Geenplum是一款基于postgresql开发的mpp数据库，适合于数据仓库数据存储，是对hadoop无法有效处理结构化数据的一个很好的补充。五年前曾经使用过greenplum，那时的版本还是3.6，现在已经更新到4.3.5了，有消息称今年将开源。和以前的相比，安装方式也有了一些小变化，简记如下，如要更详细的说明，还是得看官方文档。
一、测试环境
CentOS 6.5 8台虚机
Greenplum 4.3.5
二、环境准备
1.修改系统参数 编辑 /etc/sysctl.conf ，以下是最小配置 kernel.shmmax = 500000000 kernel.shmmni = 4096 kernel.shmall = 4000000000 kernel.sem = 250 512000 100 2048 kernel.sysrq = 1 kernel.core_uses_pid = 1 kernel.msgmnb = 65536 kernel.msgmax = 65536 kernel.msgmni = 2048 net.ipv4.tcp_syncookies = 1 net.ipv4.ip_forward = 0 net.ipv4.conf.default.accept_source_route = 0 net.ipv4.tcp_tw_recycle = 1 net.ipv4.tcp_max_syn_backlog = 4096 net.ipv4.conf.all.arp_filter = 1 net.ipv4.ip_local_port_range = 1025 65535 net.core.netdev_max_backlog = 10000 net.core.rmem_max = 2097152 net.core.wmem_max = 2097152 vm.overcommit_memory = 2 2.修改文件打开数等限制 编辑/etc/security/limits.conf * soft nofile 65536 * hard nofile 65536 * soft nproc 131072 * hard nproc 131072 编辑/etc/security/limits.d/90-nproc.conf * soft nofile 65536 * hard nofile 65536 * soft nproc 131072 * hard nproc 131072 3.修改scheduler 编辑scheduler，原先默认是cfq echo deadline > /sys/block/vda/queue/scheduler [[email protected] ~]# more /sys/block/vda/queue/scheduler noop anticipatory [deadline] cfq 4.编辑/boot/grub/grub.conf 新增 elevator=deadline [root @bigdata03 ~]# more /boot/grub/grub.conf ...elevator=deadline crashkernel=auto ... 5.编辑设备块大小 [[email protected] ~]# /sbin/blockdev --setra 16384 /dev/vda [[email protected] ~]# /sbin/blockdev --getra /dev/vda 16384 6.配置hosts文件 编辑/etc/hosts，添加，选中203作为master，其他为segment 172.30.13.203 bigdata03.rdchz mdw 172.30.13.204 bigdata04.rdchz sdw1 172.30.13.205 bigdata05.rdchz sdw2 172.30.13.206 bigdata06.rdchz sdw3 172.30.13.207 bigdata07.rdchz sdw4 172.30.13.208 bigdata08.rdchz sdw5 172.30.13.209 bigdata09.rdchz sdw6 172.30.13.210 bigdata10.rdchz sdw7 7.分别创建各数据节点文件(一个含master，一个不含) [[email protected] ~]# more /tmp/hostfile_exkeys mdw sdw1 sdw2 sdw3 sdw4 sdw5 sdw6 sdw7 [[email protected] data]# more /tmp/hostfile_segments sdw1 sdw2 sdw3 sdw4 sdw5 sdw6 sdw7
三、集群安装
1.软件下载，上传、解压缩
下载地址：https://network.pivotal.io/products/pivotal-gpdb
unzip greenplum-db-4.3.5.2-build-1-RHEL5-x86_64.zip
/bin/bash greenplum-db-4.3.5.2-build-1-RHEL5-x86_64.bin
输入yes同意aggrement
输入安装路径，比如/usr/local/gpmaster
最后安装完后，结果是这样的：
[[email protected] gpmaster]# ll
total 284
drwxr-xr-x 3 gpadmin gpadmin 4096 Jun 24 12:29 bin
drwxr-xr-x 2 gpadmin goadmin 4096 Jun 24 12:09 demo
drwxr-xr-x 5 gpadmin gpadmin 4096 Jun 24 12:09 docs
drwxr-xr-x 2 gpadmin gpadmin 4096 Jun 24 12:09 etc
drwxr-xr-x 3 gpadmin gpadmin 4096 Jun 24 12:09 ext
-rw-r--r-- 1 gpadmin gpadmin 43025 Jun 24 12:29 GPDB-LICENSE.txt
-rw-r--r-- 1 gpadmin gpadmin 664 Jul 28 14:51 greenplum_path.sh
drwxr-xr-x 6 gpadmin gpadmin 4096 Jun 24 12:09 include
drwxr-xr-x 9 gpadmin gpadmin 12288 Jun 24 12:09 lib
-rw-r--r-- 1 gpadmin gpadmin 193083 Jun 24 12:29 LICENSE.thirdparty
drwxr-xr-x 2 gpadmin gpadmin 4096 Jun 24 12:29 sbin
drwxr-xr-x 3 gpadmin gpadmin 4096 Jun 24 11:57 share
2.建立master与各节点的信任关系
