[Swift Weekly Contest 113]LeetCode950. 按递增顺序显示卡牌 | Reveal Cards In Increasing Order

In a deck of cards, every card has a unique integer.  You can order the deck in any order you want.

Initially, all the cards start face down (unrevealed) in one deck.

Now, you do the following steps repeatedly, until all cards are revealed:

  1. Take the top card of the deck, reveal it, and take it out of the deck.
  2. If there are still cards in the deck, put the next top card of the deck at the bottom of the deck.
  3. If there are still unrevealed cards, go back to step 1.  Otherwise, stop.

Return an ordering of the deck that would reveal the cards in increasing order.

The first entry in the answer is considered to be the top of the deck.

Example 1:

Input: [17,13,11,2,3,5,7]
Output: [2,13,3,11,5,17,7]
Explanation:
We get the deck in the order [17,13,11,2,3,5,7] (this order doesn‘t matter), and reorder it.
After reordering, the deck starts as [2,13,3,11,5,17,7], where 2 is the top of the deck.
We reveal 2, and move 13 to the bottom.  The deck is now [3,11,5,17,7,13].
We reveal 3, and move 11 to the bottom.  The deck is now [5,17,7,13,11].
We reveal 5, and move 17 to the bottom.  The deck is now [7,13,11,17].
We reveal 7, and move 13 to the bottom.  The deck is now [11,17,13].
We reveal 11, and move 17 to the bottom.  The deck is now [13,17].
We reveal 13, and move 17 to the bottom.  The deck is now [17].
We reveal 17.
Since all the cards revealed are in increasing order, the answer is correct.

Note:

  1. 1 <= A.length <= 1000
  2. 1 <= A[i] <= 10^6
  3. A[i] != A[j] for all i != j

牌组中的每张卡牌都对应有一个唯一的整数。你可以按你想要的顺序对这套卡片进行排序。

最初,这些卡牌在牌组里是正面朝下的(即,未显示状态)。

现在,重复执行以下步骤,直到显示所有卡牌为止:

  1. 从牌组顶部抽一张牌,显示它,然后将其从牌组中移出。
  2. 如果牌组中仍有牌,则将下一张处于牌组顶部的牌放在牌组的底部。
  3. 如果仍有未显示的牌,那么返回步骤 1。否则,停止行动。

返回能以递增顺序显示卡牌的牌组顺序。

答案中的第一张牌被认为处于牌堆顶部。

示例:

输入:[17,13,11,2,3,5,7]
输出:[2,13,3,11,5,17,7]
解释:
我们得到的牌组顺序为 [17,13,11,2,3,5,7](这个顺序不重要),然后将其重新排序。
重新排序后,牌组以 [2,13,3,11,5,17,7] 开始,其中 2 位于牌组的顶部。
我们显示 2,然后将 13 移到底部。牌组现在是 [3,11,5,17,7,13]。
我们显示 3,并将 11 移到底部。牌组现在是 [5,17,7,13,11]。
我们显示 5,然后将 17 移到底部。牌组现在是 [7,13,11,17]。
我们显示 7,并将 13 移到底部。牌组现在是 [11,17,13]。
我们显示 11,然后将 17 移到底部。牌组现在是 [13,17]。
我们展示 13,然后将 17 移到底部。牌组现在是 [17]。
我们显示 17。
由于所有卡片都是按递增顺序排列显示的,所以答案是正确的。

提示:

  1. 1 <= A.length <= 1000
  2. 1 <= A[i] <= 10^6
  3. 对于所有的 i != jA[i] != A[j]


72ms

 1 class Solution {
 2     func deckRevealedIncreasing(_ deck: [Int]) -> [Int] {
 3         var n:Int = deck.count
 4         var deck:[Int] = deck.sorted(by:<)
 5         var q:[Int] = [Int]()
 6         for i in (0...(n - 1)).reversed()
 7         {
 8             if i < n-1
 9             {
10                 q.insert(q.removeLast(), at: 0)
11             }
12             q.insert(deck[i], at: 0)
13         }
14         var p:Int = 0
15         var ret:[Int] = [Int](repeating:0,count:n)
16         for x in q
17         {
18             ret[p] = x
19             p += 1
20         }
21         return ret
22     }
23 }

原文地址:https://www.cnblogs.com/strengthen/p/10052972.html

时间: 2024-10-03 04:16:54

[Swift Weekly Contest 113]LeetCode950. 按递增顺序显示卡牌 | Reveal Cards In Increasing Order的相关文章

[Swift Weekly Contest 113]LeetCode952. 按公因数计算最大组件大小 | Largest Component Size by Common Factor

Given a non-empty array of unique positive integers A, consider the following graph: There are A.length nodes, labelled A[0] to A[A.length - 1]; There is an edge between A[i] and A[j] if and only if A[i] and A[j] share a common factor greater than 1.

113th LeetCode Weekly Contest Reveal Cards In Increasing Order

In a deck of cards, every card has a unique integer.  You can order the deck in any order you want. Initially, all the cards start face down (unrevealed) in one deck. Now, you do the following steps repeatedly, until all cards are revealed: Take the

[Swift Weekly Contest 114]LeetCode953. 验证外星语词典 | Verifying an Alien Dictionary

In an alien language, surprisingly they also use english lowercase letters, but possibly in a different order. The order of the alphabet is some permutation of lowercase letters. Given a sequence of words written in the alien language, and the order 

[Swift Weekly Contest 117]LeetCode967. 具有相同连续差异的数字 | Numbers With Same Consecutive Differences

Return all non-negative integers of length N such that the absolute difference between every two consecutive digits is K. Note that every number in the answer must not have leading zeros except for the number 0 itself. For example, 01 has one leading

[Swift Weekly Contest 118]LeetCode970. 强整数 | Powerful Integers

Given two non-negative integers x and y, an integer is powerful if it is equal to x^i + y^j for some integers i >= 0 and j >= 0. Return a list of all powerful integers that have value less than or equal to bound. You may return the answer in any ord

[Swift Weekly Contest 118]LeetCode969.煎饼排序 | Pancake Sorting

Given an array A, we can perform a pancake flip: We choose some positive integer k <= A.length, then reverse the order of the first k elements of A.  We want to perform zero or more pancake flips (doing them one after another in succession) to sort t

[Swift Weekly Contest 118]LeetCode971.翻转二叉树以匹配先序遍历 | Flip Binary Tree To Match Preorder Traversal

Given a binary tree with N nodes, each node has a different value from {1, ..., N}. A node in this binary tree can be flipped by swapping the left child and the right child of that node. Consider the sequence of N values reported by a preorder traver

[Swift Weekly Contest 118]LeetCode973. 最接近原点的 K 个点 | K Closest Points to Origin

We have a list of points on the plane.  Find the K closest points to the origin (0, 0). (Here, the distance between two points on a plane is the Euclidean distance.) You may return the answer in any order.  The answer is guaranteed to be unique (exce

[Swift Weekly Contest 108]LeetCode930. 和相同的二元子数组 | Binary Subarrays With Sum

In an array A of 0s and 1s, how many non-empty subarrays have sum S? Example 1: Input: A = [1,0,1,0,1], S = 2 Output: 4 Explanation: The 4 subarrays are bolded below: [1,0,1,0,1] [1,0,1,0,1] [1,0,1,0,1] [1,0,1,0,1] Note: A.length <= 30000 0 <= S <