Serializability

From Wikipedia, the free encyclopedia

In concurrency
control of databases,^[1][2] transaction
processing (transaction management), and various transactional applications
(e.g., transactional memory^[3] and software
transactional memory), both centralized and distributed,
a transaction schedule is serializable if
its outcome (e.g., the resulting database state) is equal to the outcome of its transactions executed serially, i.e., sequentially without overlapping in time. Transactions are normally executed concurrently (they overlap), since this is the most efficient
way. Serializability is the major correctness criterion for concurrent transactions‘ executions. It is considered the highest level of isolation between transactions,
and plays an essential role in concurrency control.（可串行性是并发事务执行的正确性标准。他认为是事务隔离星最高的的一层，并且在并发控制方面真有主要角色。） As
such it is supported in all general purpose database systems. Strong
strict two-phase locking (SS2PL) is a popular serializability mechanism utilized in most of the database systems (in various variants) since their early days in the 1970s.

Serializability theory provides the formal framework to reason about and analyze serializability and its techniques. Though it is mathematical in
nature, its fundamentals are informally (without Mathematics notation) introduced below.

Contents

[hide]

• 1 Database
  transaction
• 2 Correctness
  • 2.1 Correctness
    - serializability
  • 2.2 Relaxing
    serializability
• 3 View
  and conflict serializability
• 4 Enforcing
  conflict serializability
  • 4.1 Testing
    conflict serializability
  • 4.2 Common
    mechanism - SS2PL
  • 4.3 Other
    enforcing techniques
    • 4.3.1 Optimistic
      versus pessimistic techniques
    • 4.3.2 Serializable
      multi-version concurrency control
• 5 Distributed
  serializability
  • 5.1 Overview
• 6 See
  also
• 7 Notes
• 8 References

Database transaction[edit]

Main article: Database transaction

For this discussion a database transaction is a specific intended run (with specific parameters, e.g., with transaction identification, at least) of a computer program (or programs) that accesses a database (or databases). Such a program is written
with the assumption that it is running in isolation from other executing programs, i.e., when running, its accessed data (after the access) are not changed by other running programs. Without this assumption the transaction‘s results are unpredictable
and can be wrong. The same transaction can be executed in different situations, e.g., in different times and locations, in parallel with different programs. A live transaction (i.e., exists in a computing environment with already allocated computing
resources; to distinguish from a transaction request, waiting to get execution resources) can be in one of three states, or phases:

1. Running - Its program(s) is (are) executing.
2. Ready - Its program‘s execution has ended, and it is waiting to be Ended (Completed).
3. Ended (or Completed) - It is either Committed or Aborted (Rolled-back), depending whether the execution is considered a success or not, respectively . When committed, all itsrecoverable (i.e.,
   with states that can be controlled for this purpose), durable resources (typically database data) are put in their final states, states after running. When aborted, all its recoverable resources are put back in their initial states,
   as before running.

A failure in transaction‘s computing environment before ending typically results in its abort. However, a transaction may be aborted also for other reasons as well (e.g., see below).

Upon being ended (completed), transaction‘s allocated computing resources are released and the transaction disappears from the computing environment. However, the effects of a committed transaction remain in the database, while the effects of an aborted (rolled-back)
transaction disappear from the database. The concept of atomic transaction ("all or nothing" semantics) was designed to exactly achieve this behavior, in order to control correctness in complex faulty systems.

Correctness[edit]

Correctness - serializability[edit]

Serializability is a property of a transaction schedule (history).
It relates to the isolation property of a database
transaction.

Serializability of a schedule means equivalence (in the outcome, the database state, data values) to a serial schedule (i.e., sequential with no transaction overlap in time) with the same transactions. It is the major criterion for
the correctness of concurrent transactions‘ schedule, and thus supported in all general purpose database systems.

The rationale behind serializability is the following:

If each transaction is correct by itself, i.e., meets certain integrity conditions, then a schedule that comprises any serial execution of these transactions is correct (its transactions still meet their conditions): "Serial" means that transactions
do not overlap in time and cannot interfere with each other, i.e, complete isolation between each other exists. Any order of the transactions is legitimate, if no dependencies among them exist, which is assumed (see comment below). As a result, a
schedule that comprises any execution (not necessarily serial) that is equivalent (in its outcome) to any serial execution of these transactions, is correct.

