(转)git clone: error: RPC failed; result=18, HTTP code = 200 解决办法

(转)git clone: error: RPC failed; result=18, HTTP code = 200 解决办法的相关文章

cocoaPods安装成功终端代码(期间报error: RPC failed; result=56, HTTP code = 200)

Last login: Sat Oct 15 23:30:24 on ttys002 Sivek_lindeMacBook-Pro:~ Sivek_lin$ sudo gem update --system Password: Latest version currently installed. Aborting. Sivek_lindeMacBook-Pro:~ Sivek_lin$ $gem sources -l -bash: sources: command not found Sive

git push error: RPC failed; result=56, HTTP code = 0 [closed]

git push的时候发生标题上面的错误,不知道怎么解决.搜索了下stackoverflow,上面说是http的postBuffer不够导致的. 要运行以下命令: git config --global http.postBuffer 2M 但是,很遗憾,没有解决,还是同样的错误. 又有的回答说是github本身的问题导致的,瞎,我整个下午都是这样的问题,不可能是github网站本身的问题吧?然后我重新下载最新版的git,重新配置了下SSH key,还是不行.等我解决了就update这文章..=

使用git clone error: RPC failed

git clone时,出现这个错误. remote: Counting objects: 4592517, done. remote: Compressing objects: 100% (1140430/1140430), done. error: RPC failed; result=56, HTTP code = 2008.82 MiB | 4.72 MiB/s fatal: The remote end hung up unexpectedly fatal: early EOF fata

git push报错:error: RPC failed; result=22, HTTP code = 413

新项目推送到服务器时报错: error: RPC failed; result=22, HTTP code = 413| 7.66 MiB/s    fatal: The remote end hung up unexpectedly 查了下,属于项目中有大文件,而http推送限制造成的,需要修改服务器配置.因为git服务器是通过nginx做反向代理之后实现的,因此需要修改nginx和appache(git服务器): 1.nginx服务器配置:/etc/nginx/conf.d/default.

git error: RPC failed; result=22, HTTP code = 502

git pull 的时候 出现的这个错误,一开始按照网上的解决方法  git config http.postBuffer 524288000   修改传输字节限制, 还是会报错. 后来把配置文件里面的 [Http]代理注释掉, 就OK了. (不懂这个错误是为什么, 远程的文件确实是挺大的, 但是修改传输字节也没用, 最后还是把代理注释掉才搞定. 有时候  git pull 也会有代理引起的错误,遇到解决不了的, 可以尝试注释掉代理看看) 

git clone报错error: RPC failed; curl 18 transfer closed with outstanding read data remaining

具体错误信息如下图: error: RPC failed; curl 18 transfer closed with outstanding read data remaining    fatal: The remote end hung up unexpectedly    fatal: early EOF    fatal: index-pack failed 这个错误产生的原因是时间太久,资源太大. 基于此,第一种考量即扩大缓存区.即在命令行输入:         git config 

Git 报错:git - error: RPC failed; curl 18 transfer closed with outstanding read data remaining 解决方案

error: RPC failed; curl 18 transfer closed with outstanding read data remaining because have error when clone by HTTP protocol (curl command). And, you should increment buffer size: git config --global http.postBuffer 524288000 原因:由于Http协议错误,当Pull或者C

解决git报错:error: RPC failed; curl 18 transfer closed with outstanding read data remaining 的方法

报错信息: error: RPC failed; curl 18 transfer closed with outstanding read data remainingfatal: the remote end hung up unexpectedlyfatal: early EOFfatal: index-pack failed 解决方法一:网上大部分解决措施:命令终端输入如下命令,但是一般并不好使, git config --global http.postBuffer 524288000

Jenkins之发布报错“error: RPC failed; curl 18 transfer closed with outstanding read data remaining”

报错信息: error: RPC failed; curl 18 transfer closed with outstanding read data remaining fatal: The remote end hung up unexpectedly fatal: early EOF fatal: index-pack failed at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandIn(CliGitAPIImpl.