FastDFS_Tracker.conf示例配置
# is this config file disabled # false for enabled # true for disabled disabled = false # bind an address of this host # empty for bind all addresses of this host bind_addr = # the tracker server port port = 22122 # connect timeout in seconds # default value is 30 # Note: in the intranet network (LAN), 2 seconds is enough. connect_timeout = 5 # network timeout in seconds for send and recv # default value is 30 network_timeout = 60 # the base path to store data and log files # base_path = /home/yuqing/fastdfs base_path=/opt/fastdfs/tracker # max concurrent connections this server support # you should set this parameter larger, eg. 10240 # default value is 256 max_connections = 1024 # accept thread count # default value is 1 which is recommended # since V4.07 accept_threads = 1 # work thread count # work threads to deal network io # default value is 4 # since V2.00 work_threads = 4 # the min network buff size # default value 8KB min_buff_size = 8KB # the max network buff size # default value 128KB max_buff_size = 128KB # the method for selecting group to upload files # 0: round robin # 1: specify group # 2: load balance, select the max free space group to upload file store_lookup = 2 # which group to upload file # when store_lookup set to 1, must set store_group to the group name store_group = group2 # which storage server to upload file # 0: round robin (default) # 1: the first server order by ip address # 2: the first server order by priority (the minimal) # Note: if use_trunk_file set to true, must set store_server to 1 or 2 store_server = 0 # which path (means disk or mount point) of the storage server to upload file # 0: round robin # 2: load balance, select the max free space path to upload file store_path = 0 # which storage server to download file # 0: round robin (default) # 1: the source storage server which the current file uploaded to download_server = 0 # reserved storage space for system or other applications. # if the free(available) space of any stoarge server in # a group <= reserved_storage_space, no file can be uploaded to this group. # bytes unit can be one of follows: ### G or g for gigabyte(GB) ### M or m for megabyte(MB) ### K or k for kilobyte(KB) ### no unit for byte(B) ### XX.XX% as ratio such as: reserved_storage_space = 10% reserved_storage_space = 20% #standard log level as syslog, case insensitive, value list: ### emerg for emergency ### alert ### crit for critical ### error ### warn for warning ### notice ### info ### debug log_level = info #unix group name to run this program, #not set (empty) means run by the group of current user run_by_group= #unix username to run this program, #not set (empty) means run by current user run_by_user = # allow_hosts can ocur more than once, host can be hostname or ip address, # "*" (only one asterisk) means match all ip addresses # we can use CIDR ips like 192.168.5.64/26 # and also use range like these: 10.0.1.[0-254] and host[01-08,20-25].domain.com # for example: # allow_hosts=10.0.1.[1-15,20] # allow_hosts=host[01-08,20-25].domain.com # allow_hosts=192.168.5.64/26 allow_hosts = * # sync log buff to disk every interval seconds # default value is 10 seconds sync_log_buff_interval = 1 # check storage server alive interval seconds check_active_interval = 120 # thread stack size, should >= 64KB # default value is 256KB thread_stack_size = 256KB # auto adjust when the ip address of the storage server changed # default value is true storage_ip_changed_auto_adjust = true # storage sync file max delay seconds # default value is 86400 seconds (one day) # since V2.00 storage_sync_file_max_delay = 86400 # the max time of storage sync a file # default value is 300 seconds # since V2.00 storage_sync_file_max_time = 300 # if use a trunk file to store several small files # default value is false # since V3.00 use_trunk_file = false # the min slot size, should <= 4KB # default value is 256 bytes # since V3.00 slot_min_size = 256 # the max slot size, should > slot_min_size # store the upload file to trunk file when it‘s size <= this value # default value is 16MB # since V3.00 slot_max_size = 4MB # the trunk file size, should >= 4MB # default value is 64MB # since V3.00 trunk_file_size = 64MB # if create trunk file advancely # default value is false # since V3.06 trunk_create_file_advance = false # the time base to create trunk file # the time format: HH:MM # default value is 02:00 # since V3.06 trunk_create_file_time_base = 02:00 # the interval of create trunk file, unit: second # default value is 38400 (one day) # since V3.06 trunk_create_file_interval = 86400 # the threshold to create trunk file # when the free trunk file size less than the threshold, # will create he trunk files # default value is 0 # since V3.06 trunk_create_file_space_threshold = 20G # if check trunk space occupying when loading trunk free spaces # the occupied spaces will be ignored # default value is false # since V3.09 # NOTICE: set this parameter to true will slow the loading of trunk spaces # when startup. you should set this parameter to true when neccessary. trunk_init_check_occupying = false # if ignore storage_trunk.dat, reload from trunk binlog # default value is false # since V3.10 # set to true once for version upgrade when your version less than V3.10 trunk_init_reload_from_binlog = false # the min interval for compressing the trunk binlog file # unit: second, 0 means never compress # FastDFS compress the trunk binlog when trunk init and trunk destroy # recommand to set this parameter to 86400 (one day) # default value is 0 # since V5.01 trunk_compress_binlog_min_interval = 86400 # the interval for compressing the trunk binlog file # unit: second, 0 means never compress # recommand to set this parameter to 86400 (one day) # default value is 0 # since V6.05 trunk_compress_binlog_interval = 86400 # compress the trunk binlog time base, time format: Hour:Minute # Hour from 0 to 23, Minute from 0 to 59 # default value is 03:00 # since V6.05 trunk_compress_binlog_time_base = 03:00 # if use storage server ID instead of IP address # if you want to use dual IPs for storage server, you MUST set # this parameter to true, and configure the dual IPs in the file # configured by following item "storage_ids_filename", such as storage_ids.conf # default value is false # since V4.00 use_storage_id = false # specify storage ids filename, can use relative or absolute path # this parameter is valid only when use_storage_id set to true # since V4.00 storage_ids_filename = storage_ids.conf # id type of the storage server in the filename, values are: ## ip: the ip address of the storage server ## id: the server id of the storage server # this paramter is valid only when use_storage_id set to true # default value is ip # since V4.03 id_type_in_filename = id # if store slave file use symbol link # default value is false # since V4.01 store_slave_file_use_link = false # if rotate the error log every day # default value is false # since V4.02 rotate_error_log = false # rotate error log time base, time format: Hour:Minute # Hour from 0 to 23, Minute from 0 to 59 # default value is 00:00 # since V4.02 error_log_rotate_time = 00:00 # if compress the old error log by gzip # default value is false # since V6.04 compress_old_error_log = false # compress the error log days before # default value is 1 # since V6.04 compress_error_log_days_before = 7 # rotate error log when the log file exceeds this size # 0 means never rotates log file by log file size # default value is 0 # since V4.02 rotate_error_log_size = 0 # keep days of the log files # 0 means do not delete old log files # default value is 0 log_file_keep_days = 0 # if use connection pool # default value is false # since V4.05 use_connection_pool = true # connections whose the idle time exceeds this time will be closed # unit: second # default value is 3600 # since V4.05 connection_pool_max_idle_time = 3600 # HTTP port on this tracker server # http.server_port = 8080 http.server_port=9100 # check storage HTTP server alive interval seconds # <= 0 for never check # default value is 30 http.check_alive_interval = 30 # check storage HTTP server alive type, values are: # tcp : connect to the storge server with HTTP port only, # do not request and get response # http: storage check alive url must return http status 200 # default value is tcp http.check_alive_type = tcp # check storage HTTP server alive uri/url # NOTE: storage embed HTTP server support uri: /status.html http.check_alive_uri = /status.html
原文地址：https://www.cnblogs.com/oumi/p/12057035.html
时间： 2024-08-30 16:24:06