Schedules that are not serializable are likely to generate erroneous outcomes. Well known examples are with transactions that debit and credit accounts with money: If the related schedules are not serializable, then the total sum of money may not be preserved.
Money could disappear, or be generated from nowhere. This and violations of possibly needed other invariantpreservations
are caused by one transaction writing, and "stepping on" and erasing what has been written by another transaction before it has become permanent in the database. It does not happen if serializability is maintained.

If any specific order between some transactions is requested by an application, then it is enforced independently of the underlying serializability mechanisms. These mechanisms are typically indifferent to any specific order, and generate some unpredictable partial
order that is typically compatible with multiple serial orders of these transactions. This partial order results from the scheduling orders of concurrent transactions‘ data access operations, which depend on many factors.

A major characteristic of a database transaction is atomicity,
which means that it either commits, i.e., all its operations‘ results take effect in the database, or aborts (rolled-back), all its operations‘ results do not have any effect on the database ("all or nothing" semantics of a transaction).
In all real systems transactions can abort for many reasons, and serializability by itself is not sufficient for correctness. Schedules also need to possess the recoverability (from
abort) property. Recoverability means that committed transactions have not read data written by aborted transactions (whose effects do not exist in the resulting database states). While serializability is currently compromised on purpose in
many applications for better performance (only in cases when application‘s correctness is not harmed), compromising recoverability would quickly violate the database‘s integrity, as well as that of transactions‘ results external to the database. A schedule
with the recoverability property (a recoverable schedule) "recovers" from aborts by itself, i.e., aborts do not harm the integrity of its committed transactions and resulting database. This is false without recoverability, where the likely integrity
violations (resulting incorrect database data) need special, typically manual, corrective actions in the database.

Implementing recoverability in its general form may result in cascading aborts: Aborting one transaction may result in a need to abort a second transaction, and then a third, and so on. This results in a waste of already partially executed transactions,
and may result also in a performance penalty. Avoiding
cascading aborts (ACA, or Cascadelessness) is a special case of recoverability that exactly prevents such phenomenon. Often in practice a special case of ACA is utilized: Strictness.
Strictness allows an efficient database recovery from failure.

Note that the recoverability property is needed even if no database failure occurs and no database recovery from failure is needed. It is rather needed to correctly automatically handle aborts, which may be unrelated to database failure and
recovery from failure.

Relaxing serializability[edit]

In many applications, unlike with finances, absolute correctness is not needed. For example, when retrieving a list of products according to specification, in most cases it does not matter much if a product, whose data was updated a short time ago, does not
appear in the list, even if it meets the specification. It will typically appear in such a list when tried again a short time later. Commercial databases provide concurrency control with a whole range of isolation
levels which are in fact (controlled) serializability violations in order to achieve higher performance. Higher performance means better transaction execution rate and shorter average transaction response time (transaction duration). Snapshot
isolation is an example of a popular, widely utilized efficient relaxed serializability method with many characteristics of full serializability, but still short of some, and unfit in many situations.

Another common reason nowadays for distributed serializability relaxation
(see below) is the requirement of availability of internet products
and services. This requirement is typically answered by large-scale data replication.
The straightforward solution for synchronizing replicas‘ updates of a same database object is including all these updates in a single atomicdistributed
transaction. However, with many replicas such a transaction is very large, and may span several computers and networks that
some of them are likely to be unavailable. Thus such a transaction is likely to end with abort and miss its purpose.^[4] Consequently Optimistic
replication (Lazy replication) is often utilized (e.g., in many products and services by Google, Amazon,Yahoo,
and alike), while serializability is relaxed and compromised for eventual consistency.
Again in this case, relaxation is done only for applications that are not expected to be harmed by this technique.

Classes of schedules defined by relaxed serializability properties either contain the serializability class, or are incomparable with it.

View and conflict serializability[edit]

Mechanisms that enforce serializability need to execute in real time, or almost in real
time, while transactions are running at high rates. In order to meet this requirement special cases of serializability, sufficient conditions for serializability which can be enforced effectively, are utilized.

Two major types of serializability exist: view-serializability, and conflict-serializability. View-serializability matches the general definition of serializability given above. Conflict-serializability is a broad special case, i.e., any schedule
that is conflict-serializable is also view-serializable, but not necessarily the opposite. Conflict-serializability is widely utilized because it is easier to determine and covers a substantial portion of the view-serializable schedules. Determining view-serializability
of a schedule is an NP-complete problem (a class of problems with only difficult-to-compute, excessively
time-consuming known solutions).

