nagios 监控 nginx

开启防火墙161端口

252.10760.195.252.110

iptables -I INPUT -p udp -s 60.195.252.107 –dport 161 -j ACCEPT

iptables -I INPUT -p udp -s 60.195.252.110 –dport 161 -j ACCEPT

2012-03-21 23:07:38|  分类： 监控 |举报|字号 订阅

1.在被控端执行操作：把check_nginx插件放进/usr/local/nagios/libexec,并且授权属主和属组为nagios（这点非常关键）

[[email protected] libexec]# ll check_nginx

-rwxr-xr-x 1 nagios nagios 7636 Oct 23 22:48 check_nginx

2.vi /usr/local/nagios/etc/nrpe.cfg

添加这行：command[check_nginx]=/usr/local/nagios/libexec/check_nginx -w 15000 -c 20000

3.重启Nrpe:

killall -9 nrpe

/usr/local/nagios/bin/nrpe -c /usr/local/nagios/etc/nrpe.cfg -d

4.被控端执行操作测试：

[[email protected] libexec]# ./check_nginx -H 192.168.0.100 -P 80 -p /var/run/ -n nginx.pid -s nginx_status -o /tmp/ -w 15000 -c 20000

OK - nginx is running. 1 requests per second, 1 connections per second (1.00 requests per connection) | ‘reqpsec‘=1 ‘conpsec‘=1 ‘conpreq‘=1.00 ]

--------------------------------------------------------------------------------------------------------------------------------------------------

下面在Nagios Server端操作：

1.vi /usr/local/nagios/etc/objects/service.cfg

添加：

define service{

use generic-service

host_name Nagios-server,Nagios-client

service_description check_nginx

check_command check_nrpe!check_nginx

max_check_attempts 3

normal_check_interval 3

retry_check_interval 3

check_period 24x7

notification_interval 5

notification_period 24x7

notification_options w,u,c,r

contact_groups admins

process_perf_data 1

action_url /nagios/pnp/index.php?host=$HOSTNAME$&srv=$SERVICEDESC$

}

添加完，保存退出，重启Nagios即可。

/etc/init.d/nagios relaod

/etc/init.d/nagios restart

2.测试：/usr/local/nagios/libexec/check_nrpe -H 192.168.0.100 -c check_nginx

OK - nginx is running. 1 requests per second, 1 connections per second (1.00 requests per connection) | ‘reqpsec‘=1 ‘conpsec‘=1 ‘conpreq‘=1.00 ]

#---------------------192.168.0.100是我被控端的ip地址------------------------------------------------------

下面是一些注意的地方--

1、关于nginx.pid

--在nginx.conf一定要加上,如:pid    /opt/nginx.pid

2、如果出现以下提示.

--UNKNOWN - Local copy/copies of nginx_status is empty.

--可能就是在你的nginx.conf没有配置状态监控,如

server

{

listen  80;

server_name  IP | 域名;

location /nginx_status {

stub_status on;

access_log   off;

}

}

3.需要更改check_nginx 一个地方：

把hostname="localhost"改为：你需要监控的主机ip。

如：hostname="192.168.0.100"

check_nginx 脚本

#!/bin/sh

PROGNAME=`basename $0`

VERSION="Version 1.0,"

AUTHOR="2009, Mike Adolphs (http://www.matejunkie.com/)"

ST_OK=0

ST_WR=1

ST_CR=2

ST_UK=3

hostname="192.168.0.100"

port=80

path_pid=/var/run

name_pid="nginx.pid"

status_page="nginx_status"

output_dir=/tmp

pid_check=1

secure=0

print_version() {

echo "$VERSION $AUTHOR"

}

print_help() {

print_version $PROGNAME $VERSION

echo ""

echo "$PROGNAME is a Nagios plugin to check whether nginx is running."

echo "It also parses the nginx‘s status page to get requests and"

echo "connections per second as well as requests per connection. You"

echo "may have to alter your nginx configuration so that the plugin"

echo "can access the server‘s status page."

echo "The plugin is highly configurable for this reason. See below for"

echo "available options."

echo ""

echo "$PROGNAME -H localhost -P 80 -p /var/run -n nginx.pid "

echo "  -s nginx_statut -o /tmp [-w INT] [-c INT] [-S] [-N]"

echo ""

echo "Options:"

echo "  -H/--hostname)"

echo "     Defines the hostname. Default is: localhost"

echo "  -P/--port)"

echo "     Defines the port. Default is: 80"

echo "  -p/--path-pid)"

echo "     Path where nginx‘s pid file is being stored. You might need"

echo "     to alter this path according to your distribution. Default"

echo "     is: /var/run"

echo "  -n/--name_pid)"

echo "     Name of the pid file. Default is: nginx.pid"

echo "  -N/--no-pid-check)"

echo "     Turn this on, if you don‘t want to check for a pid file"

echo "     whether nginx is running, e.g. when you‘re checking a"

echo "     remote server. Default is: off"

echo "  -s/--status-page)"

echo "     Name of the server‘s status page defined in the location"

echo "     directive of your nginx configuration. Default is:"

echo "     nginx_status"

echo "  -o/--output-directory)"

echo "     Specifies where to write the tmp-file that the check creates."