[[email protected] ~]# source /usr/local/greenplum-db/greenplum_path.sh
[[email protected] ~]# gpssh-exkeys -f /tmp/hostfile_exkeys
[STEP 1 of 5] create local ID and authorize on local host
[STEP 2 of 5] keyscan all hosts and update known_hosts file
[STEP 3 of 5] authorize current user on remote hosts
... send to sdw1
***
*** Enter password for sdw1:
... send to sdw2
... send to sdw3
... send to sdw4
... send to sdw5
... send to sdw6
... send to sdw7
[STEP 4 of 5] determine common authentication file content
[STEP 5 of 5] copy authentication files to all remote hosts
... finished key exchange with sdw1
... finished key exchange with sdw2
... finished key exchange with sdw3
... finished key exchange with sdw4
... finished key exchange with sdw5
... finished key exchange with sdw6
... finished key exchange with sdw7
[INFO] completed successfully
实质就是master与各个节点创建了个ssh的信任关系，信任的key存放在/root/.ssh/authorized_keys里
--测试是否无需密码登陆，ok
[[email protected] ~]# ssh [email protected]
Last login: Wed Jul 29 08:45:58 2015 from 172.30.11.31
[[email protected] ~]# exit
logout
Connection to 172.30.13.204 closed.
[[email protected] ~]#
[[email protected] ~]# ssh [email protected]
Last login: Wed Jul 29 08:49:20 2015 from 172.30.11.31
[[email protected] ~]# exit
logout
Connection to sdw7 closed.
[[email protected] ~]#
3.安装各个节点准备
首先把包传送到各个节点上，并解压缩以及创建用户，组等
[[email protected] ~]# gpseginstall -f /tmp/hostfile_exkeys -u gpadmin -p 123456
20150729:09:20:20:029326 gpseginstall:bigdata03:root-[INFO]:-Installation Info:
link_name greenplum-db
binary_path /usr/local/gpmaster
binary_dir_location /usr/local
binary_dir_name gpmaster
20150729:09:20:20:029326 gpseginstall:bigdata03:root-[INFO]:-check cluster password access
20150729:09:20:22:029326 gpseginstall:bigdata03:root-[INFO]:-de-duplicate hostnames
20150729:09:20:22:029326 gpseginstall:bigdata03:root-[INFO]:-master hostname: bigdata03.rdchz
20150729:09:20:23:029326 gpseginstall:bigdata03:root-[INFO]:-check for user gpadmin on cluster
20150729:09:20:24:029326 gpseginstall:bigdata03:root-[INFO]:-add user gpadmin on master
20150729:09:20:24:029326 gpseginstall:bigdata03:root-[INFO]:-add user gpadmin on cluster
20150729:09:20:24:029326 gpseginstall:bigdata03:root-[INFO]:-chown -R gpadmin:gpadmin /usr/local/greenplum-db
20150729:09:20:24:029326 gpseginstall:bigdata03:root-[INFO]:-chown -R gpadmin:gpadmin /usr/local/gpmaster
20150729:09:20:25:029326 gpseginstall:bigdata03:root-[INFO]:-rm -f /usr/local/gpmaster.tar; rm -f /usr/local/gpmaster.tar.gz
20150729:09:20:25:029326 gpseginstall:bigdata03:root-[INFO]:-cd /usr/local; tar cf gpmaster.tar gpmaster
20150729:09:20:27:029326 gpseginstall:bigdata03:root-[INFO]:-gzip /usr/local/gpmaster.tar
20150729:09:20:54:029326 gpseginstall:bigdata03:root-[INFO]:-remote command: mkdir -p /usr/local
20150729:09:20:55:029326 gpseginstall:bigdata03:root-[INFO]:-remote command: rm -rf /usr/local/gpmaster
20150729:09:20:56:029326 gpseginstall:bigdata03:root-[INFO]:-scp software to remote location
20150729:09:21:00:029326 gpseginstall:bigdata03:root-[INFO]:-remote command: gzip -f -d /usr/local/gpmaster.tar.gz
