centos6.5 mysql开机启动

可参考:centos6.5 nginx开机启动

/etc/init.d/下添加mysqld文件,内容如下:

#!/bin/sh
# Copyright Abandoned 1996 TCX DataKonsult AB & Monty Program KB & Detron HB
# This file is public domain and comes with NO WARRANTY of any kind

# MySQL daemon start/stop script.

# Usually this is put in /etc/init.d (at least on machines SYSV R4 based
# systems) and linked to /etc/rc3.d/S99mysql and /etc/rc0.d/K01mysql.
# When this is done the mysql server will be started when the machine is
# started and shut down when the systems goes down.

# Comments to support chkconfig on RedHat Linux
# chkconfig: 2345 64 36
# description: A very fast and reliable SQL database engine.

# Comments to support LSB init script conventions
### BEGIN INIT INFO
# Provides: mysql
# Required-Start: $local_fs $network $remote_fs
# Should-Start: ypbind nscd ldap ntpd xntpd
# Required-Stop: $local_fs $network $remote_fs
# Default-Start:  2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: start and stop MySQL
# Description: MySQL is a very fast and reliable SQL database engine.
### END INIT INFO

# If you install MySQL on some other places than /usr/local/mysql, then you
# have to do one of the following things for this script to work:
#
# - Run this script from within the MySQL installation directory
# - Create a /etc/my.cnf file with the following information:
#   [mysqld]
#   basedir=<path-to-mysql-installation-directory>
# - Add the above to any other configuration file (for example ~/.my.ini)
#   and copy my_print_defaults to /usr/bin
# - Add the path to the mysql-installation-directory to the basedir variable
#   below.
#
# If you want to affect other MySQL variables, you should make your changes
# in the /etc/my.cnf, ~/.my.cnf or other MySQL configuration files.

# If you change base dir, you must also change datadir. These may get
# overwritten by settings in the MySQL configuration files.

#basedir=
#datadir=
basedir=/usr/local/mysql/
datadir=/usr/local/mysqldata/

# Default value, in seconds, afterwhich the script should timeout waiting
# for server start.
# Value here is overriden by value in my.cnf.
# 0 means don‘t wait at all
# Negative numbers mean to wait indefinitely
service_startup_timeout=900

# Lock directory for RedHat / SuSE.
lockdir=‘/var/lock/subsys‘
lock_file_path="$lockdir/mysql"

# The following variables are only set for letting mysql.server find things.

# Set some defaults
mysqld_pid_file_path=
if test -z "$basedir"
then
  basedir=/usr/local/mysql
  bindir=/usr/local/mysql/bin
  if test -z "$datadir"
  then
    datadir=/usr/local/mysql/data
  fi
  sbindir=/usr/local/mysql/bin
  libexecdir=/usr/local/mysql/bin
else
  bindir="$basedir/bin"
  if test -z "$datadir"
  then
    datadir="$basedir/data"
  fi
  sbindir="$basedir/sbin"
  libexecdir="$basedir/libexec"
fi

# datadir_set is used to determine if datadir was set (and so should be
# *not* set inside of the --basedir= handler.)
datadir_set=

#
# Use LSB init script functions for printing messages, if possible
#
lsb_functions="/lib/lsb/init-functions"
if test -f $lsb_functions ; then
  . $lsb_functions
else
  log_success_msg()
  {
    echo " SUCCESS! [email protected]"
  }
  log_failure_msg()
  {
    echo " ERROR! [email protected]"
  }
fi

PATH="/sbin:/usr/sbin:/bin:/usr/bin:$basedir/bin"
export PATH

mode=$1    # start or stop

[ $# -ge 1 ] && shift

other_args="$*"   # uncommon, but needed when called from an RPM upgrade action
           # Expected: "--skip-networking --skip-grant-tables"
           # They are not checked here, intentionally, as it is the resposibility
           # of the "spec" file author to give correct arguments only.

