorotor昨天折腾了 Kali Linux 1.0,把大概的配置过程记录下来,希望对想接触或使用Kali Linux的同学有所帮助. 请注意: 1.本文为面向新手的教程,没技术含量,没事瞎折腾,感觉好玩…..如果您可以熟练使用Debian Linux或者使用过Arch Linux.Gentoo或者是自己LFS你完全可以无视本文. 2.如果您使用kali Linux只作为渗透测试之用,rootoorotor建议您在kali.org直接下载Kali Linux VMware版本在虚拟机里

U盘做为系统盘安装系统，出现start booting from usb device和boot failed解决方案

最近在旧机子上安装Centos系统的时候,用大白菜或者是UltraISO制作完U盘的系统盘后,出现了start booting from usb device和boot failed,一直很郁闷,以为是系统的原因.网上说把syslinux那个文件修改或者是替换,这些都不管用.最后发现是制作U启动的时候的格式,与bios启动U盘的格式不相符. BOIS启动USB有几种形式:USB-HDD,USB-FDD,USB-ZIP,USB-CDROM 1. ZIP模式是指把U盘模拟成ZIP驱动器模式,启动后U

Starting nginx: nginx: [emerg] bind() to 0.0.0.0:8088 failed (13: Permission denied) nginx 启动失败

Starting nginx: nginx: [emerg] bind() to 0.0.0.0:8088 failed (13: Permission denied) nginx 启动失败,日志里面报错信息如下: Starting nginx: nginx: [emerg] bind() to 0.0.0.0:8088 failed (13: Permission denied) 权限拒绝,经检查发现是开启selinux 导致的. 直接关闭 getenforce   这个命令可以查看当前是否开

VC6.0 出现failed to (or don't know how to) build 原因及解决方法

http://blog.sina.com.cn/s/blog_a37606de01016kit.html 在VC++6.0中出现failed to (or don't know how to) build 'D:\DIB类\CDib.cpp该如何解决呢 ? 原因是这个类是在别的工程中建立的,后来通过加入文件加入本工程的,当这个工程被复制到别的目录或者该文件原来在的工程换了位置就无法编译通过过了. 解决办法:找到××.dsp文件(××为工程名),用记事本打开,找到如下: SOURCE="..\DI

centos下nginx bind() to 0.0.0.0:8090 failed

cnetos下修改端口成非常规端口出现报错 2014/01/10 09:20:02 [emerg] 30181#0: bind() to 0.0.0.0:8090 failed (13: Permission denied) 原因seLinux限制了http的端口 方法一:关闭seLinux 方法二:添加seLinux允许的http端口 1.查看端口是否加入seLinux允许的http端口 semanage port -l | grep http_port_t 2.添加端口 semanage p

[emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use)错误原因

nginx重启报错:[emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) 原因:这个是nginx重启时经常遇到的,这个是nginx重复重启导致自己占用了端口.(一般可能是因为自己设置了开机自动启动,或者重复启动) 解决方法 : killall -9 nginx 杀掉nginx 的进程  然后重启(service nginx restart 或 sudo /usr/local/nginx/sbin/nginx) 版权声明

bind() to 0.0.0.0:443 failed (10013: An attempt was made to access a socket in a way forbidden by it

1. 启动 nginx 报错:bind() to 0.0.0.0:443 failed (10013: An attempt was made to access a socket in a way forbidden by its access permissions 2.这是由于其他进程占用了nginx 的端口. 3. 解决办法: 运行 cmd, 输入netstat -aon|findstr "443" 找到 0.0.0.0:443,找到 PID,在任务管理器结束进程. vmwar

Linux教程之：Nginx [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use)

Nginx [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) 使用命令关闭占用80端口的程序 sudo fuser -k 80/tcp 互联网+时代,时刻要保持学习,携手千锋PHP-PHP培训的实力派,Dream It Possible.