20150729:09:21:06:029326 gpseginstall:bigdata03:root-[INFO]:-md5 check on remote location
20150729:09:21:09:029326 gpseginstall:bigdata03:root-[INFO]:-remote command: cd /usr/local; tar xf gpmaster.tar
20150729:09:21:11:029326 gpseginstall:bigdata03:root-[INFO]:-remote command: rm -f /usr/local/gpmaster.tar
20150729:09:21:12:029326 gpseginstall:bigdata03:root-[INFO]:-remote command: cd /usr/local; rm -f greenplum-db; ln -fs gpmaster greenplum-db
20150729:09:21:13:029326 gpseginstall:bigdata03:root-[INFO]:-remote command: chown -R gpadmin:gpadmin /usr/local/greenplum-db
20150729:09:21:14:029326 gpseginstall:bigdata03:root-[INFO]:-remote command: chown -R gpadmin:gpadmin /usr/local/gpmaster
20150729:09:21:15:029326 gpseginstall:bigdata03:root-[INFO]:-rm -f /usr/local/gpmaster.tar.gz
20150729:09:21:15:029326 gpseginstall:bigdata03:root-[INFO]:-Changing system passwords ...
20150729:09:21:17:029326 gpseginstall:bigdata03:root-[INFO]:-exchange ssh keys for user root
20150729:09:21:22:029326 gpseginstall:bigdata03:root-[INFO]:-exchange ssh keys for user gpadmin
20150729:09:21:30:029326 gpseginstall:bigdata03:root-[INFO]:-/usr/local/greenplum-db/./sbin/gpfixuserlimts -f /etc/security/limits.conf -u gpadmin
20150729:09:21:30:029326 gpseginstall:bigdata03:root-[INFO]:-remote command: . /usr/local/greenplum-db/./greenplum_path.sh; /usr/local/greenplum-db/./sbin/gpfixuserlimts -f /etc/security/limits.conf -u gpadmin
20150729:09:21:31:029326 gpseginstall:bigdata03:root-[INFO]:-version string on master: gpssh version 4.3.5.2 build 1
20150729:09:21:31:029326 gpseginstall:bigdata03:root-[INFO]:-remote command: . /usr/local/greenplum-db/./greenplum_path.sh; /usr/local/greenplum-db/./bin/gpssh --version
20150729:09:21:32:029326 gpseginstall:bigdata03:root-[INFO]:-remote command: . /usr/local/gpmaster/greenplum_path.sh; /usr/local/gpmaster/bin/gpssh --version
20150729:09:21:38:029326 gpseginstall:bigdata03:root-[INFO]:-SUCCESS -- Requested commands completed
[[email protected] ~]#
--或者用gp自带的工具包测试能否无密码登陆已经安装包是否已经被解压到各节点上面，正常情况下会显示出各个节点的gphome信息
[[email protected] ~]# gpssh -f hostfile_exkeys -e ls -l $GPHOME
4.创建各个节点的数据文件夹，并授权，保证数据文件夹是干净的
[[email protected] data]# gpssh -f /tmp/hostfile_segments -e ‘mkdir -p /data/primary‘
[sdw4] mkdir -p /data/primary
[sdw3] mkdir -p /data/primary
[sdw5] mkdir -p /data/primary
[sdw1] mkdir -p /data/primary
[sdw6] mkdir -p /data/primary
[sdw2] mkdir -p /data/primary
[sdw7] mkdir -p /data/primary
[[email protected] data]# gpssh -f /tmp/hostfile_segments -e ‘chown gpadmin /data/primary‘
[sdw4] chown gpadmin /data/primary
[sdw3] chown gpadmin /data/primary
[sdw5] chown gpadmin /data/primary
[sdw1] chown gpadmin /data/primary
[sdw6] chown gpadmin /data/primary
[sdw2] chown gpadmin /data/primary
[sdw7] chown gpadmin /data/primary
5.时钟同步
[[email protected] ~]# vi /etc/ntp.conf
server 172.30.11.8
各个节点上的时钟以master为准，如04节点，需要改在第一行
[[email protected] ~]# vi /etc/ntp.conf
server mdw
[[email protected] ~]# gpssh -f /tmp/hostfile_exkeys -v -e ‘ntpd‘
[Reset ...]
