Today, I would like to share the GM MDI Multiple pass thru Programming Tool Installation Instruction step by step:
Step 1: Open the software folder, double click “CD Start” → click “install”.
Step 2:Install the software in order: JAV A.EXE; Validat.exe; GMMDI Software.exe; Tech3Win.exe;.
Step 3: Automatic install all the files above, when have message “ Copying PCMCIA files..”, please don’t touch any keyboard or mouse, the GM MDI USB drive will automatic install.
Step 4: Finished with the installation, there will be have a message “ press any key to continue…” → press any key→software installation partly finished.
Step 5: Pls connect the USB cable to PC ( do not need to connect to the Car OBD at this time),connect USB to PC→detected on the lower right corner→choose automatic install→click next to finish.
Step 6: When USB drive installation finish, on your PC device manager, you will find a “MDI USB Device (COM…” on Port place. If not then pls find the drive on MDI folder on the CD and install, if still not successful, then pls check if the PC operation is correct or not.
Step 7: Open “GM MDI Manager” on the desk to do connection test (if the USB was correct installed, the red “X” on the dialogue will disappear, if the red “X” still on, then pls repeat step 6.
Step 8: Finish the installation above,connect your PC with internet(do not connect to the car OBD ) →open this website→activate lease→open this web:http://tis2web.eicp.net:9080/tis2web/→Write any user’s name and click ok→All choose OK /continue.
Step 9: In the main interface, please click “Global Diagnostic System2(GDS 2)” icon, →click GDS2 to run→software will update lease automatic→update finish software GDS2 (Launch GDS2 on the desk)→open automatically→choose the language→back to the main interface.
Attention:
Bottom left
will have a lease expire time. It need only your PC system time, don’t
change. Afterward we don’t need internet to update lease, so if there is
any remind indicate new update available, please do not click update.