Linux错误代码

#ifndef _I386_ERRNO_H
#define _I386_ERRNO_H
#define EPERM           1 /* Operation not permitted */
#define ENOENT          2 /* No such file or directory */
#define ESRCH           3 /* No such process */
#define EINTR           4 /* Interrupted system call */
#define EIO             5 /* I/O error */
#define ENXIO           6 /* No such device or address */
#define E2BIG           7 /* Arg list too long */
#define ENOEXEC         8 /* Exec format error */
#define EBADF           9 /* Bad file number */
#define ECHILD          10 /* No child processes */
#define EAGAIN          11 /* Try again */
#define ENOMEM          12 /* Out of memory */
#define EACCES          13 /* Permission denied */
#define EFAULT          14 /* Bad address */
#define ENOTBLK         15 /* Block device required */
#define EBUSY           16 /* Device or resource busy */
#define EEXIST          17 /* File exists */
#define EXDEV           18 /* Cross-device link */
#define ENODEV          19 /* No such device */
#define ENOTDIR         20 /* Not a directory */
#define EISDIR          21 /* Is a directory */
#define EINVAL          22 /* Invalid argument */
#define ENFILE          23 /* File table overflow */
#define EMFILE          24 /* Too many open files */
#define ENOTTY          25 /* Not a typewriter */
#define ETXTBSY         26 /* Text file busy */
#define EFBIG           27 /* File too large */
#define ENOSPC          28 /* No space left on device */
#define ESPIPE          29 /* Illegal seek */
#define EROFS           30 /* Read-only file system */
#define EMLINK          31 /* Too many links */
#define EPIPE           32 /* Broken pipe */
#define EDOM            33 /* Math argument out of domain of func */
#define ERANGE          34 /* Math result not representable */
#define EDEADLK         35      /* Resource deadlock would occur */
#define ENAMETOOLONG    36      /* File name too long */
#define ENOLCK          37      /* No record locks available */
#define ENOSYS          38      /* Function not implemented */
#define ENOTEMPTY       39      /* Directory not empty */
#define ELOOP           40      /* Too many symbolic links encountered */
#define EWOULDBLOCK     EAGAIN  /* Operation would block */
#define ENOMSG          42      /* No message of desired type */
#define EIDRM           43      /* Identifier removed */
#define ECHRNG          44      /* Channel number out of range */
#define EL2NSYNC        45      /* Level 2 not synchronized */
#define EL3HLT          46      /* Level 3 halted */
#define EL3RST          47      /* Level 3 reset */
#define ELNRNG          48      /* Link number out of range */
#define EUNATCH         49      /* Protocol driver not attached */
#define ENOCSI          50      /* No CSI structure available */
#define EL2HLT          51      /* Level 2 halted */
#define EBADE           52      /* Invalid exchange */
#define EBADR           53      /* Invalid request descriptor */
#define EXFULL          54      /* Exchange full */
#define ENOANO          55      /* No anode */
#define EBADRQC         56      /* Invalid request code */
#define EBADSLT         57      /* Invalid slot */
#define EDEADLOCK       EDEADLK
#define EBFONT          59      /* Bad font file format */
#define ENOSTR          60      /* Device not a stream */
#define ENODATA         61      /* No data available */
#define ETIME           62      /* Timer expired */
#define ENOSR           63      /* Out of streams resources */
#define ENONET          64      /* Machine is not on the network */
#define ENOPKG          65      /* Package not installed */
#define EREMOTE         66      /* Object is remote */
#define ENOLINK         67      /* Link has been severed */
#define EADV            68      /* Advertise error */
#define ESRMNT          69      /* Srmount error */
#define ECOMM           70      /* Communication error on send */