[INFO] login sdw4
[INFO] login sdw3
[INFO] login mdw
[INFO] login sdw5
[INFO] login sdw1
[INFO] login sdw6
[INFO] login sdw2
[INFO] login sdw7
[sdw4] ntpd
[sdw3] ntpd
[ mdw] ntpd
[sdw5] ntpd
[sdw1] ntpd
[sdw6] ntpd
[sdw2] ntpd
[sdw7] ntpd
[INFO] completed successfully
[Cleanup...]
[[email protected] ~]#
6.检查参数设置
检查参数设置，正常情况是这样的
[[email protected] ~]# gpcheck -f /tmp/hostfile_exkeys -m mdw -s sdw1
20150729:11:18:20:001805 gpcheck:bigdata03:root-[INFO]:-dedupe hostnames
20150729:11:18:20:001805 gpcheck:bigdata03:root-[INFO]:-Detected platform: Generic Linux Cluster
20150729:11:18:20:001805 gpcheck:bigdata03:root-[INFO]:-generate data on servers
20150729:11:18:20:001805 gpcheck:bigdata03:root-[INFO]:-copy data files from servers
20150729:11:18:21:001805 gpcheck:bigdata03:root-[INFO]:-delete remote tmp files
20150729:11:18:21:001805 gpcheck:bigdata03:root-[INFO]:-Using gpcheck config file: /usr/local/greenplum-db/./etc/gpcheck.cnf
20150729:11:18:21:001805 gpcheck:bigdata03:root-[INFO]:-GPCHECK_NORMAL
20150729:11:18:21:001805 gpcheck:bigdata03:root-[INFO]:-gpcheck completing...
[[email protected] ~]#
7.检查网络
千兆的交换机，只能用千兆的网卡，网络吞吐一般
[[email protected] ~]# gpcheckperf -f /tmp/hostfile_segments -r n -d /tmp >test.out
[[email protected] ~]# more test.out
/usr/local/greenplum-db/./bin/gpcheckperf -f /tmp/hostfile_segments -r n -d /tmp
-------------------
-- NETPERF TEST
-------------------
====================
== RESULT
====================
Netperf bisection bandwidth test
sdw1 -> sdw2 = 845.140000
sdw2 -> sdw1 = 762.840000
sdw3 -> sdw4 = 932.170000
sdw4 -> sdw3 = 1021.450000
sdw5 -> sdw6 = 701.030000
sdw6 -> sdw5 = 806.280000
sdw7 -> sdw1 = 927.360000
sdw1 -> sdw7 = 1097.420000
Summary:
sum = 7093.69 MB/sec
min = 701.03 MB/sec
max = 1097.42 MB/sec
avg = 886.71 MB/sec
median = 927.36 MB/sec
[Warning] connection between sdw1 and sdw2 is no good
[Warning] connection between sdw2 and sdw1 is no good
[Warning] connection between sdw3 and sdw4 is no good
[Warning] connection between sdw5 and sdw6 is no good
[Warning] connection between sdw6 and sdw5 is no good
[Warning] connection between sdw7 and sdw1 is no good
[[email protected] ~]#
8.检查io
可以选其中几个节点测试，它会创建几个大文件来测试
[[email protected] .ssh]# more /tmp/hostfile_2
sdw1
sdw2
sdw3
[[email protected] ~]# gpcheckperf -f /tmp/hostfile_2 -r ds -D -d /data/primary/ -d /data/primary/ -d /data/primary/
/usr/local/greenplum-db/./bin/gpcheckperf -f /tmp/hostfile_2 -r ds -D -d /data/primary/ -d /data/primary/ -d /data/primary/
--------------------
-- DISK WRITE TEST
--------------------
--------------------
-- DISK READ TEST
--------------------
--------------------
-- STREAM TEST
--------------------
====================
== RESULT
====================
disk write avg time (sec): 1573.83
disk write tot bytes: 379920384000
disk write tot bandwidth (MB/s): 233.53
disk write min bandwidth (MB/s): 65.47 [sdw2]
disk write max bandwidth (MB/s): 86.37 [sdw1]
-- per host bandwidth --
disk write bandwidth (MB/s): 86.37 [sdw1]
