Centos6 源码部署MySQL5.6

mysql从5.5版本开始，不再使用./configure编译，而是使用cmake编译器，具体的cmake编译参数可以参考mysql官网文档(※ 非常重要)

http://dev.mysql.com/doc/refman/5.6/en/source-configuration-options.html

mysql-5.6.16.tar.gz源码包下载地址：

http://dev.mysql.com/get/Downloads/MySQL-5.6/mysql-5.6.15.tar.gz

我的mysql目录配置如下：

安装路径：/usr/local/mysql

数据库路径：/data/mysql

源码包存放位置：/usr/software

准备工作：安装基本依赖包，先用yum安装cmake、automake 、autoconf ，另MySQL 5.6.x需要最少安装的包有：bison,gcc、gcc-c++、ncurses-devel

[[email protected] ~]# yum install cmake make -y

[[email protected] ~]# yum install gcc gcc-c++ autoconf bison automake zlib* fiex* libxml* ncurses-devel libmcrypt* libtool-ltdl-devel* -y

[[email protected] ~]# cp /root/mysql-5.6.15.tar.gz /usr/software/

[[email protected] ~]# cd /usr/software

开始编译安装

[[email protected] ~]# tar -zxvf mysql-5.6.15.tar.gz

[[email protected] ~]# cd mysql-5.6.15

[[email protected] ~]# cmake -DCMAKE_INSTALL_PREFIX=/usr/local/mysql \

-DMYSQL_UNIX_ADDR=/data/mysql/mysql.sock \

-DDEFAULT_CHARSET=utf8 \

-DDEFAULT_COLLATION=utf8_general_ci \

-DWITH_EXTRA_CHARSETS:STRING=utf8,gbk \

-DWITH_INNOBASE_STORAGE_ENGINE=1 \

-DWITH_READLINE=1 \

-DENABLED_LOCAL_INFILE=1 \

-DMYSQL_DATADIR=/data/mysql/ \

-DMYSQL_USER=mysql \

-DMYSQL_TCP_PORT=3306

[[email protected] ~]# make && make install

mysql官网英文文档简单翻译说明一下

The MyISAM, MERGE, MEMORY, and CSV engines are mandatory (always compiled into the server) and need not be installed explicitly.（说明：mysql默认支持的数据库引擎有MyISAM, MERGE, MEMORY, CSV，无需在编译时再声明）

所以上面的编译条件省掉了如下两行

-DWITH_MYISAM_STORAGE_ENGINE=1 \

-DWITH_MEMORY_STORAGE_ENGINE=1 \

但INNODB一定要声明式安装，所以多了这一行

-DWITH_INNOBASE_STORAGE_ENGINE=1 \

查看mysql.mysql的用户及组是否存在

[[email protected] ~]# cat /etc/passwd |grep mysql

mysql:x:501:503::/home/mysql:/bin/bash

[[email protected] ~]# cat /etc/group |grep mysql

mysql:x:503:

不OK就执行以下两行命令（否则跳过这一步）

[[email protected] ~]# groupadd mysql                                          #添加mysql用户组

[[email protected] ~]# useradd mysql -g mysql -s /sbin/nologin        # 添加mysql用户

以下带红色字体的命令非常非常，必须要执行

[[email protected] ~]# cd /usr/local/mysql

[[email protected] ~]# chown mysql.mysql -R .                              #将mysql目录赋予mysql用户的执行权限

[[email protected] ~]# chown
mysql.mysql -R /data/mysql

[[email protected] ~]# cp
support-files/my-default.cnf /etc/my.cnf  #mysql配置文件

[[email protected] ~]# chmod 755 scripts/mysql_install_db              #赋予mysql_install_db执行权限

以下命令为mysql 启动及自启动配置

[[email protected] ~]# scripts/mysql_install_db  --user=mysql  --basedir=/usr/local/mysql --datadir=/data/mysql/

