poj -2632 Crashing Robots

http://poj.org/problem?id=2632

Crashing Robots

Time Limit: 1000MS   Memory Limit: 65536K
Total Submissions: 7470   Accepted: 3265

Description

In a modernized warehouse, robots are used to fetch the goods. Careful planning is needed to ensure that the robots reach their destinations without crashing into each other. Of course, all warehouses are rectangular,
and all robots occupy a circular floor space with a diameter of 1 meter. Assume there are N robots, numbered from 1 through N. You will get to know the position and orientation of each robot, and all the instructions, which are carefully (and mindlessly) followed
by the robots. Instructions are processed in the order they come. No two robots move simultaneously; a robot always completes its move before the next one starts moving.

A robot crashes with a wall if it attempts to move outside the area of the warehouse, and two robots crash with each other if they ever try to occupy the same spot.

Input

The first line of input is K, the number of test cases. Each test case starts with one line consisting of two integers, 1 <= A, B <= 100, giving the size of the warehouse in meters. A is the length in the EW-direction,
and B in the NS-direction.

The second line contains two integers, 1 <= N, M <= 100, denoting the numbers of robots and instructions respectively.

Then follow N lines with two integers, 1 <= Xi <= A, 1 <= Yi <= B and one letter (N, S, E or W), giving the starting position and direction of each robot, in order from 1 through N. No two robots start at the same position.

Figure 1: The starting positions of the robots in the sample warehouse

Finally there are M lines, giving the instructions in sequential order.

An instruction has the following format:

< robot #> < action> < repeat>

Where is one of

  • L: turn left 90 degrees,
  • R: turn right 90 degrees, or
  • F: move forward one meter,

and 1 <= < repeat> <= 100 is the number of times the robot should perform this single move.

Output

Output one line for each test case:

  • Robot i crashes into the wall, if robot i crashes into a wall. (A robot crashes into a wall if Xi = 0, Xi = A + 1, Yi = 0 or Yi = B + 1.)
  • Robot i crashes into robot j, if robots i and j crash, and i is the moving robot.
  • OK, if no crashing occurs.

Only the first crash is to be reported.

Sample Input

4
5 4
2 2
1 1 E
5 4 W
1 F 7
2 F 7
5 4
2 4
1 1 E
5 4 W
1 F 3
2 F 1
1 L 1
1 F 3
5 4
2 2
1 1 E
5 4 W
1 L 96
1 F 2
5 4
2 3
1 1 E
5 4 W
1 F 4
1 L 1
1 F 20

Sample Output

Robot 1 crashes into the wall
Robot 1 crashes into robot 2
OK
Robot 1 crashes into robot 2

Source

Nordic 2005

//赤裸裸的模拟,开始有点卡,就是按照题意一步步来就好了,注意是如果碰撞就标记,只判断第一次就好。

#include<cstdio>
#include<cstring>
struct point
{
    int x,y;
    char c;
}f[105];
struct node
{
    int x,y;
    char c;
}ff[105];
int a,b,n,m;
bool check(int k)  //判断函数,开始就是有点卡这里
{
    int i;
    if(f[k].x<=0||f[k].x>a||f[k].y<=0||f[k].y>b) //跟墙碰撞
    {
        printf("Robot %d crashes into the wall\n",k);
        return 1;
    }
    for(i=1;i<=n;i++)   //跟其它机器人碰撞
    {
        if(i==k) continue;
        if(f[k].x==f[i].x&&f[k].y==f[i].y)
        {
           printf("Robot %d crashes into robot %d\n",k,i);
           return 1;
        }
    }
    return 0;
}
int main()
{
    //freopen("a.txt","r",stdin);
    int t,i,j,l,k,flag;
    scanf("%d",&t);
    while(t--)
    {
        scanf("%d%d%d%d",&a,&b,&n,&m);
        for(i=1;i<=n;i++)
        {
            scanf("%d%d %c",&f[i].x,&f[i].y,&f[i].c);
            //printf("%d%d%c\n",f[i].x,f[i].y,f[i].c);
        }
        flag=0;
        for(i=1;i<=m;i++)
        {
            scanf("%d %c %d",&ff[i].x,&ff[i].c,&ff[i].y);
            //printf("%d%c%d\n",ff[i].x,ff[i].c,ff[i].y);
            //
            k=ff[i].x;
            if(ff[i].c=='L')
            {
                l=ff[i].y%4; //4个方向一个周期  看剩下多少步
                for(j=1;j<=l;j++)
                {
                    if(f[k].c=='N')
                        f[k].c='W';
                    else if(f[k].c=='E')
                        f[k].c='N';
                    else if(f[k].c=='S')
                        f[k].c='E';
                    else if(f[k].c=='W')
                        f[k].c='S';
                }
            }
            else if(ff[i].c=='R')
            {
                l=ff[i].y%4; //同理
                for(j=1;j<=l;j++)
                {
                    if(f[k].c=='N')
                        f[k].c='E';
                    else if(f[k].c=='E')
                        f[k].c='S';
                    else if(f[k].c=='S')
                        f[k].c='W';
                    else if(f[k].c=='W')
                        f[k].c='N';
                }
            }
            else
            {
                l=ff[i].y;
                if(!flag)   //只需要判断一次就行。
                {
                for(j=1;j<=l;j++)
                {
                    if(f[k].c=='N')
                    {
                        f[k].y++;
                        flag=check(k);
                        if(flag)break;
                    }
                    else if(f[k].c=='W')
                    {
                        f[k].x--;
                        flag=check(k);
                        if(flag)break;
                    }
                    else if(f[k].c=='S')
                    {
                        f[k].y--;
                        flag=check(k);
                        if(flag) break;
                    }
                    else if(f[k].c=='E')
                    {
                        f[k].x++;
                        flag=check(k);
                        if(flag)break;
                    }
                }
                }
            }
        }
        if(!flag) printf("OK\n");
    }
    return 0;
}