disk write bandwidth (MB/s): 65.47 [sdw2]
disk write bandwidth (MB/s): 81.69 [sdw3]
disk read avg time (sec): 17.75
disk read tot bytes: 379920384000
disk read tot bandwidth (MB/s): 20440.61
disk read min bandwidth (MB/s): 6588.84 [sdw2]
disk read max bandwidth (MB/s): 7142.13 [sdw3]
-- per host bandwidth --
disk read bandwidth (MB/s): 6709.64 [sdw1]
disk read bandwidth (MB/s): 6588.84 [sdw2]
disk read bandwidth (MB/s): 7142.13 [sdw3]
stream tot bandwidth (MB/s): 12247.97
stream min bandwidth (MB/s): 3392.68 [sdw3]
stream max bandwidth (MB/s): 5069.60 [sdw2]
-- per host bandwidth --
stream bandwidth (MB/s): 3785.69 [sdw1]
stream bandwidth (MB/s): 5069.60 [sdw2]
stream bandwidth (MB/s): 3392.68 [sdw3]
四、集群初始化
做了那么多的铺垫准备后，进入真正的安装环节
在master上以gpadmin用户登陆
[[email protected] ~]# su - gpadmin
[[email protected] ~]$ source /usr/local/gpmaster/greenplum_path.sh
[[email protected] ~]$ mkdir gpconfigs
[[email protected] ~]$ cp $GPHOME/docs/cli_help/gpconfigs/gpinitsystem_config /home/gpadmin/gpconfigs/gpinitsystem_config
配置gpinitsystem_config文件，每个segment上1个数据文件夹，因为只有1块网卡，没有配置镜像
declare -a DATA_DIRECTORY=(/data/primary)
MASTER_PORT=1949
CHECK_POINT_SEGMENTS=64
ENCODING=UTF8
初始化
[[email protected] gpconfigs]$ gpinitsystem -c gpconfigs/gpinitsystem_config -h /tmp/hostfile_segments
20150729:15:41:27:030870 gpinitsystem:bigdata03:gpadmin-[INFO]:-Checking configuration parameters, please wait...
20150729:15:41:27:gpinitsystem:bigdata03:gpadmin-[FATAL]:-Configuration file gpconfigs/gpinitsystem_config does not exist. Script Exiting!
[[email protected] gpconfigs]$ cd ..
[[email protected] ~]$ gpinitsystem -c gpconfigs/gpinitsystem_config -h /tmp/hostfile_segments
20150730:16:52:55:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Checking configuration parameters, please wait...
20150730:16:52:55:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Reading Greenplum configuration file gpconfigs/gpinitsystem_config
20150730:16:52:55:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Locale has not been set in gpconfigs/gpinitsystem_config, will set to default value
20150730:16:52:55:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Locale set to en_US.utf8
20150730:16:52:55:031413 gpinitsystem:bigdata03:gpadmin-[WARN]:-Master hostname mdw does not match hostname output
20150730:16:52:55:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Checking to see if mdw can be resolved on this host
20150730:16:52:56:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Can resolve mdw to this host
20150730:16:52:56:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-No DATABASE_NAME set, will exit following template1 updates
20150730:16:52:56:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-MASTER_MAX_CONNECT not set, will set to default value 250
20150730:16:52:56:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Checking configuration parameters, Completed
20150730:16:52:56:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Commencing multi-home checks, please wait...