输出如下信息：

2013-12-12 13:58:23 25913 [Note] InnoDB: The InnoDB memory heap is disabled

2013-12-12 13:58:23 25913 [Note] InnoDB: Mutexes and rw_locks use GCC atomic builtins

2013-12-12 13:58:23 25913 [Note] InnoDB: Compressed tables use zlib 1.2.3

2013-12-12 13:58:23 25913 [Note] InnoDB: Using Linux native AIO

2013-12-12 13:58:23 25913 [Note] InnoDB: Not using CPU crc32 instructions

2013-12-12 13:58:23 25913 [Note] InnoDB: Initializing buffer pool, size = 128.0M

2013-12-12 13:58:23 25913 [Note] InnoDB: Completed initialization of buffer pool

2013-12-12 13:58:23 25913 [Note] InnoDB: The first specified data file ./ibdata1 did not exist: a new database to be created!

2013-12-12 13:58:23 25913 [Note] InnoDB: Setting file ./ibdata1 size to 12 MB

2013-12-12 13:58:23 25913 [Note] InnoDB: Database physically writes the file full: wait...

2013-12-12 13:58:23 25913 [Note] InnoDB: Setting log file ./ib_logfile101 size to 48 MB

2013-12-12 13:58:24 25913 [Note] InnoDB: Setting log file ./ib_logfile1 size to 48 MB

2013-12-12 13:58:24 25913 [Note] InnoDB: Renaming log file ./ib_logfile101 to ./ib_logfile0

2013-12-12 13:58:24 25913 [Warning] InnoDB: New log files created, LSN=45781

2013-12-12 13:58:24 25913 [Note] InnoDB: Doublewrite buffer not found: creating new

2013-12-12 13:58:24 25913 [Note] InnoDB: Doublewrite buffer created

2013-12-12 13:58:24 25913 [Note] InnoDB: 128 rollback segment(s) are active.

2013-12-12 13:58:24 25913 [Warning] InnoDB: Creating foreign key constraint system tables.

2013-12-12 13:58:24 25913 [Note] InnoDB: Foreign key constraint system tables created

2013-12-12 13:58:24 25913 [Note] InnoDB: Creating tablespace and datafile system tables.

2013-12-12 13:58:24 25913 [Note] InnoDB: Tablespace and datafile system tables created.

2013-12-12 13:58:24 25913 [Note] InnoDB: Waiting for purge to start

2013-12-12 13:58:24 25913 [Note] InnoDB: 5.6.15 started; log sequence number 0

2013-12-12 13:58:26 25913 [Note] Binlog end

2013-12-12 13:58:26 25913 [Note] InnoDB: FTS optimize thread exiting.

2013-12-12 13:58:26 25913 [Note] InnoDB: Starting shutdown...

2013-12-12 13:58:27 25913 [Note] InnoDB: Shutdown completed; log sequence number 1625977

OK

Filling help tables...2013-12-12 13:58:27 0 [Warning] TIMESTAMP with implicit DEFAULT value is deprecated. Please use --explicit_defaults_for_timestamp server option (see documentation for more
details).

2013-12-12 13:58:27 25936 [Note] InnoDB: The InnoDB memory heap is disabled

2013-12-12 13:58:27 25936 [Note] InnoDB: Mutexes and rw_locks use GCC atomic builtins

2013-12-12 13:58:27 25936 [Note] InnoDB: Compressed tables use zlib 1.2.3

2013-12-12 13:58:27 25936 [Note] InnoDB: Using Linux native AIO

2013-12-12 13:58:27 25936 [Note] InnoDB: Not using CPU crc32 instructions

2013-12-12 13:58:27 25936 [Note] InnoDB: Initializing buffer pool, size = 128.0M

2013-12-12 13:58:27 25936 [Note] InnoDB: Completed initialization of buffer pool

2013-12-12 13:58:27 25936 [Note] InnoDB: Highest supported file format is Barracuda.