View-serializability of a schedule is defined by equivalence to a serial schedule (no overlapping transactions) with the same transactions, such that respective transactions in the two schedules read and write the same data values ("view" the
same data values).

Conflict-serializability is defined by equivalence to a serial schedule (no overlapping transactions) with the same transactions, such that both schedules have the same sets of respective chronologically ordered pairs of conflicting operations
(same precedence relations of respective conflicting operations).

Operations upon data are read or write (a write: either insert or modify or delete). Two operations are conflicting, if they are of different transactions, upon the same datum (data item), and at least one
of them is write. Each such pair of conflicting operations has a conflict type: It is either a read-write, or write-read, or a write-write conflict. The transaction of the second operation in the pair is said to
be in conflict with the transaction of the first operation. A more general definition of conflicting operations (also for complex operations, which may consist each of several "simple" read/write operations) requires that they are noncommutative (changing
their order also changes their combined result). Each such operation needs to be atomic by itself (by proper system support) in order to be considered an operation for a commutativity check. For example, read-read operations are commutative (unlike read-write
and the other possibilities) and thus read-read is not a conflict. Another more complex example: the operations increment and decrement of a counter are both write operations (both modify the counter), but do not need to
be considered conflicting (write-write conflict type) since they are commutative (thus increment-decrement is not a conflict; e.g., already has been supported in the old IBM‘s
IMS "fast path"). Only precedence (time order) in pairs of conflicting (non-commutative) operations is important when checking equivalence to a serial schedule, since different schedules consisting of the same transactions can be transformed from one to
another by changing orders between different transactions‘ operations (different transactions‘ interleaving), and since changing orders of commutative operations (non-conflicting) does not change an overall operation sequence result, i.e., a schedule outcome
(the outcome is preserved through order change between non-conflicting operations, but typically not when conflicting operations change order). This means that if a schedule can be transformed to any serial schedule without changing orders of conflicting operations
(but changing orders of non-conflicting, while preserving operation order inside each transaction), then the outcome of both schedules is the same, and the schedule is conflict-serializable by definition.

Conflicts are the reason for blocking transactions and delays (non-materialized conflicts), or for aborting transactions due to serializability violations prevention. Both possibilities reduce performance. Thus reducing the number of conflicts, e.g., by commutativity
(when possible), is a way to increase performance.

A transaction can issue/request a conflicting operation and be in conflict with another transaction while its conflicting operation is delayed and not executed (e.g., blocked by a lock).
Only executed (materialized) conflicting operations are relevant to conflict serializability (see more below).

Enforcing conflict serializability[edit]

Testing conflict serializability[edit]

Schedule compliance with conflict serializability can be tested with the precedence graph (serializability
graph, serialization graph, conflict graph) for committed transactions of the schedule. It is the directed
graph representing precedence of transactions in the schedule, as reflected by precedence of conflicting operations in the transactions.

In the precedence graph transactions are nodes and precedence relations are
directed edges. There exists an edge from a first transaction to a second transaction, if the second transaction is in conflict with the first (see Conflict serializability above), and the conflict is materialized (i.e., if the requested
conflicting operation is actually executed: in many cases a requested/issued conflicting operation by a transaction is delayed and even never executed, typically by a lock on
the operation‘s object, held by another transaction, or when writing to a transaction‘s temporary private workspace and materializing, copying to the database itself, upon commit; as long as a requested/issued conflicting operation is not executed upon the
database itself, the conflict is non-materialized; non-materialized conflicts are not represented by an edge in the precedence graph).

Comment: In many text books only committed transactions are included in the precedence graph. Here all transactions are included for convenience in later discussions.

The following observation is a key characterization of conflict serializability:

A schedule is conflict-serializable if and only if its precedence graph of committed
transactions (when only committed transactions are considered) is acyclic.
This means that a cycle consisting of committed transactions only is generated in the (general) precedence graph, if and only if conflict-serializability is violated.

