TCP 、UDP网络编程作业代写、代写C 语言 TCP程序
Network Programming using C
Overview
? This homework is due by 11:59:59 PM on Thursday, April 26, 2018.
? This homework will count as 8% of your final course grade.
? This homework is to be completed individually. Do not share your code with anyone else.
? You must use C for this homework assignment, and your code must successfully compile
via gcc with absolutely no warning messages when the -Wall (i.e., warn all) compiler option
is used. We will also use -Werror, which will treat all warnings as critical errors.
? Your code must successfully compile and run on Submitty, which uses Ubuntu v16.04.3 LTS.
Note that the gcc compiler is version 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.5).
? If you decide to use a multi-threaded approach, to compile your code, use -pthread to include
the Pthread library.
Homework Specifications
In this fourth and final homework assignment, you will use C to write server code to implement
a chat server using sockets. Clients will be able to send and receive short text messages from one
another. Further, clients will also be able to send and receive files, including both text and binary
files (e.g., images). Note that all communication between clients must be sent via your server.
Clients communicate with your server via TCP or UDP. For TCP, clients connect via a specific TCP
port number (i.e., the listener port); this TCP port number is the first command-line argument to
your server. For UDP, clients send datagram(s) to a specific UDP port number; this UDP port
number is the second command-line argument to your server (and could be the same port number
as the TCP listener).
Your server must not be a single-threaded iterative server. Instead, your server must use either
multiple threads or multiple child processes to handle TCP connections. Your choice! Further, to
support both TCP and UDP at the same time, you must use the select() system call to poll for
incoming TCP connections and UDP datagrams.
As with previous assignments, your server must be parallelized to the extent possible. As such, be
sure you handle all potential synchronization issues.
Note that your server must support clients implemented in any language (e.g., Java, C, Python,
Fortran, etc.); therefore, only handle streams of bytes as opposed to language-specific structures.
And though you will only submit your server code for this assignment, plan to create one or more
test clients. Test clients will not be provided, but feel free to share test clients with others via
Piazza. Also note that you should use netcat to test your server; do not use telnet.
Supporting TCP and UDP
To provide flexibility to clients, clients can either establish a connection via TCP or simply
send/receive datagrams via UDP. Your server must support at least 32 concurrently connected
clients (i.e., TCP connections, with each connection corresponding to a child thread or a child
process). Overall, your server must support at least 64 active users at any given time.
For TCP, use a dedicated child process or child thread to handle each TCP connection. In other
words, after the accept() call, immediately create a child process or child thread to handle that
connection, thereby enabling the parent process or thread to loop back around and call select()
again.
Since UDP is connectionless, for UDP, use an iterative approach (i.e., handle incoming UDP datagrams
in the parent process or main thread, then loop back around to the select() system call).
Application-Layer Protocol
The application-layer protocol between client and server is a line-based protocol. Streams of bytes
(i.e., characters) are transmitted between clients and your server. Note that all commands are
specified in upper-case and end with a newline (‘\n‘) character. In general, when the server
receives a request, it responds with either a three-byte “OK\n” response or an error. When an error
occurs, the server must respond with:
ERROR <error-message>\n
For any error message not specified below, use a short human-readable description matching the
simple format shown above. Expect clients to display these error messages directly to users.
LOGIN
Regardless of whether a client uses TCP or UDP, a user must first log in (though authentication is
not required). A user identifies itself as follows:
LOGIN <userid>
Note that a valid <userid> is a string of alphanumeric characters with a length in the range [3,20].
Upon receiving a LOGIN request, if successful, the server responds by sending the three-byte “OK\n”
string. If instead the given <userid> is already connected via TCP, the server responds with an
<error-message> of “Already connected” (only for TCP). Otherwise, if <userid> is invalid, the
server responds with an <error-message> of “Invalid userid” (for TCP and UDP).
2
WHO
A user may send a WHO request to obtain a list of all users currently active within the chat server.
When your server receives this request, in addition to sending “OK\n” to the client, the response
should consist of an ASCII-based sorted list of all users, with users delimited by newline (‘\n‘)
characters.