poj -2632 Crashing Robots

时间: 2024-11-08 03:13:20

poj -2632 Crashing Robots的相关文章

poj 2632 Crashing Robots, 模拟

点击打开链接 简单 模拟机器人的移动,发生碰撞时输出相应的信息. code #include <cstdio> #include <cstring> using namespace std; struct node{ int k; int s; } mtx[200][200]; struct node1{ int x, y; } rob[200]; int n, m; int dir[4][2]= {{0,1},{1,0},{0,-1},{-1,0}}; //N, E, S, W

POJ 2632 Crashing Robots (模拟 坐标调整)(fflush导致RE)

题目链接:http://poj.org/problem?id=2632 先话说昨天顺利1Y之后,直到今天下午才再出题 TAT,真是刷题计划深似海,从此AC是路人- - 本来2632是道稍微恶心点的模拟,但毕竟是模拟,一般模拟都是只要示例过了基本就AC了,但这个题很特殊 我开始的时候一直跑不出测试示例,才发现题目中的插图和我构想的坐标系是不一样的(看来还不能轻易忽视掉插图啊) 这个题给出的坐标系是纵轴为y,横轴为x,y从下到上依次递增,x轴是从左到右递增 而我用的二维数组记录的地图,也就是说我的纵

poj 2632 Crashing Robots(模拟)

链接:poj 2632 题意:在n*m的房间有num个机器,它们的坐标和方向已知,现给定一些指令及机器k执行的次数, L代表机器方向向左旋转90°,R代表机器方向向右旋转90°,F表示前进,每次前进一米 若前进时机器i撞到机器j,输出"Robot i crashes into robot j " 若机器走出了n*m的房间,输出"Robot i crashes into the wall " 当出现上述情况,只需输出第一次出现上述的情况 若所有指令执行完,所有机器都没

POJ 2632 Crashing Robots(模拟题)

Crashing Robots Time Limit: 1000MS   Memory Limit: 65536K Total Submissions: 7880   Accepted: 3429 Description In a modernized warehouse, robots are used to fetch the goods. Careful planning is needed to ensure that the robots reach their destination

POJ 2632 Crashing Robots(较为繁琐的模拟)

题目链接:http://poj.org/problem?id=2632 题目大意:题意简单,N个机器人在一个A*B的网格上运动,告诉你机器人的起始位置和对它的具体操作,输出结果: 1.Robot i crashes into the wall, if robot i crashes into a wall. (A robot crashes into a wall if Xi = 0, Xi = A + 1, Yi = 0 or Yi = B + 1.) 撞墙 2.Robot i crashes

Poj OpenJudge 百练 2632 Crashing Robots

1.Link: http://poj.org/problem?id=2632 http://bailian.openjudge.cn/practice/2632/ 2.Content: Crashing Robots Time Limit: 1000MS   Memory Limit: 65536K Total Submissions: 7912   Accepted: 3441 Description In a modernized warehouse, robots are used to

POJ 1573 &amp; POJ 2632(两道有趣的Robot)

题目链接:POJ 1573 Robot Motion & POJ 2632 Crashing Robots [题意]题意就不说了,有兴趣从链接点进去看吧,就是机器人各种打扫房间,行驶指令. [思路]2632是一道纯模拟题,只要把题意读懂,就可以用代码模拟过程,只是写起来有点蛋疼,代码力还是欠缺啊.而1573感觉挺新奇的,我用的DFS来模拟,好久没有写DFS,一开始又把dir数组写错了,结果总是得出0. 下面贴代码,先是2632的AC代码: 1 /* 2 ** POJ 2632 Crashing

POJ 2632:Crashing Robots

Crashing Robots Time Limit: 1000MS   Memory Limit: 65536K Total Submissions: 8424   Accepted: 3648 Description In a modernized warehouse, robots are used to fetch the goods. Careful planning is needed to ensure that the robots reach their destination

poj 2632

题意:一个房间由m*n个方块组成  每个机器人占据一个方块  这些机器人能够移动  问 这些机器人的移动动作全部完成后 会不会发生冲撞事件 解题策略:简单的模拟题目 #include<iostream> #include<cstring> using namespace std; struct Node { int x,y; int dir; }p[10000],map[111][111]; int dir[4][2]={1,0,-1,0,0,-1,0,1}; int main()