Cycles of committed transactions can be prevented by aborting an undecided (neither committed, nor aborted) transaction on each cycle in the precedence graph of all the transactions, which can otherwise turn into a cycle of committed transactions (and
a committed transaction cannot be aborted). One transaction aborted per cycle is both required and sufficient number to break and eliminate the cycle (more aborts are possible, and can happen in some mechanisms, but unnecessary for serializability). The probability
of cycle generation is typically low, but nevertheless, such a situation is carefully handled, typically with a considerable overhead, since correctness is involved. Transactions aborted due to serializability violation prevention arerestarted and
executed again immediately.

Serializability enforcing mechanisms typically do not maintain a precedence graph as a data structure, but rather prevent or break cycles implicitly (e.g., SS2PL below).

Common mechanism - SS2PL[edit]

Main article: Two-phase locking

Strong strict two phase locking (SS2PL) is a common mechanism utilized in database systems since their early days in the 1970s (the "SS" in the name SS2PL is newer though) to enforce both conflict serializability and strictness (a
special case of recoverability which allows effective database recovery from failure) of a schedule. In this mechanism each datum is locked by a transaction before accessing it (any read or write operation): The item is marked by, associated with a lock of
a certain type, depending on operation (and the specific implementation; various models with different lock types exist; in some models locks may change type during the transaction‘s life). As a result access by another transaction may be blocked, typically
upon a conflict (the lock delays or completely prevents the conflict from being materialized and be reflected in the precedence graph by blocking the conflicting operation), depending on lock type and the other transaction‘s access operation type. Employing
an SS2PL mechanism means that all locks on data on behalf of a transaction are released only after the transaction has ended (either committed or aborted).

SS2PL is the name of the resulting schedule property as well, which is also called rigorousness. SS2PL is a special case (proper
subset) of Two-phase locking (2PL)

Mutual blocking between transactions results in a deadlock, where execution of these transactions is stalled, and no completion can be reached. Thus deadlocks need to be resolved to complete these transactions‘ execution and release related computing
resources. A deadlock is a reflection of a potential cycle in the precedence graph, that would occur without the blocking when conflicts are materialized. A deadlock is resolved by aborting a transaction involved with such potential cycle, and breaking the
cycle. It is often detected using a wait-for graph (a graph of conflicts blocked by
locks from being materialized; it can be also defined as the graph of non-materialized conflicts; conflicts not materialized are not reflected in the precedence graph and do not affect serializability), which indicates which transaction is "waiting for" lock
release by which transaction, and a cycle means a deadlock. Aborting one transaction per cycle is sufficient to break the cycle. Transactions aborted due to deadlock resolution are restarted and executed again immediately.

Other enforcing techniques[edit]

Other known mechanisms include:

• Precedence graph (or Serializability graph, Conflict graph)
  cycle elimination
• Two-phase locking (2PL)
• Timestamp ordering (TO)
• Serializable snapshot
  isolation^[5] (SerializableSI)

The above (conflict) serializability techniques in their general form do not provide recoverability. Special enhancements are needed for adding recoverability.

Optimistic versus pessimistic techniques[edit]

Concurrency control techniques are of three major types:

1. Pessimistic: In Pessimistic concurrency control a transaction blocks data access operations of other transactions upon conflicts, and conflicts are non-materialized until blocking is removed. This is done to
   ensure that operations that may violate serializability (and in practice also recoverability) do not occur.
2. Optimistic: In Optimistic
   concurrency control data access operations of other transactions are not blocked upon conflicts, and conflicts are immediately materialized. When the transaction reaches the ready state, i.e., its running state has been completed,
   possible serializability (and in practice also recoverability) violation by the transaction‘s operations (relatively to other running transactions) is checked: If violation has occurred, the transaction is typically aborted (sometimes aborting another transaction
   to handle serializability violation is preferred). Otherwise it is committed.
3. Semi-optimistic: Mechanisms that mix blocking in certain situations with not blocking in other situations and employ both materialized and non-materialized conflicts