2013-12-12 13:58:27 25936 [Note] InnoDB: 128 rollback segment(s) are active.

2013-12-12 13:58:27 25936 [Note] InnoDB: Waiting for purge to start

2013-12-12 13:58:27 25936 [Note] InnoDB: 5.6.15 started; log sequence number 1625977

2013-12-12 13:58:27 25936 [Note] Binlog end

2013-12-12 13:58:27 25936 [Note] InnoDB: FTS optimize thread exiting.

2013-12-12 13:58:27 25936 [Note] InnoDB: Starting shutdown...

2013-12-12 13:58:29 25936 [Note] InnoDB: Shutdown completed; log sequence number 1625987

OK

To start mysqld at boot time you have to copy

support-files/mysql.server to the right place for your system

PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER !

To do so, start the server, then issue the following commands:

/usr/local/mysql/bin/mysqladmin -u root password ‘new-password‘

/usr/local/mysql/bin/mysqladmin -u root -h ziteng26 password ‘new-password‘

Alternatively you can run:

/usr/local/mysql/bin/mysql_secure_installation

which will also give you the option of removing the test

databases and anonymous user created by default.  This is

strongly recommended for production servers.

See the manual for more instructions.

You can start the MySQL daemon with:

cd . ; /usr/local/mysql/bin/mysqld_safe &

You can test the MySQL daemon with mysql-test-run.pl

cd mysql-test ; perl mysql-test-run.pl

Please report any problems with the ./bin/mysqlbug script!

The latest information about MySQL is available on the web at

http://www.mysql.com

Support MySQL by buying support/licenses at http://shop.mysql.com

New default config file was created as /usr/local/mysql/my.cnf and

will be used by default by the server when you start it.

You may edit this file to change server settings

WARNING: Default config file /etc/my.cnf exists on the system

This file will be read by default by the MySQL server

If you do not want to use this, either remove it, or use the

--defaults-file argument to mysqld_safe when starting the server

[[email protected] ~]# cp support-files/mysql.server /etc/init.d/mysqld

[[email protected] ~]# chmod 755 /etc/init.d/mysqld

查看mysqld服务是否设置为开机启动

[[email protected] ~]# chkconfig --list|grep mysqld

设置为开机启动

[[email protected] ~]# chkconfig mysqld on

启动mysql数据库，会输出一系列有用的信息，告诉你接下去如何初始化mysql

[[email protected]CentOS mysql]#
service mysqld start

按照上述英文，我们来初始化管理员root的密码

[[email protected] ~]# /usr/local/mysql/bin/mysqladmin -u root password ‘yourpassword‘

此处yourpassword设置为 manager

众所周知，mysql有两种帐号类型，即localhost和%，前者限本机连接mysql，后者可用于其它机器远程连接mysql

最后，处理帐号登录问题，让root帐号密码可以本地和远程连接使用

[[email protected] ~]# /usr/local/mysql/bin/mysql -u root -p         #敲入该命令后，屏幕会提示输入密码，输入上一步设置的yourpassword

删除root密码为空的记录

mysql> use mysql;

mysql> delete from user where password=‘‘;

mysql> flush privileges;

配置mysql允许root远程登录                                  #登录

mysql> grant all privileges on *.* to [email protected]‘%‘ identified by "manager";

mysql> flush privileges;

mysql> select User,Password,Host from user;

上述命令如果执行成功

mysql> quit

至此，mysql安装已经全部结束.