case `echo "testing\c"`,`echo -n testing` in
    *c*,-n*) echo_n=   echo_c=     ;;
    *c*,*)   echo_n=-n echo_c=     ;;
    *)       echo_n=   echo_c=‘\c‘ ;;
esac

parse_server_arguments() {
  for arg do
    case "$arg" in
      --basedir=*)  basedir=`echo "$arg" | sed -e ‘s/^[^=]*=//‘`
                    bindir="$basedir/bin"
            if test -z "$datadir_set"; then
              datadir="$basedir/data"
            fi
            sbindir="$basedir/sbin"
            libexecdir="$basedir/libexec"
        ;;
      --datadir=*)  datadir=`echo "$arg" | sed -e ‘s/^[^=]*=//‘`
            datadir_set=1
    ;;
      --pid-file=*) mysqld_pid_file_path=`echo "$arg" | sed -e ‘s/^[^=]*=//‘` ;;
      --service-startup-timeout=*) service_startup_timeout=`echo "$arg" | sed -e ‘s/^[^=]*=//‘` ;;
    esac
  done
}

wait_for_pid () {
  verb="$1"           # created | removed
  pid="$2"            # process ID of the program operating on the pid-file
  pid_file_path="$3" # path to the PID file.

  i=0
  avoid_race_condition="by checking again"

  while test $i -ne $service_startup_timeout ; do

    case "$verb" in
      ‘created‘)
        # wait for a PID-file to pop into existence.
        test -s "$pid_file_path" && i=‘‘ && break
        ;;
      ‘removed‘)
        # wait for this PID-file to disappear
        test ! -s "$pid_file_path" && i=‘‘ && break
        ;;
      *)
        echo "wait_for_pid () usage: wait_for_pid created|removed pid pid_file_path"
        exit 1
        ;;
    esac

    # if server isn‘t running, then pid-file will never be updated
    if test -n "$pid"; then
      if kill -0 "$pid" 2>/dev/null; then
        :  # the server still runs
      else
        # The server may have exited between the last pid-file check and now.
        if test -n "$avoid_race_condition"; then
          avoid_race_condition=""
          continue  # Check again.
        fi

        # there‘s nothing that will affect the file.
        log_failure_msg "The server quit without updating PID file ($pid_file_path)."
        return 1  # not waiting any more.
      fi
    fi

    echo $echo_n ".$echo_c"
    i=`expr $i + 1`
    sleep 1

  done

  if test -z "$i" ; then
    log_success_msg
    return 0
  else
    log_failure_msg
    return 1
  fi
}

# Get arguments from the my.cnf file,
# the only group, which is read from now on is [mysqld]
if test -x ./bin/my_print_defaults
then
  print_defaults="./bin/my_print_defaults"
elif test -x $bindir/my_print_defaults
then
  print_defaults="$bindir/my_print_defaults"
elif test -x $bindir/mysql_print_defaults
then
  print_defaults="$bindir/mysql_print_defaults"
else
  # Try to find basedir in /etc/my.cnf
  conf=/etc/my.cnf
  #conf=/data/mysql/mysql3306/my.cnf
  print_defaults=
  if test -r $conf
  then
    subpat=‘^[^=]*basedir[^=]*=\(.*\)$‘
    dirs=`sed -e "/$subpat/!d" -e ‘s//\1/‘ $conf`
    for d in $dirs
    do
      d=`echo $d | sed -e ‘s/[     ]//g‘`
      if test -x "$d/bin/my_print_defaults"
      then
        print_defaults="$d/bin/my_print_defaults"
        break
      fi
      if test -x "$d/bin/mysql_print_defaults"
      then
        print_defaults="$d/bin/mysql_print_defaults"
        break
      fi
    done
  fi

  # Hope it‘s in the PATH ... but I doubt it
  test -z "$print_defaults" && print_defaults="my_print_defaults"
fi

#
# Read defaults file from ‘basedir‘.   If there is no defaults file there
# check if it‘s in the old (depricated) place (datadir) and read it from there
#

extra_args=""
if test -r "$basedir/my.cnf"
then
  extra_args="-e $basedir/my.cnf"
else
  if test -r "$datadir/my.cnf"
  then
    extra_args="-e $datadir/my.cnf"
  fi
fi

parse_server_arguments `$print_defaults $extra_args mysqld server mysql_server mysql.server`