#define EPROTO          71      /* Protocol error */
#define EMULTIHOP       72      /* Multihop attempted */
#define EDOTDOT         73      /* RFS specific error */
#define EBADMSG         74      /* Not a data message */
#define EOVERFLOW       75      /* Value too large for defined data type */
#define ENOTUNIQ        76      /* Name not unique on network */
#define EBADFD          77      /* File descriptor in bad state */
#define EREMCHG         78      /* Remote address changed */
#define ELIBACC         79      /* Can not access a needed shared library */
#define ELIBBAD         80      /* Accessing a corrupted shared library */
#define ELIBSCN         81      /* .lib section in a.out corrupted */
#define ELIBMAX         82      /* Attempting to link in too many shared libraries */
#define ELIBEXEC        83      /* Cannot exec a shared library directly */
#define EILSEQ          84      /* Illegal byte sequence */
#define ERESTART        85      /* Interrupted system call should be restarted */
#define ESTRPIPE        86      /* Streams pipe error */
#define EUSERS          87      /* Too many users */
#define ENOTSOCK        88      /* Socket operation on non-socket */
#define EDESTADDRREQ    89      /* Destination address required */
#define EMSGSIZE        90      /* Message too long */
#define EPROTOTYPE      91      /* Protocol wrong type for socket */
#define ENOPROTOOPT     92      /* Protocol not available */
#define EPROTONOSUPPORT 93      /* Protocol not supported */
#define ESOCKTNOSUPPORT 94      /* Socket type not supported */
#define EOPNOTSUPP      95      /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT    96      /* Protocol family not supported */
#define EAFNOSUPPORT    97      /* Address family not supported by protocol */
#define EADDRINUSE      98      /* Address already in use */
#define EADDRNOTAVAIL   99      /* Cannot assign requested address */
#define ENETDOWN        100     /* Network is down */
#define ENETUNREACH     101     /* Network is unreachable */
#define ENETRESET       102     /* Network dropped connection because of reset */
#define ECONNABORTED    103     /* Software caused connection abort */
#define ECONNRESET      104     /* Connection reset by peer */
#define ENOBUFS         105     /* No buffer space available */
#define EISCONN         106     /* Transport endpoint is already connected */
#define ENOTCONN        107     /* Transport endpoint is not connected */
#define ESHUTDOWN       108     /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS    109     /* Too many references: cannot splice */
#define ETIMEDOUT       110     /* Connection timed out */
#define ECONNREFUSED    111     /* Connection refused */
#define EHOSTDOWN       112     /* Host is down */
#define EHOSTUNREACH    113     /* No route to host */
#define EALREADY        114     /* Operation already in progress */
#define EINPROGRESS     115     /* Operation now in progress */
#define ESTALE          116     /* Stale NFS file handle */
#define EUCLEAN         117     /* Structure needs cleaning */
#define ENOTNAM         118     /* Not a XENIX named type file */
#define ENAVAIL         119     /* No XENIX semaphores available */
#define EISNAM          120     /* Is a named type file */
#define EREMOTEIO       121     /* Remote I/O error */
#define EDQUOT          122     /* Quota exceeded */
#define ENOMEDIUM       123     /* No medium found */
#define EMEDIUMTYPE     124     /* Wrong medium type */
#define ECANCELED       125     /* Operation Canceled */
#define ENOKEY          126     /* Required key not available */
#define EKEYEXPIRED     127     /* Key has expired */
#define EKEYREVOKED     128     /* Key has been revoked */
#define EKEYREJECTED    129     /* Key was rejected by service */
/* for robust mutexes */
#define EOWNERDEAD      130     /* Owner died */
#define ENOTRECOVERABLE 131     /* State not recoverable */
#endif
时间: 2024-11-06 09:30:50