As an example, the server may respond with the following:
OK\nMorty\nRick\nShirley\nemacs\vi\n
LOGOUT
A user may send a LOGOUT request to ensure the server marks the user as being completely logged
out and inactive. Note that this is recommended but not required for TCP, since the client can
simply close its connection to indicate it is logging out.
For UDP, if a LOGOUT is not sent, the given user is assumed to still be logged in until a new LOGIN
request is received for that given user.
When a LOGOUT command is sent, the server is required to send an “OK\n” response.
SEND
A user may attempt to send a private message to another user via the SEND command. The required
format of the SEND command is as follows:
SEND <recipient-userid> <msglen> <message>
To be a valid SEND request, the <recipient-userid> must be a currently active user and the
<msglen> (i.e., length of the <message> portion) must be an integer in the range [1,994].
Note that the <message> can contain any bytes whatsoever. You may assume that the number of
bytes will always match the given <msglen> value.
If the request is valid, the server responds by sending an “OK\n” response. Further, the server
attempts to send the message to the <recipient-userid> by sending either a datagram (UDP) or
packet (TCP) using the following format:
FROM <sender-userid> <msglen> <message>
If the request is invalid, send the appropriate error message from among the following:
? “Unknown userid”
? “Invalid msglen”
? “Invalid SEND format”
3
BROADCAST
If a user wishes to send a message to all active users, the BROADCAST command can be used. The
format of this command is as follows:
BROADCAST <msglen> <message>
The <msglen> and <message> parameters match that of the SEND command above.
SHARE
If a user wishes to share a file with another user, the SHARE command is sent by the client by first
sending the command request as follows:
SHARE <recipient-userid> <filelen>
After receiving the “OK\n” response, the client sends the file (of length <filelen> byte) in 1024-byte
chunks (i.e., send() or sendto() calls using a 1024-byte buffer). Each chunk must be acknowledged
by the server with a three-byte “OK\n” response. And only the last chunk sent can be less than
1024 bytes.
The server subsequently sends the SHARE command to the <recipient-userid> in the same manner,
though the recipient client does not send acknowledgement “OK\n” messages back to the
server. Further, as with the SEND command, the format of the SHARE command sent to the
<recipient-userid> is as follows:
SHARE <sender-userid> <filelen>
Note that the SHARE command is only available if both users (i.e., sender and recipient) are connected
via TCP. If this is not the case, send the appropriate error message from among the following:
? “SHARE not supported over UDP”
? “SHARE not supported because recipient is using UDP”
Text versus Binary Files
All regular files must be supported, meaning that both text and binary (e.g., image) files must be
supported. To achieve this, be sure you do not assume that files consist of strings; in other words,
do not use string functions that rely on the ‘\0‘ character. Instead, rely on specific byte counts.
As noted above, you can assume that the correct number of bytes will be sent and received by
client and server. In practice, this is not a safe assumption, but it should greatly simplify your
implementation.
4
Required Output
Your server is required to output one or more lines describing each request that it receives. Required
output is illustrated in the example below.
Since you are required to use either child processes or child threads, the child IDs shown in the
examples are either thread IDs or process IDs. And as per usual, output lines may be interleaved
as multiple clients interact with the server simultaneously.
bash$ ./a.out 9876 9889
MAIN: Started server
MAIN: Listening for TCP connections on port: 9876
MAIN: Listening for UDP datagrams on port: 9889
...
MAIN: Rcvd incoming UDP datagram from: <client-IP-address>
MAIN: Rcvd LOGIN request for userid Rick
...
MAIN: Rcvd incoming TCP connection from: <client-IP-address>
CHILD 13455: Rcvd LOGIN request for userid Morty
CHILD 13455: Rcvd WHO request
CHILD 13455: Rcvd SEND request to userid Rick
CHILD 13455: Rcvd SEND request to userid Summer
CHILD 13455: Sent ERROR (Unknown userid)
CHILD 13455: Rcvd WHO request
CHILD 13455: Rcvd SHARE request
CHILD 13455: Rcvd LOGOUT request
CHILD 13455: Client disconnected
...