#
# Set pid file if not given
#
if test -z "$mysqld_pid_file_path"
then
  mysqld_pid_file_path=$datadir/`hostname`.pid
else
  case "$mysqld_pid_file_path" in
    /* ) ;;
    * )  mysqld_pid_file_path="$datadir/$mysqld_pid_file_path" ;;
  esac
fi

case "$mode" in
  ‘start‘)
    # Start daemon

    # Safeguard (relative paths, core dumps..)
    cd $basedir

    echo $echo_n "Starting MySQL"
    if test -x $bindir/mysqld_safe
    then
      # Give extra arguments to mysqld with the my.cnf file. This script
      # may be overwritten at next upgrade.
      $bindir/mysqld_safe --datadir="$datadir" --pid-file="$mysqld_pid_file_path" $other_args >/dev/null 2>&1 &
      wait_for_pid created "$!" "$mysqld_pid_file_path"; return_value=$?

      # Make lock for RedHat / SuSE
      if test -w "$lockdir"
      then
        touch "$lock_file_path"
      fi

      exit $return_value
    else
      log_failure_msg "Couldn‘t find MySQL server ($bindir/mysqld_safe)"
    fi
    ;;

  ‘stop‘)
    # Stop daemon. We use a signal here to avoid having to know the
    # root password.

    if test -s "$mysqld_pid_file_path"
    then
      # signal mysqld_safe that it needs to stop
      touch "$mysqld_pid_file_path.shutdown"

      mysqld_pid=`cat "$mysqld_pid_file_path"`

      if (kill -0 $mysqld_pid 2>/dev/null)
      then
        echo $echo_n "Shutting down MySQL"
        kill $mysqld_pid
        # mysqld should remove the pid file when it exits, so wait for it.
        wait_for_pid removed "$mysqld_pid" "$mysqld_pid_file_path"; return_value=$?
      else
        log_failure_msg "MySQL server process #$mysqld_pid is not running!"
        rm "$mysqld_pid_file_path"
      fi

      # Delete lock for RedHat / SuSE
      if test -f "$lock_file_path"
      then
        rm -f "$lock_file_path"
      fi
      exit $return_value
    else
      log_failure_msg "MySQL server PID file could not be found!"
    fi
    ;;

  ‘restart‘)
    # Stop the service and regardless of whether it was
    # running or not, start it again.
    if $0 stop  $other_args; then
      $0 start $other_args
    else
      log_failure_msg "Failed to stop running server, so refusing to try to start."
      exit 1
    fi
    ;;

  ‘reload‘|‘force-reload‘)
    if test -s "$mysqld_pid_file_path" ; then
      read mysqld_pid <  "$mysqld_pid_file_path"
      kill -HUP $mysqld_pid && log_success_msg "Reloading service MySQL"
      touch "$mysqld_pid_file_path"
    else
      log_failure_msg "MySQL PID file could not be found!"
      exit 1
    fi
    ;;
  ‘status‘)
    # First, check to see if pid file exists
    if test -s "$mysqld_pid_file_path" ; then
      read mysqld_pid < "$mysqld_pid_file_path"
      if kill -0 $mysqld_pid 2>/dev/null ; then
        log_success_msg "MySQL running ($mysqld_pid)"
        exit 0
      else
        log_failure_msg "MySQL is not running, but PID file exists"
        exit 1
      fi
    else
      # Try to find appropriate mysqld process
      mysqld_pid=`pidof $libexecdir/mysqld`