Linux错误代码的相关文章

二进制安装MySQL5.5.39,磁盘空间不足导致MySQL无法启动

--添加用户和组 [[email protected] local]# groupadd [[email protected] local]# useradd -g mysql -s /sbin/nologin -d /opt/msyql mysql --创建目录 [[email protected] local]# mkdir /data/mysql/mysql_3306/{data,logs,tmp} -p --做软链接到/usr/local/mysql [[email protected]

zabbix监控中遇到的错误

今天增加监控的机器,遇到了各种各样的错误的,但多数都是基本问题 windows基本原因:防火墙 linux基本原因:防火墙与Selinux 错误代码: windows错误代码: Get value from agent failed: cannot connect to [[192.168.6.8]:10050]: [4] Interrupted system call [[email protected] ~]# zabbix_get -s 192.168.6.8 -p 10050 -k sy

Linux系统安装Discuz,通过windows浏览器访问遇到的一般性问题。错误代码403、462

在Linux系统里配置完虚拟主机后 vim /usr/local/apache2/conf/httpd.conf /vhosts   #搜索 将 # include conf/extra/httpd-vhosts.conf 前面的注释符号去掉,生效 vim /usr/local/apache2/conf/extra/httpd-vhosts.conf 配置完成后. 用浏览器访问www.test.com 或者 www.aaa.com      #自定义的域名或者别名 一.如果遇到错误代码403,打

依据linux Oops信息准确定位错误代码所在行

在linux下调tvp5150am1的过程中,遇到了一kernel oops,内容如下: [   66.714603] Unable to handle kernel paging request at virtual address 00100104 [   66.721658] pgd = d37d0000 [   66.724344] [00100104] *pgd=950c2831, *pte=00000000, *ppte=00000000 [   66.730587] Interna

Linux C错误代码

#define EPERM 1 /* Operation not permitted */ #define ENOENT 2 /* No such file or directory */ #define ESRCH 3 /* No such process */ #define EINTR 4 /* Interrupted system call */ #define EIO 5 /* I/O error */ #define ENXIO 6 /* No such device or addr

linux的oracle错误代码和解决方法总结(持续更新)

ora-12705: Cannot access NLS data files or invalid environment specified 解决方法:在oracle用户下输入命令 #unset NLS_LANG (亲测,不影响数据库系统运行)

【linux基础】16、软件包管理

一.软件包概述 1.相关概念 源码安装操作系统方式:通过宿主机安装 GPL:公布源码(c,c++) POSIX规范:Portable Operatin System (原代码)移植性 API:应用编程接口,兼容,意味开发库兼容,因此源代码可夸平台 ABI:应用二进制接口,兼容,编译后的程序可夸平台 库:就是函数\功能,可执行程序,本身不能作为程序执行的入口,但可以被调用 编译好的二进制格式 glibc:linux标准的C库 程序开发完成后要使用得经过的步骤: 预编译,编译,汇编,链接(把库文件链

Linux C 文件输入输出函数 fopen()、getc()、putc()、fclose()、fprintf()、fscanf()、fgets()、fputs()、fseek()、ftell()、fgetpos()、fsetpos() 详解

  fopen(打开文件) 定义函数 FILE * fopen(const char * path,const char * mode); 函数说明 参数path字符串包含欲打开的文件路径及文件名,参数mode字符串则代表着流形态. mode有下列几种形态字符串: r     打开只读文件,该文件必须存在. r+   打开可读写的文件,该文件必须存在. w    打开只写文件,若文件存在则文件长度清为0,即该文件内容会消失.若文件不存在则建立该文件. w+ 打开可读写文件,若文件存在则文件长度清

linux PAM 用户登录认证

PAM(Pluggable Authentication Modules )是由Sun提出的一种认证机制.它通过提供一些动态链接库和一套统一的API,将系统提供的服务 和该服务的认证方式分开,使得系统管理员可以灵活地根据需要给不同的服务配置不同的认证方式而无需更改服务程序,同时也便于向系 统中添加新的认证手段.从本篇开始会总结一些常用的pam模块及其实现的功能,今天讲的是pam_tally2模块. 一.参数与场景 应用场景:设置Linux用户连续N次输入错误密码进行登陆时,自动锁定X分钟或永久锁