sc58x config

addip=set bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:
${hostname}:eth0:off                                                            
autoload=no                                                                     
baudrate=115200                                                                 
bootargs=root=/dev/mmcblk0p1 rw rootfstype=ext3 clkin_hz=(25000000) console=ttyS
C0 ,115200  earlyprintk mem=480M                                                
bootcmd=run ramboot                                                             
bootdelay=3                                                                     
dtbaddr=0x84000000                                                              
dtbfile=sc58x-ezkit-hpc.dtb                                                     
ethact=dwmac.3100e000                                                           
ethaddr=02:80:ad:20:31:e8                                                       
flashboot=setenv filesize 0;tftp ${loadaddr} ${ubootfile};if test $filesize -gt
0; then sf probe 2:1;sf erase 0 0x80000;sf write ${loadaddr} 0 ${filesize}; else
 echo Load ${ubootfile} fail!;fi                                                
flashmmc=mmc rescan;mmc erase 0 3800;tftp ${dtbaddr} ${dtbfile};mmc write ${dtba
ddr} 0 800;tftp ${loadaddr} ${kernelfile};mmc write ${loadaddr} 800 3000        
gatewayip=192.168.20.1                                                          
hostname="sc58x"                                                                
ipaddr=192.168.20.15                                                            
kernelfile=uImage                                                               
loadaddr=0x82000000                                                             
loads_echo=1                                                                    
mmcboot=mmc rescan;mmc read ${loadaddr} 800 3000;mmc read ${dtbaddr} 0 800;run r
amargs;run addip;bootm ${loadaddr} - ${dtbaddr}                                 
nc=set ncip ${serverip};set stdin nc;set stdout nc;set stderr nc                
netmask=255.255.255.0                                                           
nfsargs=set bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath},tcp,nfsver
s=3                                                                             
nfsboot=tftp ${loadaddr} ${nfsfile};run nfsargs;run addip;bootm                 
nfsfile=vmImage                                                                 
ramargs=set bootargs root=/dev/mmcblk0p1 rw rootfstype=ext3 clkin_hz=(25000000)
console=ttySC0 ,115200  earlyprintk mem=480M                                    
ramboot=tftp ${loadaddr} ${kernelfile};tftp ${dtbaddr} ${dtbfile};run ramargs;ru
n addip;bootm ${loadaddr} - ${dtbaddr}                                          
rootpath=/romfs                                                                 
sdboot=set bootargs root=/dev/mmcblk0p1 rw rootfstype=ext3 clkin_hz=(25000000) c
onsole=ttySC0 ,115200  earlyprintk mem=480M;ext4load mmc 0:1 ${loadaddr} ${kerne
lfile};ext4load mmc 0:1 ${dtbaddr} ${dtbfile};bootm ${loadaddr} - ${dtbaddr}    
serverip=192.168.20.209                                                         
stderr=serial                                                                   
stdin=serial                                                                    
stdout=serial                                                                   
ubootfile=u-boot.ldr

时间： 2024-11-24 21:31:22

sc58x config的相关文章

在Web.config或App.config中的添加自定义配置

.Net中的System.Configuration命名空间为我们在web.config或者app.config中自定义配置提供了完美的支持.最近看到一些项目中还在自定义xml文件做程序的配置,所以忍不住写一篇用系统自定义配置的随笔了. 如果你已经对自定义配置了如指掌,请忽略这篇文章.? 言归正传,我们先来看一个最简单的自定义配置 <?xml version="1.0" encoding="utf-8" ?> <configuration>

Web.Config文件详解

一).Web.Config是以XML文件规范存储,配置文件分为以下格式    1.配置节处理程序声明      特点: 位于配置文件的顶部,包含在<configSections>标志中.    2.特定应用程序配置      特点:  位于<appSetting>中. 可以定义应用程序的全局常量设置等信息.    3.配置节设置      特点:  位于<system.Web>节中,控制Asp.net运行时的行为.    4.配置节组      特点:  用<se

C#读写app.config中的数据

C#读写app.config中的数据 读语句: String str = ConfigurationManager.AppSettings["DemoKey"]; 写语句: Configuration cfa = ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.None); cfa.AppSettings.Settings["DemoKey"].Value = "DemoVa

鼠标键盘无法进入：(EE) config/hal: couldn’t initialise context: (null)

vi /var/log/Xorg.0.log 发现有一行:(EE) config/hal: couldn’t initialise context: (null) 在xorg.conf里面加上下面选项,问题解决: Section "ServerFlags" Option   "AllowEmptyInput"     "false" Option   "AutoAddDevices"      "false"

eclipse config 3 配置pydev

啥也不说了人生苦短,我用python 准备工作 sudo apt-get install python3-dev 如下操作 依次点击菜单 Help->Install New Software... 点击add 添加如下插件地址 http://pydev.org/updates 然后列出了两个插件 下面的PyDev Mylyn Integration 官网上说是一个任务或者应用程序生命周期管理的工具(Mylyn is the task and application lifecycle manag

【CentOS】sudo: Account expired or PAM config lacks an “account” section for sudo

root用户切换到nowsun_old(普通用户)下,nowsun_old用户执行:sudo -l会出现以下错误 [[email protected] ~]$ sudo -l [sudo] password for nowsun_old:  sudo: Account expired or PAM config lacks an "account" section for sudo, contact your system administrator 解决方法: 1.通过查看,发现no

MVC.Net：读取Web.config/App.config配置

需要读取Web.config/App.config的配置很简单,首先我们需要将配置写入到<appSettings>中,例如: <appSettings> <add key="thumbSize_weight" value="300"/> <add key="thumbSize_height" value="300"/> </appSettings> 读取配置语句(需要

app Token config

public class Config { private static final String TOKEN_KEY = "token"; private static final String APP_ID = "com.jiangcun.secret"; public static String getCacheToken(Context context){ return context.getSharedPreferences(APP_ID , Contex

C#有关的vshost、exe、config格式说明

vshost.exe.config是程序运行时的配置文本 exe.config是程序运行后会复制到vshost.exe.config app.config是在vshost.exe.config和exe.config没有情况起作用,从app.config复制到exe.config再复制到vshost.exe.config 写配置文件都是写到exe.config文件中了,app.config不会变化. app.config只在exe.config丢失的情况下在开发环境中重新加载app.config,