nomachine支持包括Windows、Mac、Linux平台,下载地址为:
https://www.nomachine.com/download/download&id=12
安装好nomachine_4.6.4_13_x86_64.rpm后,如果需要NX客户端连接nxserver服务器,那么“nxserver”服务必须打开,且保证没有防火墙之类的阻碍(关闭防火墙;设置足够的访问策略)
[root@DatabaseLogic software]# service iptables status
表格:filter
Chain INPUT (policy ACCEPT)
num target prot opt source destination
Chain FORWARD (policy ACCEPT)
num target prot opt source destination
Chain OUTPUT (policy ACCEPT)
num target prot opt source destination
[root@DatabaseLogic software]# service iptables stop
iptables:将链设置为政策 ACCEPT:filter [确定]
iptables:清除防火墙规则: [确定]
iptables:正在卸载模块: [确定]
[root@DatabaseLogic software]# service iptables status
iptables:未运行防火墙。
[root@DatabaseLogic software]# getenforce
Disabled
[root@DatabaseLogic software]#
[root@DatabaseLogic software]# service nxserver status
NX> 161 Enabled service: nxserver.
NX> 161 Enabled service: nxnode.
NX> 161 Enabled service: nxd.
[root@DatabaseLogic software]#
[root@DatabaseLogic software]# netstat -tupln | grep --color "/nx"
tcp 0 0 127.0.0.1:24088 0.0.0.0:* LISTEN 20307/nxserver.bin
tcp 0 0 127.0.0.1:7001 0.0.0.0:* LISTEN 20334/nxnode.bin
tcp 0 0 0.0.0.0:4000 0.0.0.0:* LISTEN 20315/nxd
tcp 0 0 127.0.0.1:12001 0.0.0.0:* LISTEN 20334/nxnode.bin
tcp 0 0 127.0.0.1:20001 0.0.0.0:* LISTEN 20314/nxserver.bin
tcp 0 0 127.0.0.1:25001 0.0.0.0:* LISTEN 20364/nxclient.bin
tcp 0 0 ::1:7001 :::* LISTEN 20334/nxnode.bin
tcp 0 0 :::4000 :::* LISTEN 20315/nxd
udp 4584 0 192.168.242.1:5353 0.0.0.0:* 20307/nxserver.bin
udp 4584 0 192.168.58.1:5353 0.0.0.0:* 20307/nxserver.bin
udp 18336 0 168.0.1.213:5353 0.0.0.0:* 20307/nxserver.bin
udp 0 0 0.0.0.0:5353 0.0.0.0:* 20307/nxserver.bin
[root@DatabaseLogic software]#
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 |
[root@DatabaseLogic software]# service iptables status 表格:filter Chain INPUT (policy ACCEPT) num target prot opt source destination Chain FORWARD (policy ACCEPT) num target prot opt source destination Chain OUTPUT (policy ACCEPT) num target prot opt source destination [root@DatabaseLogic software]# service iptables stop iptables:将链设置为政策 ACCEPT:filter [确定] iptables:清除防火墙规则: [确定] iptables:正在卸载模块: [确定] [root@DatabaseLogic software]# service iptables status iptables:未运行防火墙。 [root@DatabaseLogic software]# getenforce Disabled [root@DatabaseLogic software]# [root@DatabaseLogic software]# service nxserver status NX> 161 Enabled service: nxserver. NX> 161 Enabled service: nxnode. NX> 161 Enabled service: nxd. [root@DatabaseLogic software]# [root@DatabaseLogic software]# netstat -tupln | grep --color "/nx" tcp 0 0 127.0.0.1:24088 0.0.0.0:* LISTEN 20307/nxserver.bin tcp 0 0 127.0.0.1:7001 0.0.0.0:* LISTEN 20334/nxnode.bin tcp 0 0 0.0.0.0:4000 0.0.0.0:* LISTEN 20315/nxd tcp 0 0 127.0.0.1:12001 0.0.0.0:* LISTEN 20334/nxnode.bin tcp 0 0 127.0.0.1:20001 0.0.0.0:* LISTEN 20314/nxserver.bin tcp 0 0 127.0.0.1:25001 0.0.0.0:* LISTEN 20364/nxclient.bin tcp 0 0 ::1:7001 :::* LISTEN 20334/nxnode.bin tcp 0 0 :::4000 :::* LISTEN 20315/nxd udp 4584 0 192.168.242.1:5353 0.0.0.0:* 20307/nxserver.bin udp 4584 0 192.168.58.1:5353 0.0.0.0:* 20307/nxserver.bin udp 18336 0 168.0.1.213:5353 0.0.0.0:* 20307/nxserver.bin udp 0 0 0.0.0.0:5353 0.0.0.0:* 20307/nxserver.bin [root@DatabaseLogic software]# |
二、客户端的NX配置。