MAIN: Rcvd incoming TCP connection from: <client-IP-address>
CHILD 19232: Rcvd LOGIN request for userid Rick
CHILD 19232: Rcvd WHO request
CHILD 19232: Rcvd SEND request to userid Rick
CHILD 19232: Rcvd SEND request to userid Rick
CHILD 19232: Rcvd SEND request to userid Morty
MAIN: Rcvd incoming UDP datagram from: <client-IP-address>
MAIN: Rcvd LOGIN request for userid Rick
MAIN: Sent ERROR (Already connected)
CHILD 19232: Rcvd SEND request to userid Morty
CHILD 19232: Rcvd BROADCAST request
CHILD 19232: Client disconnected
...
Note that the required output above certainly differs from the specific data sent and received via the
application-layer protocol. On Submitty, test clients will connect to your server and test whether
you have correctly implemented all aspects of the application-layer protocol.
5
Handling System Call Errors
In general, if a system call fails, use perror() to display the appropriate error message on stderr,
then exit the program and return EXIT_FAILURE. If a system or library call does not set the
global errno, use fprintf() instead of perror() to write an error message to stderr. See the
various examples on the course website and corresponding man pages.
Error messages must be one line only and use one of the appropriate formats shown below:
MAIN: ERROR <error-text-here>
Or:
CHILD 17552: ERROR <error-text-here>
Submission Instructions
To submit your assignment (and also perform final testing of your code), please use Submitty, the
homework submission server. The specific URL is on the course website. As described above, please
only submit server code. Do not submit any client code.
Note that this assignment will be available on Submitty a few days before the due date. Please
do not ask on Piazza when Submitty will be available, as you should perform adequate testing on
your own Ubuntu platform.
That said, to make sure that your program does execute properly everywhere, including Submitty,
use the techniques below.
First, as discussed in class (on 1/18), output to standard output (stdout) is buffered. To ensure
buffered output is properly flushed to a file for grading on Submitty, use fflush() after every set
of printf() statements, as follows:
printf( ... ); /* print something out to stdout */
fflush( stdout ); /* make sure that the output is sent to a */
/* redirected output file, if specified */
Second, also discussed in class (on 1/18), use the DEBUG_MODE technique to make sure you do not
submit any debugging code. Here is an example:
#ifdef DEBUG_MODE
printf( "the value of x is %d\n", x );
printf( "the value of q is %d\n", q );
printf( "why is my program crashing here?!" );
fflush( stdout );
#endif
And to compile this code in “debug” mode, use the -D flag as follows:
bash$ gcc -Wall -Werror -D DEBUG_MODE homework4.c -pthread
http://www.6daixie.com/contents/19/1369.html
本团队核心人员组成主要包括硅谷工程师、BAT一线工程师，国内Top5硕士、博士生，精通德英语！我们主要业务范围是代做编程大作业、课程设计等等。
我们的方向领域：window编程 数值算法 AI人工智能 金融统计 计量分析 大数据 网络编程 WEB编程 通讯编程 游戏编程多媒体linux 外挂编程 程序API图像处理 嵌入式/单片机 数据库编程 控制台 进程与线程 网络安全 汇编语言 硬件编程 软件设计 工程标准规等。其中代写代做编程语言或工具包括但不限于以下范围:
C/C++/C#代写
Java代写
IT代写
Python代写
辅导编程作业
Matlab代写
Haskell代写
Processing代写
Linux环境搭建
Rust代写
Data Structure Assginment 数据结构代写
MIPS代写
Machine Learning 作业 代写
Oracle/SQL/PostgreSQL/Pig 数据库代写/代做/辅导
Web开发、网站开发、网站作业
ASP.NET网站开发
Finance Insurace Statistics统计、回归、迭代
Prolog代写
Computer Computational method代做
因为专业，所以值得信赖。如有需要，请加QQ：99515681 或邮箱：[email protected]
微信：codinghelp
原文地址：https://www.cnblogs.com/gotome/p/8994999.html