原文摘自：http://blog.sina.com.cn/s/blog_53decf440101qiv0.html

时间： 2024-10-11 22:28:40

Centos6 源码部署MySQL5.6的相关文章

Centos6 源码安装mysql5.6

这里介绍如何使用centos6.*来安装mysql5.6版本. 先做一下准备工作 确定好用于运行mysql的用户,安全起见,建议拒绝次用户登录,仅用于运行程序. useradd mysql -s/sbin/nologin 如果电脑的物理内存不是很多(1G以下),可以开启虚拟内存来缓解物理内存压力,避免应为内存的问题安装失败,或许也可以轻微的提升速度. mkdir /myswap  #创建一个swap文件 dd if=/dev/zero of=/myswap bs=1k count=2048000

Centos6 源码安装mysql5.5

一.工具 cmake-3.0.1.tar.gz   mysql-5.5.35.tar.gz 二.安装部署 1.安装cmake tar -zxvf cmake-3.0.1.tar.gz cd cmake-3.0.1 ./configure make && make install 2.新建mysql用户 groupadd mysql useradd -r -g mysql mysql mkdir -p /usr/local/mysql     //mysql安装目录 mkdir -p /ap

CentOS-6.4-minimal版中源码安装MySQL-5.5.38

/** * CentOS-6.4-minimal版中源码安装MySQL-5.5.38 * ---------------------------------------------------------------------------------------------------------------------- * 三种安装方式 * 1)源码安装 * 2)二进制包安装 * 3)rpm或yum安装 * 本文演示的是源码安装,并且,从mysql-5.5开始,源码安装要通过cmake安装

源码安装mysql5.6.20&&mysql主从设置（多实例做多个主从）

一.源码安装mysql5.6.20 1.编译环境安装 yum install wget gcc* make openssl openssl-devel openssl-clients -y && yum groupinstall "Development Libraries" -y 2.源码下载(软件见Linux部署源码包) wget -P /usr/local/src/ http://cdn.mysql.com/Downloads/MySQL-5.6/mysql-5.

Linux下源码安装Mysql5.5

本文主要介绍了如何在源码安装mysql5.5,所用系统为CentOS6.5 一.安装相应的开发环境 yum install -y ncurses-devel yum install -y libaio yum install -y bison yum install -y gcc-c++ yum install -y openssl-devel 二.安装cmake 跨平台编译器 # tar xf cmake-2.8.8.tar.gz # cd cmake-2.8.8 # ./bootstrap

CloudStack 4.3 源码部署+eclipse远程调试

CloudStack 4.3 源码部署 系统环境 vmware workstation 下创建一个虚拟机 装有Centos6.5  64bit 安装软件 1.yum install git mysql mysql-server mkisofs gcc python MySQL-python openssh-clients wget 2.下载maven 并解压到 /root/maven 目录 3.下载ant 并解压到 /root/ant 目录 4.下载sun jdk 7 并解压到 /root/jd

JForum 2.19源码部署到eclipse

前两天在研究免费论坛,通过oschina和相关的文档查阅,最终选择了jforum,首先他是java写的,其次方便二次开发,而且有些论坛的源码都已经不在维护了,jforum最近几个月还是有更新的,但是从官网下载了zip版本和源码,zip版本部署到web容器中是可以正常运行的,并且配置成功(本人使用的mysql5.6+tomcat7)配置过程中遇到问题如下: 1.脚本错误,首先在脚本中事务的方式,TYPE应该改成ENGINE,其次通过和oracle脚本的对比发现有的脚本少字段,具体的修改结果见附件

MYSQL Study案例之--RedHat EL55源码安装Mysql-5.6

MYSQL  Study案例之--RedHat EL55源码安装Mysql-5.6 系统环境: 操作系统:RedHat EL55 DB Soft:  Mysql 5.6.4-m7 1.系统环境 [[email protected] Packages]# uname -a Linux rh6 2.6.18-194.el5.xen #1 SMP Tue Jan 29 11:47:41 EST 2013 i386 i686 GNU/Linux [[email protected] Packages]#

CentOS 6.5 源码安装MySQL5.6

CentOS 6.5 源码安装MySQL5.6 1:下载安装cmake (mysql5.5以后是通过cmake来编译的) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 #http://download.csdn.net/detail/csxuedn/7976005 #wget http://www.cmake.org/files/v2.8/cmake-2.8.5.tar.gz # tar -zxv -f /root/cmake-2.8.4.tar.gz