day8-------socket网络编程

简单的socket  一个server同时只能处理一个链接   代码如下：

 1 server端代码
 2 #author = ruixin li
 3
 4 import socket
 5 server = socket.socket()
 6 server.bind(("0.0.0.0",5000))
 7 server.listen(5)
 8 print("开始监听")
 9 while True:
10     conn,addr = server.accept()
11     print("一个新连接")
12     print(conn,addr)
13     while True:
14         try:
15             data = conn.recv(1024)
16             print("收到的信息：",data)
17             conn.send(data.upper())
18         except ConnectionResetError as e:
19             print("客户端主动断开连接")
20             break
21 server.close()

 1 客户端程序
 2
 3 import socket
 4
 5
 6 cli = socket.socket()
 7 cli.connect(("localhost",5000))
 8 while True:
 9     inp = input("请输入指令：".strip())
10     if len(inp) == 0:
11         continue
12     else:
13         cli.send(inp.encode())
14         data = cli.recv(1024)
15         print(data)

python socket 实现简单的 ssh  命令

 1 #author  ruixin li
 2
 3 import socket
 4 import subprocess
 5 ips = input("请输入绑定的IP：")
 6 ports = int(input("请输入绑定的端口："))
 7 server = socket.socket()
 8 server.bind((ips,ports))
 9 server.listen(5)
10 print("开始监听")
11 while True:
12     print("跳到外部循环")
13     conn,addr = server.accept()
14     print("一个新连接")
15     print(conn,addr)
16     while True:
17         try:
18             date = conn.recv(1024)
19             if len(date) == 0:
20                 print("收到0信息，服务器主动断开连接")
21                 break
22             else:
23                 print("收到的信息：",date)
24                 msg = subprocess.Popen(date,stdout=subprocess.PIPE,stderr=subprocess.PIPE,shell=True)
25                 data = msg.stdout.read()
26                 print(data)
27                 dataerr = msg.stderr.read()
28                 print("err:",dataerr)
29                 if len(data) == 0:
30                     conn.send(dataerr)
31                 else:
32                     conn.send(data)
33         except ConnectionResetError as e:
34             print("客户端主动断开连接")
35             break
36 server.close()

客户端

 1 import socket
 2 ips = input("请输入要连接的IP：")
 3 ports = int(input("请输入要连接的端口："))
 4
 5 cli = socket.socket()
 6 cli.connect((ips,ports))
 7 while True:
 8     inp = input("请输入指令：".strip())
 9     if len(inp) == 0:
10         continue
11     else:
12         cli.send(inp.encode())
13         data = cli.recv(1024)
14         print(data)