.......
20150730:16:52:58:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Configuring build for standard array
20150730:16:52:58:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Commencing multi-home checks, Completed
20150730:16:52:58:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Building primary segment instance array, please wait...
.......
20150730:16:53:03:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Checking Master host
20150730:16:53:03:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Checking new segment hosts, please wait...
.......
20150730:16:53:19:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Checking new segment hosts, Completed
20150730:16:53:19:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Greenplum Database Creation Parameters
20150730:16:53:19:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:---------------------------------------
20150730:16:53:19:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Master Configuration
20150730:16:53:19:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:---------------------------------------
20150730:16:53:19:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Master instance name = EMC Greenplum DW
20150730:16:53:19:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Master hostname = mdw
20150730:16:53:19:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Master port = 1949
20150730:16:53:19:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Master instance dir = /data/master/gpseg-1
20150730:16:53:19:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Master LOCALE = en_US.utf8
20150730:16:53:19:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Greenplum segment prefix = gpseg
20150730:16:53:19:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Master Database =
20150730:16:53:19:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Master connections = 250
20150730:16:53:19:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Master buffers = 128000kB
20150730:16:53:19:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Segment connections = 750
20150730:16:53:19:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Segment buffers = 128000kB
20150730:16:53:19:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Checkpoint segments = 64
20150730:16:53:19:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Encoding = UTF8
20150730:16:53:19:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Postgres param file = Off
20150730:16:53:19:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Initdb to be used = /usr/local/greenplum-db/bin/initdb
20150730:16:53:19:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-GP_LIBRARY_PATH is = /usr/local/greenplum-db/lib
20150730:16:53:20:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Ulimit check = Passed
20150730:16:53:20:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Array host connect type = Single hostname per node
20150730:16:53:20:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Master IP address [1] = ::1
20150730:16:53:20:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Master IP address [2] = 172.30.13.203
20150730:16:53:20:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Master IP address [3] = fe80::5054:ff:fec7:b4f5
20150730:16:53:20:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Standby Master = Not Configured
20150730:16:53:20:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Primary segment # = 1
20150730:16:53:20:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Total Database segments = 7
20150730:16:53:20:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Trusted shell = ssh
20150730:16:53:20:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Number segment hosts = 7
20150730:16:53:20:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Mirroring config = OFF
20150730:16:53:20:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:----------------------------------------
20150730:16:53:20:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Greenplum Primary Segment Configuration
20150730:16:53:20:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:----------------------------------------
20150730:16:53:20:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-sdw1 /data/primary/gpseg0 40000 2 0
20150730:16:53:20:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-sdw2 /data/primary/gpseg1 40000 3 1
20150730:16:53:20:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-sdw3 /data/primary/gpseg2 40000 4 2
20150730:16:53:20:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-sdw4 /data/primary/gpseg3 40000 5 3
20150730:16:53:20:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-sdw5 /data/primary/gpseg4 40000 6 4
20150730:16:53:20:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-sdw6 /data/primary/gpseg5 40000 7 5
20150730:16:53:20:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-sdw7 /data/primary/gpseg6 40000 8 6
Continue with Greenplum creation Yy/Nn>
y
20150730:16:53:29:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Building the Master instance database, please wait...
20150730:16:54:21:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Starting the Master in admin mode
20150730:16:54:32:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Commencing parallel build of primary segment instances
20150730:16:54:32:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Spawning parallel processes batch [1], please wait...
.......
20150730:16:54:32:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Waiting for parallel processes batch [1], please wait...
................................................................................................................
20150730:16:56:25:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:------------------------------------------------
20150730:16:56:25:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Parallel process exit status
20150730:16:56:26:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:------------------------------------------------
20150730:16:56:26:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Total processes marked as completed = 7
20150730:16:56:26:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Total processes marked as killed = 0
20150730:16:56:26:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Total processes marked as failed = 0
20150730:16:56:26:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:------------------------------------------------
20150730:16:56:26:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Deleting distributed backout files
20150730:16:56:26:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Removing back out file
20150730:16:56:26:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-No errors generated from parallel processes
20150730:16:56:26:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Restarting the Greenplum instance in production mode
20150730:16:56:26:022809 gpstop:bigdata03:gpadmin-[INFO]:-Starting gpstop with args: -a -i -m -d /data/master/gpseg-1
20150730:16:56:26:022809 gpstop:bigdata03:gpadmin-[INFO]:-Gathering information and validating the environment...