The main differences between the technique types is the conflict types that are generated by them. A pessimistic method blocks a transaction operation upon conflict and generates a non-materialized conflict, while an optimistic method does not block and generates
a materialized conflict. A semi-optimistic method generates both conflict types. Both conflict types are generated by the chronological orders in which transaction operations are invoked, independently of the type of conflict. A cycle of committed transactions
(with materialized conflicts) in the precedence graph (conflict graph) represents
a serializability violation, and should be avoided for maintaining serializability. A cycle of (non-materialized) conflicts in the wait-for
graph represents a deadlock situation, which should be resolved by breaking the cycle. Both cycle types result from conflicts, and should be broken. At any technique type conflicts should be detected and considered, with similar overhead for both
materialized and non-materialized conflicts (typically by using mechanisms like locking, while either blocking for locks, or not blocking but recording conflict for materialized conflicts). In a blocking method typically a context
switching occurs upon conflict, with (additional) incurred overhead. Otherwise blocked transactions‘ related computing resources remain idle, unutilized, which may be a worse alternative. When conflicts do not occur frequently, optimistic methods typically
have an advantage. With different transactions loads (mixes of transaction types) one technique type (i.e., either optimistic or pessimistic) may provide better performance than the other.

Unless schedule classes are inherently blocking (i.e., they cannot be implemented without data-access operations blocking; e.g., 2PL, SS2PL and SCO above; see chart), they can be implemented also using optimistic techniques (e.g., Serializability,
Recoverability).

Serializable multi-version concurrency control[edit]

See also Multiversion concurrency control (partial coverage)

and Serializable_Snapshot_Isolation in Snapshot
isolation

Multi-version concurrency control (MVCC) is a common way today to increase concurrency and performance by generating a new version of a database object each time the object is written, and allowing transactions‘ read operations of several last
relevant versions (of each object), depending on scheduling method. MVCC can be combined with all the serializability techniques listed above (except SerializableSI which is originally MVCC based). It is utilized in most general-purpose DBMS products.

MVCC is especially popular nowadays through the relaxed serializability (see above) method Snapshot
isolation (SI) which provides better performance than most known serializability mechanisms (at the cost of possible serializability violation in certain cases). SerializableSI,
which is an efficient enhancement of SI to make it serializable, is intended to provide an efficient serializable solution. SerializableSI
has been analyzed^[5][6] via
a general theory of MVCC

Distributed serializability[edit]

Overview[edit]

Distributed serializability is the serializability of a schedule of a transactional distributed
system (e.g., a distributed database system). Such system is characterized by distributed
transactions (also called global transactions), i.e., transactions that span computer processes (a process abstraction in a general sense, depending on computing environment; e.g.,operating
system‘s thread) and possibly network nodes. A
distributed transaction comprises more than one local sub-transactions that each has states as described above for a database
transaction. A local sub-transaction comprises a single process, or more processes that typically fail together (e.g., in a single processor
core). Distributed transactions imply a need in Atomic commit protocol to reach consensus among
its local sub-transactions on whether to commit or abort. Such protocols can vary from a simple (one-phase) hand-shake among processes that fail together, to more sophisticated protocols, like Two-phase
commit, to handle more complicated cases of failure (e.g., process, node, communication, etc. failure). Distributed serializability is a major goal of distributed
concurrency control for correctness. With the proliferation of the Internet, Cloud
computing, Grid computing, and small, portable, powerful computing devices (e.g.,smartphones)
the need for effective distributed serializability techniques to ensure correctness in and among distributed applications seems to increase.

Distributed serializability is achieved by implementing distributed versions of the known centralized techniques.^[1][2] Typically
all such distributed versions require utilizing conflict information (either of materialized or non-materialized conflicts, or equivalently, transaction precedence or blocking information; conflict serializability is usually utilized) that is not generated
locally, but rather in different processes, and remote locations. Thus information distribution is needed (e.g., precedence relations, lock information, timestamps, or tickets). When the distributed system is of a relatively small scale, and message delays
across the system are small, the centralized concurrency control methods can be used unchanged, while certain processes or nodes in the system manage the related algorithms. However, in a large-scale system (e.g., Grid and Cloud), due to
the distribution of such information, substantial performance penalty is typically incurred, even when distributed versions of the methods (Vs. centralized) are used, primarily due to computer and communication latency.
Also, when such information is distributed, related techniques typically do not scale well. A well-known example with scalability problems is a distributed
lock manager, which distributes lock (non-materialized conflict) information across the distributed system to implement locking techniques.

See also[edit]

• Strong strict two-phase locking (SS2PL or Rigorousness).
• Making snapshot isolation
  serializable^[5] in Snapshot
  isolation.
• Global serializability, where the Global serializability
  problem and its proposed solutions are described.
• Linearizability, a more general concept in concurrent
  computing