echo "     Default is: /tmp"

echo "  -S/--secure)"

echo "     In case your server is only reachable via SSL, use this"

echo "     this switch to use HTTPS instead of HTTP. Default is: off"

echo "  -w/--warning)"

echo "     Sets a warning level for requests per second. Default is: off"

echo "  -c/--critical)"

echo "     Sets a critical level for requests per second. Default is:"

echo "     off"

exit $ST_UK

}

while test -n "$1"; do

case "$1" in

-help|-h)

print_help

exit $ST_UK

;;

--version|-v)

print_version $PROGNAME $VERSION

exit $ST_UK

;;

--hostname|-H)

hostname=$2

shift

;;

--port|-P)

port=$2

shift

;;

--path-pid|-p)

path_pid=$2

shift

;;

--name-pid|-n)

name_pid=$2

shift

;;

--no-pid-check|-N)

pid_check=0

;;

--status-page|-s)

status_page=$2

shift

;;

--output-directory|-o)

output_dir=$2

shift

;;

--secure|-S)

secure=1

;;

--warning|-w)

warning=$2

shift

;;

--critical|-c)

critical=$2

shift

;;

*)

echo "Unknown argument: $1"

print_help

exit $ST_UK

;;

esac

shift

done

get_wcdiff() {

if [ ! -z "$warning" -a ! -z "$critical" ]

then

wclvls=1

if [ ${warning} -gt ${critical} ]

then

wcdiff=1

fi

elif [ ! -z "$warning" -a -z "$critical" ]

then

wcdiff=2

elif [ -z "$warning" -a ! -z "$critical" ]

then

wcdiff=3

fi

}

val_wcdiff() {

if [ "$wcdiff" = 1 ]

then

echo "Please adjust your warning/critical thresholds. The warning \

must be lower than the critical level!"

exit $ST_UK

elif [ "$wcdiff" = 2 ]

then

echo "Please also set a critical value when you want to use \

warning/critical thresholds!"

exit $ST_UK

elif [ "$wcdiff" = 3 ]

then

echo "Please also set a warning value when you want to use \

warning/critical thresholds!"

exit $ST_UK

fi

}

check_pid() {

if [ -f "$path_pid/$name_pid" ]

then

retval=0

else

retval=1

fi

}

get_status() {

if [ "$secure" = 1 ]

then

wget --no-check-certificate -q -t 3 -T 3 \

http://${hostname}:${port}/${status_page} -O ${output_dir}/nginx-status.1

sleep 1

wget --no-check-certificate -q -t 3 -T 3 \

http://${hostname}:${port}/${status_page} -O ${output_dir}/nginx-status.2

else

wget -q -t 3 -T 3 http://${hostname}:${port}/${status_page} \

-O ${output_dir}/nginx-status.1

sleep 1

wget -q -t 3 -T 3 http://${hostname}:${port}/${status_page} \

-O ${output_dir}/nginx-status.2

fi

stat_output1=`stat -c %s ${output_dir}/nginx-status.1`

stat_output2=`stat -c %s ${output_dir}/nginx-status.2`

if [ "$stat_output1" = 0 -o "$stat_output2" = 0 ]

then

echo "UNKNOWN - Local copy/copies of $status_page is empty."

exit $ST_UK

fi

}

get_vals() {

tmp1_reqpsec=`grep ‘^ ‘ ${output_dir}/nginx-status.1|awk ‘{print $3}‘`

tmp2_reqpsec=`grep ‘^ ‘ ${output_dir}/nginx-status.2|awk ‘{print $3}‘`

reqpsec=`expr $tmp2_reqpsec - $tmp1_reqpsec`

tmp1_conpsec=`grep ‘^ ‘ ${output_dir}/nginx-status.1|awk ‘{print $2}‘`

tmp2_conpsec=`grep ‘^ ‘ ${output_dir}/nginx-status.2|awk ‘{print $2}‘`

conpsec=`expr $tmp2_conpsec - $tmp1_conpsec`

reqpcon=`echo "scale=2; $reqpsec / $conpsec" | bc -l`

if [ "$reqpcon" = ".99" ]

then

reqpcon="1.00"

fi

}

do_output() {

output="nginx is running. $reqpsec requests per second, $conpsec \

connections per second ($reqpcon requests per connection)"

}

do_perfdata() {

perfdata="‘reqpsec‘=$reqpsec ‘conpsec‘=$conpsec ‘conpreq‘=$reqpcon"

}

# Here we go!

get_wcdiff

val_wcdiff

if [ ${pid_check} = 1 ]

then

check_pid

if [ "$retval" = 1 ]

then

echo "There‘s no pid file for nginx. Is nginx running? Please \

also make sure whether your pid path and name is correct."