20150730:16:56:26:022809 gpstop:bigdata03:gpadmin-[INFO]:-Obtaining Greenplum Master catalog information
20150730:16:56:26:022809 gpstop:bigdata03:gpadmin-[INFO]:-Obtaining Segment details from master...
20150730:16:56:26:022809 gpstop:bigdata03:gpadmin-[INFO]:-Greenplum Version: ‘postgres (Greenplum Database) 4.3.5.2 build 1‘
20150730:16:56:27:022809 gpstop:bigdata03:gpadmin-[INFO]:-There are 0 connections to the database
20150730:16:56:27:022809 gpstop:bigdata03:gpadmin-[INFO]:-Commencing Master instance shutdown with mode=‘immediate‘
20150730:16:56:27:022809 gpstop:bigdata03:gpadmin-[INFO]:-Master host=bigdata03.rdchz
20150730:16:56:27:022809 gpstop:bigdata03:gpadmin-[INFO]:-Commencing Master instance shutdown with mode=immediate
20150730:16:56:27:022809 gpstop:bigdata03:gpadmin-[INFO]:-Master segment instance directory=/data/master/gpseg-1
20150730:16:56:28:022809 gpstop:bigdata03:gpadmin-[INFO]:-Attempting forceful termination of any leftover master process
20150730:16:56:28:022809 gpstop:bigdata03:gpadmin-[INFO]:-Terminating processes for segment /data/master/gpseg-1
20150730:16:56:28:022899 gpstart:bigdata03:gpadmin-[INFO]:-Starting gpstart with args: -a -d /data/master/gpseg-1
20150730:16:56:28:022899 gpstart:bigdata03:gpadmin-[INFO]:-Gathering information and validating the environment...
20150730:16:56:28:022899 gpstart:bigdata03:gpadmin-[INFO]:-Greenplum Binary Version: ‘postgres (Greenplum Database) 4.3.5.2 build 1‘
20150730:16:56:28:022899 gpstart:bigdata03:gpadmin-[INFO]:-Greenplum Catalog Version: ‘201310150‘
20150730:16:56:28:022899 gpstart:bigdata03:gpadmin-[INFO]:-Starting Master instance in admin mode
20150730:16:56:29:022899 gpstart:bigdata03:gpadmin-[INFO]:-Obtaining Greenplum Master catalog information
20150730:16:56:29:022899 gpstart:bigdata03:gpadmin-[INFO]:-Obtaining Segment details from master...
20150730:16:56:29:022899 gpstart:bigdata03:gpadmin-[INFO]:-Setting new master era
20150730:16:56:29:022899 gpstart:bigdata03:gpadmin-[INFO]:-Master Started...
20150730:16:56:29:022899 gpstart:bigdata03:gpadmin-[INFO]:-Shutting down master
20150730:16:56:31:022899 gpstart:bigdata03:gpadmin-[INFO]:-Commencing parallel segment instance startup, please wait...
...
20150730:16:56:34:022899 gpstart:bigdata03:gpadmin-[INFO]:-Process results...
20150730:16:56:34:022899 gpstart:bigdata03:gpadmin-[INFO]:-----------------------------------------------------
20150730:16:56:34:022899 gpstart:bigdata03:gpadmin-[INFO]:- Successful segment starts = 7
20150730:16:56:34:022899 gpstart:bigdata03:gpadmin-[INFO]:- Failed segment starts = 0
20150730:16:56:34:022899 gpstart:bigdata03:gpadmin-[INFO]:- Skipped segment starts (segments are marked down in configuration) = 0
20150730:16:56:34:022899 gpstart:bigdata03:gpadmin-[INFO]:-----------------------------------------------------
20150730:16:56:34:022899 gpstart:bigdata03:gpadmin-[INFO]:-
20150730:16:56:34:022899 gpstart:bigdata03:gpadmin-[INFO]:-Successfully started 7 of 7 segment instances
20150730:16:56:34:022899 gpstart:bigdata03:gpadmin-[INFO]:-----------------------------------------------------
20150730:16:56:34:022899 gpstart:bigdata03:gpadmin-[INFO]:-Starting Master instance bigdata03.rdchz directory /data/master/gpseg-1
20150730:16:56:35:022899 gpstart:bigdata03:gpadmin-[INFO]:-Command pg_ctl reports Master bigdata03.rdchz instance active
20150730:16:56:35:022899 gpstart:bigdata03:gpadmin-[INFO]:-No standby master configured. skipping...
