建立raid5
创建raid5
添加新1G热背盘，模拟磁盘故障，自动顶替
移除故障盘
停止阵列，重新激活阵列
再加新的1G热备盘，扩展阵列容量，从3个磁盘扩展到4个
环境：sde1，sde2，sde3，sde4，sde5，sde6 每个1G
创建六个分区，从第四个开始用扩展分区
[[email protected] ~]# fdisk /dev/sde
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0x8800cb6a.
Command (m for help): p
Disk /dev/sde: 10.7 GB, 10737418240 bytes, 20971520 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x8800cb6a
Device Boot Start End Blocks Id System
Command (m for help): n
Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): p
Partition number (1-4, default 1): 1
First sector (2048-20971519, default 2048):
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-20971519, default 20971519): +1G
Partition 1 of type Linux and of size 1 GiB is set
Command (m for help): n
Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
Select (default p): p
Partition number (2-4, default 2): 2
First sector (2099200-20971519, default 2099200):
Using default value 2099200
Last sector, +sectors or +size{K,M,G} (2099200-20971519, default 20971519): +1G
Partition 2 of type Linux and of size 1 GiB is set
Command (m for help): n
Partition type:
p primary (2 primary, 0 extended, 2 free)
e extended
Select (default p): p
Partition number (3,4, default 3): 3
First sector (4196352-20971519, default 4196352):
Using default value 4196352
Last sector, +sectors or +size{K,M,G} (4196352-20971519, default 20971519): +1G
Partition 3 of type Linux and of size 1 GiB is set
Command (m for help): n
Partition type:
p primary (3 primary, 0 extended, 1 free)
e extended
Select (default e): e
Selected partition 4
First sector (6293504-20971519, default 6293504):
Using default value 6293504
Last sector, +sectors or +size{K,M,G} (6293504-20971519, default 20971519):
Using default value 20971519
Partition 4 of type Extended and of size 7 GiB is set
Command (m for help): p
Disk /dev/sde: 10.7 GB, 10737418240 bytes, 20971520 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x8800cb6a
Device Boot Start End Blocks Id System
/dev/sde1 2048 2099199 1048576 83 Linux
/dev/sde2 2099200 4196351 1048576 83 Linux
/dev/sde3 4196352 6293503 1048576 83 Linux
/dev/sde4 6293504 20971519 7339008 5 Extended
Command (m for help): n
All primary partitions are in use
Adding logical partition 5
First sector (6295552-20971519, default 6295552):
Using default value 6295552
Last sector, +sectors or +size{K,M,G} (6295552-20971519, default 20971519): +1G
Partition 5 of type Linux and of size 1 GiB is set
Command (m for help): n
All primary partitions are in use
Adding logical partition 6
First sector (8394752-20971519, default 8394752):
Using default value 8394752
Last sector, +sectors or +size{K,M,G} (8394752-20971519, default 20971519): +1G
Partition 6 of type Linux and of size 1 GiB is set
Command (m for help): p
Disk /dev/sde: 10.7 GB, 10737418240 bytes, 20971520 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x8800cb6a
Device Boot Start End Blocks Id System
/dev/sde1 2048 2099199 1048576 83 Linux
/dev/sde2 2099200 4196351 1048576 83 Linux
/dev/sde3 4196352 6293503 1048576 83 Linux
/dev/sde4 6293504 20971519 7339008 5 Extended
/dev/sde5 6295552 8392703 1048576 83 Linux
/dev/sde6 8394752 10491903 1048576 83 Linux
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[[email protected] ~]# ll /dev/sde*
brw-rw----. 1 root disk 8, 64 Jun 4 21:45 /dev/sde
brw-rw----. 1 root disk 8, 65 Jun 4 21:45 /dev/sde1
brw-rw----. 1 root disk 8, 66 Jun 4 21:45 /dev/sde2
brw-rw----. 1 root disk 8, 67 Jun 4 21:45 /dev/sde3
brw-rw----. 1 root disk 8, 68 Jun 4 21:45 /dev/sde4
brw-rw----. 1 root disk 8, 69 Jun 4 21:45 /dev/sde5
brw-rw----. 1 root disk 8, 70 Jun 4 21:45 /dev/sde6
创建raid5
[[email protected] ~]# mdadm -C -v /dev/md5 -l 5 -n 3 -c 32 -x 1 /dev/sde{1,2,3,4}
mdadm: layout defaults to left-symmetric
mdadm: layout defaults to left-symmetric
mdadm: /dev/sde4 is not suitable for this array. #这里报错，因为第四个分区是扩展分区开始的
mdadm: create aborted
[[email protected] ~]# mdadm -C -v /dev/md5 -l 5 -n 3 -c 32 -x 1 /dev/sde{1,2,3,5}
mdadm: layout defaults to left-symmetric
mdadm: layout defaults to left-symmetric
mdadm: size set to 1047552K
mdadm: Defaulting to version 1.2 metadata
mdadm: array /dev/md5 started.
