Bringing up interface eth0: Error: No suitable

Bringing up interface eth0: Error: No suitable device found: no device found for connection ‘System eth0‘.

克隆虚拟机网卡启动中遇到的问题

1、重启网卡之后遇到如下错误

Bringing up interface eth0: Error: No suitable device found: no device found for connection ‘System eth0‘.

2、ifconfig eth0 up 出现如下错误

eth0: unknown interface: No such device

提示没有eth0这样的设备

3、# ifconfig -a 查看没有eth0设备

4、解决方案

#cd cd /etc/sysconfig/network-scripts/
#cp ifcfg-eth0 ifcfg-eth0.bak
#mv ifcfg-eth0 ifcfg-eth1
#vi /etc/udev/rules.d/70-persistent-net.rules 
 //查看eht1的mac地址和ifcfg-eth0的addr地址是否一致，如果不一致，改成一致即可
#servcie network restart //重启网卡即可

时间： 2024-09-30 16:33:14

Bringing up interface eth0: Error: No suitable的相关文章

如何解决虚拟机克隆导致"Bringing up interface eth0: Error: No suitable device found: no device found for connection 'System eth0'."

在VMware的虚拟机中克隆CentOS,在重启网卡的时候报错: Bringing up interface eth0: Error: No suitable device found: no device found for connection 'System eth0'. Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: E

Linux Centos 6.5网络启动不起来Bringing up interface eth0: Error:Connection activation failed:Device not man

Just follow the below steps and everything will be ok... 1. Remove Network Manager from startup Services.#chkconfig NetworkManager off 2. Add Default Net Manager#chkconfig network on 3.Stop NetworkManager first#service NetworkManager stop 4.and then

Bringing up interface eth0: Error:Unknown connection:

CentOS网络配置通过vim 修改CentOS /etc/sysconfig/network-scripts/ifcfg-eth0 网卡配置文件,配置网卡静态IP. 修改前文件内容如下: 在修改完后文件内容如下: 文件修改完,按ESC返回默认模式,输入:x保存文件后,输入如下命令重启network服务出现如下异常错误: 提示错误的经分析是,在修改ifcfg-eth0文件中的BOOTPROTO=static输入错误导致.重新输入正确后,启动正常. 总结: 1.如果,是在VMWare下启动不成

Bringing up interface eth0: Error:Connection activation failed:Device not managed by NetworkManager

Bringing up interface eth0: Device eth0 does not seem to be present, delaying initialization.

--http://blog.csdn.net/xluren/article/details/38986667 Bringing up interface eth0: Device eth0 does not seem to be present, delaying initialization. 在linux下的虚拟机出现了这个问题,问题的产生是因为之间做过部分的修改,clone等操作. 不就方案. CentOS Device does not seem to be present 故障现象

虚拟机CentOS复制到其他主机vm下IP地址无效（Bringing up interface eth0: Device eth0 does not seem to be present, delaying initialization)

Bringing up interface eth0: Device eth0 does not seem to be present, delaying initialization 在虚拟机VM下安装的CentOS遇到这个问题,我是将centos.vmx放到其他的VM下打开 #dhclient #service network restart Shutting down loopback insterface:

Bringing up interface eth0: Determining if ip address 10.109.67.81 is already in use for device eth0...

重启网卡出现提示: Bringing up interface eth0: Determining if ip address 10.109.67.81 is already in use for device eth0... [ OK ] Bringing up interface eth1: Determining if ip address 10.109.67.83

问题:Bringing up interface eth0: Device eth0 does not seem to be present,delaying initialization. [FAILED]—— 找不到网卡。

克隆虚拟机的时候或其他情况出现以下问题(命令service network restart): Bringing up interface eth0: Device eth0 does not seem to be present,delaying initialization. [FAILED] 1.造成的原因: 第一次创建的时候,在文件: /etc/sysconfig/network-scripts/ifcfg-eth0 里面设定了网卡0绑定了MAC地

克隆linux虚拟机报错Bringing up interface eth0

克隆了一个虚拟机,但是在启动网卡的时候,报错:Bringing up interface eth0: Device eth0 does not seem to be present ,delayin initialization 解决: 找到70-persistend-net.rules文件,查看eth1 ,记下他的mac address 然后:重命名网卡最后:修改ifcfg-eth1:HWADDR 修改为上面记下来的MAC address,修改驱动名最后重启网卡进程 service net