20150730:16:56:35:022899 gpstart:bigdata03:gpadmin-[INFO]:-Database successfully started
20150730:16:56:35:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Completed restart of Greenplum instance in production mode
20150730:16:56:35:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Loading gp_toolkit...
20150730:16:56:38:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Scanning utility log file for any warning messages
20150730:16:56:39:031413 gpinitsystem:bigdata03:gpadmin-[WARN]:-*******************************************************
20150730:16:56:39:031413 gpinitsystem:bigdata03:gpadmin-[WARN]:-Scan of log file indicates that some warnings or errors
20150730:16:56:39:031413 gpinitsystem:bigdata03:gpadmin-[WARN]:-were generated during the array creation
20150730:16:56:39:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Please review contents of log file
20150730:16:56:39:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-/home/gpadmin/gpAdminLogs/gpinitsystem_20150730.log
20150730:16:56:39:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-To determine level of criticality
20150730:16:56:39:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-These messages could be from a previous run of the utility
20150730:16:56:39:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-that was called today!
20150730:16:56:39:031413 gpinitsystem:bigdata03:gpadmin-[WARN]:-*******************************************************
20150730:16:56:39:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Greenplum Database instance successfully created
20150730:16:56:39:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-------------------------------------------------------
20150730:16:56:39:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-To complete the environment configuration, please
20150730:16:56:39:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-update gpadmin .bashrc file with the following
20150730:16:56:39:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-1. Ensure that the greenplum_path.sh file is sourced
20150730:16:56:39:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-2. Add "export MASTER_DATA_DIRECTORY=/data/master/gpseg-1"
20150730:16:56:39:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:- to access the Greenplum scripts for this instance:
20150730:16:56:39:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:- or, use -d /data/master/gpseg-1 option for the Greenplum scripts
20150730:16:56:39:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:- Example gpstate -d /data/master/gpseg-1
20150730:16:56:39:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Script log file = /home/gpadmin/gpAdminLogs/gpinitsystem_20150730.log
20150730:16:56:39:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-To remove instance, run gpdeletesystem utility
20150730:16:56:39:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-To initialize a Standby Master Segment for this Greenplum instance
20150730:16:56:39:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Review options for gpinitstandby
20150730:16:56:39:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-------------------------------------------------------
20150730:16:56:39:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-The Master /data/master/gpseg-1/pg_hba.conf post gpinitsystem
20150730:16:56:39:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-has been configured to allow all hosts within this new
20150730:16:56:39:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-array to intercommunicate. Any hosts external to this
20150730:16:56:39:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-new array must be explicitly added to this file
20150730:16:56:39:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-Refer to the Greenplum Admin support guide which is
20150730:16:56:39:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-located in the /usr/local/greenplum-db/docs directory
20150730:16:56:40:031413 gpinitsystem:bigdata03:gpadmin-[INFO]:-------------------------------------------------------
[[email protected] ~]$
连接
[[email protected] ~]$ psql -p 1949 -d postgres
psql (8.2.15)
Type "help" for help.
postgres=# \l
List of databases
Name | Owner | Encoding | Access privileges
-----------+---------+----------+---------------------
postgres | gpadmin | UTF8 |
template0 | gpadmin | UTF8 | =c/gpadmin
: gpadmin=CTc/gpadmin
template1 | gpadmin | UTF8 | =c/gpadmin
: gpadmin=CTc/gpadmin
(3 rows)
postgres=# \q
[[email protected] ~]$
关闭与启动
关闭与启动
[[email protected] ~]$ gpstart
[[email protected] ~]$ gpstop -M fast
时间： 2024-10-10 06:23:09