      # test if multiple pids exist
      pid_count=`echo $mysqld_pid | wc -w`
      if test $pid_count -gt 1 ; then
        log_failure_msg "Multiple MySQL running but PID file could not be found ($mysqld_pid)"
        exit 5
      elif test -z $mysqld_pid ; then
        if test -f "$lock_file_path" ; then
          log_failure_msg "MySQL is not running, but lock file ($lock_file_path) exists"
          exit 2
        fi
        log_failure_msg "MySQL is not running"
        exit 3
      else
        log_failure_msg "MySQL is running but PID file could not be found"
        exit 4
      fi
    fi
    ;;
    *)
      # usage
      basename=`basename "$0"`
      echo "Usage: $basename  {start|stop|restart|reload|force-reload|status}  [ MySQL server options ]"
      exit 1
    ;;
esac

exit 0

添加执行权限

chmod +x /etc/init.d/mysqld

添加到服务

chkconfig --add mysqld

设置开机启动

chkconfig mysqld on
时间: 2024-11-05 22:37:51

centos6.5 mysql开机启动的相关文章

centos 7 上配置mysql 开机启动详解

之前多次在centos7环境下配置mysql开机自启动出现了错误.现留下篇文章已做记录 一.centos7与centos6相比有什么不同: 1 在centos7中服务不在是用service这个命令来启动与停止,也不再用chkconfig来设置开机启动与否! 在centos7中所有对服务的管理都集中到了systemctl当中:systemctl不再是合之前一样依赖/etc/init.d/下 的脚本,它是通过配置文件来完成对服务的管理的: 二.创建systemctl管理mysql的配置文件: 1 创

centos6.5 tomcat开机启动

可参考:centos6.5 nginx开机启动 /etc/init.d/下添加tomcatd文件,内容如下: #!/bin/sh # # chkconfig: - 80 20 # # Licensed to the Apache Software Foundation (ASF) under one or more # contributor license agreements. See the NOTICE file distributed with # this work for addi

mysql开机启动

安装MySQL后,默认开机时不会自动启动,需要手动设置MySQL让它开机自启动. 首先,通过chkconfig命令看看MySQL在不在可管理的列表中,命令是: chkconfig --list messagebus         0:off    1:off    2:on    3:on    4:on    5:on    6:offmysqld                  0:off    1:off    2:off    3:off    4:off    5:off    6

Debian - 设置MYSQL开机启动

设置MYSQL 首先拷贝mysql.server到/etc/init.d目录下命名为mysql # cp /自己的安装目录/mysql/share/mysql/mysql.server /etc/init.d/mysql 然后进入/etc/rc2.d目录,这是debian默认的启动级别.建立连接指向/etc/init.d/mysql # cd /etc/rc2.d # ln -s /etc/init.d/mysql S20mysql 重新启动系统后,mysql就自动启动了. 也就是说, 删除/e

Linux 设置mysql开机启动

linux开启启动的程序一般放在/etc/rc.d/init.d/里面,/etc/init.d/是其软连接 mysql设为linux服务 cp /usr/local/mysql5/share/mysql/mysql.server /etc/init.d/mysqld chkconfig --add mysqld chkconfig --level 2345 mysqld on chown mysql:mysql -R /usr/local/mysql5/ service mysqld start

Linux中 设置apache,mysql 开机启动

linux开启启动的程序一般放在/etc/rc.d/init.d/里面,/etc/init.d/是其软连接 mysql设为linux服务 cp /usr/local/mysql5/share/mysql/mysql.server /etc/init.d/mysqldchkconfig --add mysqldchkconfig --level 2345 mysqld onchown mysql:mysql -R /usr/local/mysql5/service mysqld start apa

centos6.5 nginx开机启动

/etc/init.d/下添加nginxd文件,内容如下: #!/bin/bash # #chkconfig: - 85 15 #description: Nginx is a World Wide Web server. #processname: nginx nginx=/usr/local/nginx/nginx conf=/usr/local/nginx/nginx.conf case $1 in start) echo -n "Starting Nginx" $nginx -

Mysql开机启动,CentOS6.5

使用chkconfig命令,步骤如下: 将服务文件拷贝到init.d下,并重命名为mysql cp /usr/local/mysql/support-files/mysql.server /etc/init.d/mysql 赋予可执行权 chmod +x /etc/init.d/mysql 添加服务 chkconfig --add mysql 显示服务列表 chkconfig --list 结果如下图: 可重启验证是否成功.

mac 下添加mysql开机启动

1.添加文件 touch  /Library/LaunchDaemons/com.mysql.mysql.plist 2.添加内容 <?xml version="1.0" encoding="UTF-8"?>   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd&quo