exit $ST_CR

fi

fi

get_status

get_vals

do_output

do_perfdata

if [ -n "$warning" -a -n "$critical" ]

then

if [ "$reqpsec" -ge "$warning" -a "$reqpsec" -lt "$critical" ]

then

echo "WARNING - ${output} | ${perfdata}"

exit $ST_WR

elif [ "$reqpsec" -ge "$critical" ]

then

echo "CRITICAL - ${output} | ${perfdata}"

exit $ST_CR

else

echo "OK - ${output} | ${perfdata} ]"

exit $ST_OK

fi

else

echo "OK - ${output} | ${perfdata}"

exit $ST_OK

fi

时间： 2024-12-23 10:12:48

nagios 监控 nginx的相关文章

Nagios监控nginx服务详细过程

1在nginx 服务器上安装nrpe客户端: Nginx的服务需要监控起来,不然万一down了而不及时修复,会影响web应用,如下web应用上面启动的nginx后台进程[[email protected] ~]# ps aux|grep nginxnobody   15294  0.0  0.0  22432  3464 ?        S    Jul03   0:05 nginx: worker process      nobody   15295  0.0  0.0  22432  3

Nagios监控nginx服务具体过程

1在nginx 服务器上安装nrpe客户端: Nginx的服务须要监控起来.不然万一down了而不及时修复,会影响web应用.例如以下web应用上面启动的nginx后台进程[[email protected] ~]# ps aux|grep nginxnobody   15294  0.0  0.0  22432  3464 ?        S    Jul03   0:05 nginx: worker process      nobody   15295  0.0  0.0  22432

Nagios 监控Nginx和php-fpm

线上用的是Nagios监控,版本是4.0.8 Nginx用的是Tengine最新版,PHP是5.5版本 Nginx插件下载地址 https://exchange.nagios.org/directory/Plugins/Web-Servers/nginx/check_nginx_status-2Epl/details PHP-FPM插件下载地址 https://github.com/regilero/check_phpfpm_status 解压里面的文件 得到2个文件 check_nginx_s

python——nagios监控nginx日志 request_time

遇到问题:nginx日志包含非常重要的信息.比如upstream_response_time 和request_time.现需求监控改值. 解决问题:编写python脚本,通过nagios check_nrpe 插件完成监控. 前提了解: nginx日志格式: log_format  main  '$remote_addr |$time_local| $request | $status | $body_byte s_sent | $http_referer | $http_user_agent

nagios监控nginx状态

1.服务器与被监控主机安装组件 yum install bc 编译安装nrpe(参考教程:http://2860664.blog.51cto.com/2850664/1559056) 以下为被监控主机设置 2.下载监控脚本 check_nginx.sh,并上传到被监控主机的 /usr/local/nagios/libexec目录 下载地址:http://exchange.nagios.org/components/com_mtree/attachment.php?link_id=622&cf_i

nagios监控nginx状态（check_nginx_status.pl）

1.安装所需组件 yum install perl perl-devel perl-CPAN bc -y perl -MCPAN -eshell  & cpan> install Bundle::LWP 编译安装nrpe(参考教程:http://2860664.blog.51cto.com/2850664/1559056) 以下是被监控端设置 2.下载check_nginx_status.pl脚本 下载地址:https://codeload.github.com/regilero/check

nagios监控实用教程

nagios监控实用教程 Nagios作为开源网络监视工具,它不但可以有效的监控内存.流量.数据库使用情况.它还可以Windows.Linux主机状态.本专题收录了有关Nagios监控相关文章,供大家参考学习. 标签:nagios nagios监控 监控工具 阅读量:26196收藏量:8 文章标题 阅读评论 作者 nagios网卡流量监控 trffic.sh 51/0 anyue0072017-04-26 nagios搭建(二):nagios监控windows主机 1203/0 fantefei

Nginx下搭建Nagios监控平台(转载)

Nagios依赖PHP环境和perl环境,由于Nginx不支持Perl的CGI,需先来搭建Perl环境,Nagios原理介绍略. 文章原出处:https://blog.linuxeye.com/312.html1.下载最新稳定源码包和Perl脚本 mkdir nagios-cacti cd nagios-cacti wget http://www.cpan.org/modules/by-module/FCGI/FCGI-0.74.tar.gz wget http://www.cpan.org/a

ngxtop：在命令行实时监控 Nginx 的神器

Nginx网站服务器在生产环境中运行的时候需要进行实时监控.实际上,诸如Nagios, Zabbix, Munin 的网络监控软件是支持 Nginx 监控的. 如果你不需要以上软件提供的综合性报告或者长期数据统计功能,只是需要一种快速简便的办法去监控 Nginx 服务器的请求的话,我建议你采用一个叫 ngxtop 的命令行工具. 你马上就会发现 ngxtop 从界面和名称都借鉴了著名的top命令.ngxtop 是通过分析 Nginx 或者其他的日志文件,使用类似 top 命令的界面实时展示出来的