[[email protected] ~]# cat /proc/mdstat
Personalities : [raid0] [raid1] [raid6] [raid5] [raid4]
md5 : active raid5 sde3[4] sde5[3](S) sde2[1] sde1[0]
2095104 blocks super 1.2 level 5, 32k chunk, algorithm 2 [3/3] [UUU]
md1 : active raid1 sdc3[2] sdc2[1]
1047552 blocks super 1.2 [2/2] [UU]
md0 : active raid0 sdb2[1] sdb1[0]
2095104 blocks super 1.2 512k chunks
unused devices: <none>
[[email protected] ~]# mdadm -Ds
ARRAY /dev/md0 metadata=1.2 name=ZQ:0 UUID=00d9284f:6fd6b3b0:afc571c6:c5441608
ARRAY /dev/md1 metadata=1.2 name=ZQ:1 UUID=137b8247:e0ced5a2:625805ac:e9b31692
ARRAY /dev/md5 metadata=1.2 spares=1 name=ZQ:5 UUID=32056d5a:35cf0716:fd761180:cc7b848b
停止md5
[[email protected] ~]# mdadm -Ds
ARRAY /dev/md0 metadata=1.2 name=ZQ:0 UUID=00d9284f:6fd6b3b0:afc571c6:c5441608
ARRAY /dev/md1 metadata=1.2 name=ZQ:1 UUID=137b8247:e0ced5a2:625805ac:e9b31692
ARRAY /dev/md5 metadata=1.2 spares=1 name=ZQ:5 UUID=32056d5a:35cf0716:fd761180:cc7b848b
[[email protected] ~]# mdadm -Ds > /etc/mdadm.conf
[[email protected] ~]# cat !$
cat /etc/mdadm.conf
ARRAY /dev/md0 metadata=1.2 name=ZQ:0 UUID=00d9284f:6fd6b3b0:afc571c6:c5441608
ARRAY /dev/md1 metadata=1.2 name=ZQ:1 UUID=137b8247:e0ced5a2:625805ac:e9b31692
ARRAY /dev/md5 metadata=1.2 spares=1 name=ZQ:5 UUID=32056d5a:35cf0716:fd761180:cc7b848b
[[email protected] ~]# mdadm -S /dev/md5
mdadm: stopped /dev/md5
[[email protected] ~]# cat /proc/mdstat
Personalities : [raid0] [raid1] [raid6] [raid5] [raid4]
md1 : active raid1 sdc3[2] sdc2[1]
1047552 blocks super 1.2 [2/2] [UU]
md0 : active raid0 sdb2[1] sdb1[0]
2095104 blocks super 1.2 512k chunks
unused devices: <none>
激活
[[email protected] ~]# mdadm -As
mdadm: Found some drive for an array that is already active: /dev/md1
mdadm: giving up.
mdadm: /dev/md5 has been started with 3 drives and 1 spare.
mdadm: Found some drive for an array that is already active: /dev/md1
mdadm: giving up.
扩展
[[email protected] ~]# fdisk /dev/md5
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0xb42dd723.
Command (m for help): n
Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): p
Partition number (1-4, default 1): 1
First sector (2048-4190207, default 2048):
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-4190207, default 4190207):
Using default value 4190207
Partition 1 of type Linux and of size 2 GiB is set
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[[email protected] ~]# mkfs.ext4 /dev/md
md0 md0p1 md1 md1p1 md5 md5p1
[[email protected] ~]# mkfs.ext4 /dev/md5p1
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=8 blocks, Stripe width=16 blocks
131072 inodes, 523520 blocks
26176 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=536870912
16 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912
Allocating group tables: done
Writing inode tables: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done
[[email protected] ~]# mkdir /raid5
[[email protected] ~]# mount /dev/md5p1 /raid5
[[email protected] ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 15G 3.6G 12G 24% /
devtmpfs 474M 0 474M 0% /dev
tmpfs 489M 156K 489M 1% /dev/shm
tmpfs 489M 7.0M 482M 2% /run
tmpfs 489M 0 489M 0% /sys/fs/cgroup
/dev/sda1 197M 131M 67M 67% /boot
tmpfs 98M 12K 98M 1% /run/user/1000
/dev/sr0 4.1G 4.1G 0 100% /run/media/zq/CentOS 7 x86_64
/dev/md0p1 2.0G 6.1M 1.9G 1% /raid0
/dev/md1p1 990M 2.6M 921M 1% /raid1
/dev/md5p1 2.0G 6.0M 1.9G 1% /raid5
[[email protected] ~]# umount /raid5
[[email protected] ~]# mdadm -a /dev/md5 /dev/sde6
mdadm: added /dev/sde6
[[email protected] ~]# cat /proc/mdstat
Personalities : [raid0] [raid1] [raid6] [raid5] [raid4]
md5 : active raid5 sde6[5](S) sde1[0] sde5[3](S) sde3[4] sde2[1]
2095104 blocks super 1.2 level 5, 32k chunk, algorithm 2 [3/3] [UUU]
md1 : active raid1 sdc3[2] sdc2[1]
1047552 blocks super 1.2 [2/2] [UU]
md0 : active raid0 sdb2[1] sdb1[0]
2095104 blocks super 1.2 512k chunks
unused devices: <none>
[[email protected] ~]# mdadm -G /dev/md5 -n 4
[[email protected] ~]# cat /proc/mdstat
Personalities : [raid0] [raid1] [raid6] [raid5] [raid4]
md5 : active raid5 sde6[5] sde1[0] sde5[3](S) sde3[4] sde2[1]
3142656 blocks super 1.2 level 5, 32k chunk, algorithm 2 [4/4] [UUUU]
md1 : active raid1 sdc3[2] sdc2[1]
1047552 blocks super 1.2 [2/2] [UU]
md0 : active raid0 sdb2[1] sdb1[0]
2095104 blocks super 1.2 512k chunks
unused devices: <none>
[[email protected] ~]# cat /etc/mdadm.conf
ARRAY /dev/md0 metadata=1.2 name=ZQ:0 UUID=00d9284f:6fd6b3b0:afc571c6:c5441608
ARRAY /dev/md1 metadata=1.2 name=ZQ:1 UUID=137b8247:e0ced5a2:625805ac:e9b31692
ARRAY /dev/md5 metadata=1.2 spares=1 name=ZQ:5 UUID=32056d5a:35cf0716:fd761180:cc7b848b
时间： 2024-10-29 19:07:49