开放式（无密码）
配置思路：
- 配置基本配置
- 新建service-template
- 新建接口WLAN-BSS
- 在WLAN-Radio上调用service-template和WLAN-BSS
1.基本配置
新建vlan 10 、30
[H3C-Fat-AP]vlan 10 [H3C-Fat-AP-vlan10]quit [H3C-Fat-AP]vlan 19 [H3C-Fat-AP]vlan 30
配置vlan30IP为：10.10.19.20（管理IP）
[H3C-Fat-AP-vlan30]int vlan 30 [H3C-Fat-AP-Vlan-interface30]ip address10.10.19.20 255.255.255.0 [H3C-Fat-AP-Vlan-interface30]quit
设置默认路由
[H3C-Fat-AP]ip route-static 0.0.0.0 0.0.0.0 10.10.19.254
设置接口G1/0/1位trunk模式，允许所有vlan通过。
[H3C-Fat-AP]int GigabitEthernet 1/0/1 [H3C-Fat-AP-GigabitEthernet1/0/1]portlink-type trunk [H3C-Fat-AP-GigabitEthernet1/0/1]port trunkpermit vlan all Pleasewait........................................... Done.
2. 新建service-template，ssid设置test，并开启service-template
[H3C-Fat-AP]wlan service-template 5clear [H3C-Fat-AP-wlan-st-5]ssid test [H3C-Fat-AP-wlan-st-5]service-templateenable Please wait... Done. [H3C-Fat-AP-wlan-st-5]quit
3. 新建WLAN-BSS接口，设置vlan。
[H3C-Fat-AP]int WLAN-BSS 5 [H3C-Fat-AP-WLAN-BSS5]port acc vlan 10 [H3C-Fat-AP-WLAN-BSS5]quit [H3C-Fat-AP]int WLAN-BSS 6 [H3C-Fat-AP-WLAN-BSS6]port acc vlan 10 [H3C-Fat-AP-WLAN-BSS6]quit
4. 在WLAN-Radio上调用service-template和WLAN-BSS。
[H3C-Fat-AP]int WLAN-Radio 1/0/1 [H3C-Fat-AP-WLAN-Radio1/0/1]service-template5 interface WLAN-BSS 5
测试：
用手机连接test无线网，可以连接，并且访问网络正常。
查看连接的client：
[H3C-Fat-AP-WLAN-Radio1/0/1]dis wlan client Total Number of Clients : 1 Client Information SSID: test -------------------------------------------------------------------------------- MAC Address User Name APID/RID IP Address VLAN -------------------------------------------------------------------------------- f862-14d5-4f88 -NA- 1 /1 10.10.80.88 10 --------------------------------------------------------------------------------
时间： 2024-08-26 15:13:46