1、
[[email protected] megactl-0.4.1]# ./megasasctl
a0 PERC H710 Mini encl:1 ldrv:1 batt:good
a0d0 1TiB RAID 10 2x2 optimal
unconfigured : a0e32s4 a0e32s5 a0e32s6 a0e32s7
a0e32s0 558GiB a0d0 online
a0e32s1 558GiB a0d0 online
a0e32s2 558GiB a0d0 online
a0e32s3 558GiB a0d0 online
a0e32s4 1TiB ready
a0e32s5 1TiB ready
a0e32s6 1TiB ready
a0e32s7 1TiB ready
2、[[email protected] megactl-0.4.1]# /opt/MegaRAID/MegaCli/MegaCli64 -CfgSpanAdd -r10 -Array0[32:4,32:5] -Array1[32:6,32:7] -a0
Unconfigured Physical Disk(s).
Exit Code: 0x26
3、/opt/MegaRAID/MegaCli/MegaCli64 -pdlist -a0
4、[[email protected] megactl-0.4.1]# /opt/MegaRAID/MegaCli/MegaCli64 -CfgForeign -Scan –a0
There are 3 foreign configuration(s) on controller 0.
Exit Code: 0x00
5、[[email protected] megactl-0.4.1]# /opt/MegaRAID/MegaCli/MegaCli64 -CfgForeign -Clear [a0]
Foreign configuration 0 is cleared on controller 0.
Foreign configuration 1 is cleared on controller 0.
Foreign configuration 2 is cleared on controller 0.
Exit Code: 0x00
6、[[email protected] megactl-0.4.1]# /opt/MegaRAID/MegaCli/MegaCli64 -CfgForeign -Scan –a0
There is no foreign configuration on controller 0.
Exit Code: 0x00
7、/opt/MegaRAID/MegaCli/MegaCli64 -CfgSpanAdd -r10 -Array0[32:4,32:5] -Array1[32:6,32:7] -a0
8、parted -s /dev/sdb -- mklabel gpt mkpart primary 0 100%
9、mkfs.ext3 /dev/sdb1
版权声明:本文为博主原创文章,未经博主允许不得转载。