17 Go Slices: usage and internals

Go Slices: usage and internals

5 January 2011

Introduction

Go‘s slice type provides a convenient and efficient means of working with sequences of typed data. Slices are analogous to arrays in other languages, but have some unusual properties. This article will look at what slices are and how they are used.

Arrays

The slice type is an abstraction built on top of Go‘s array type, and so to understand slices we must first understand arrays.

An array type definition specifies a length and an element type. For example, the type [4]int represents an array of four integers. An array‘s size is fixed; its length is part of its type ([4]int and [5]int are distinct, incompatible types). Arrays can be indexed in the usual way, so the expression s[n] accesses the nth element, starting from zero.

var a [4]int
a[0] = 1
i := a[0]
// i == 1

Arrays do not need to be initialized explicitly; the zero value of an array is a ready-to-use array whose elements are themselves zeroed:

// a[2] == 0, the zero value of the int type

The in-memory representation of [4]int is just four integer values laid out sequentially:

Go‘s arrays are values. An array variable denotes the entire array; it is not a pointer to the first array element (as would be the case in C). This means that when you assign or pass around an array value you will make a copy of its contents. (To avoid the copy you could pass a pointer to the array, but then that‘s a pointer to an array, not an array.) One way to think about arrays is as a sort of struct but with indexed rather than named fields: a fixed-size composite value.

An array literal can be specified like so:

b := [2]string{"Penn", "Teller"}

Or, you can have the compiler count the array elements for you:

b := [...]string{"Penn", "Teller"}

In both cases, the type of b is [2]string.

Slices

Arrays have their place, but they‘re a bit inflexible, so you don‘t see them too often in Go code. Slices, though, are everywhere. They build on arrays to provide great power and convenience.

The type specification for a slice is []T, where T is the type of the elements of the slice. Unlike an array type, a slice type has no specified length.

A slice literal is declared just like an array literal, except you leave out the element count:

letters := []string{"a", "b", "c", "d"}

A slice can be created with the built-in function called make, which has the signature,

func make([]T, len, cap) []T

where T stands for the element type of the slice to be created. The make function takes a type, a length, and an optional capacity. When called, make allocates an array and returns a slice that refers to that array.

var s []byte
s = make([]byte, 5, 5)
// s == []byte{0, 0, 0, 0, 0}

When the capacity argument is omitted, it defaults to the specified length. Here‘s a more succinct version of the same code:

s := make([]byte, 5)

The length and capacity of a slice can be inspected using the built-in len and cap functions.

len(s) == 5
cap(s) == 5

The next two sections discuss the relationship between length and capacity.

The zero value of a slice is nil. The len and cap functions will both return 0 for a nil slice.

A slice can also be formed by "slicing" an existing slice or array. Slicing is done by specifying a half-open range with two indices separated by a colon. For example, the expression b[1:4] creates a slice including elements 1 through 3 of b (the indices of the resulting slice will be 0 through 2).

b := []byte{‘g‘, ‘o‘, ‘l‘, ‘a‘, ‘n‘, ‘g‘}
// b[1:4] == []byte{‘o‘, ‘l‘, ‘a‘}, sharing the same storage as b

The start and end indices of a slice expression are optional; they default to zero and the slice‘s length respectively:

// b[:2] == []byte{‘g‘, ‘o‘}
// b[2:] == []byte{‘l‘, ‘a‘, ‘n‘, ‘g‘}
// b[:] == b

This is also the syntax to create a slice given an array:

x := [3]string{"Лайка", "Белка", "Стрелка"}
s := x[:] // a slice referencing the storage of x

Slice internals

A slice is a descriptor of an array segment. It consists of a pointer to the array, the length of the segment, and its capacity (the maximum length of the segment).

Our variable s, created earlier by make([]byte, 5), is structured like this:

The length is the number of elements referred to by the slice. The capacity is the number of elements in the underlying array (beginning at the element referred to by the slice pointer). The distinction between length and capacity will be made clear as we walk through the next few examples.

As we slice s, observe the changes in the slice data structure and their relation to the underlying array:

s = s[2:4]

Slicing does not copy the slice‘s data. It creates a new slice value that points to the original array. This makes slice operations as efficient as manipulating array indices. Therefore, modifying the elements (not the slice itself) of a re-slice modifies the elements of the original slice:

d := []byte{‘r‘, ‘o‘, ‘a‘, ‘d‘}
e := d[2:]
// e == []byte{‘a‘, ‘d‘}
e[1] = ‘m‘
// e == []byte{‘a‘, ‘m‘}
// d == []byte{‘r‘, ‘o‘, ‘a‘, ‘m‘}

Earlier we sliced s to a length shorter than its capacity. We can grow s to its capacity by slicing it again:

s = s[:cap(s)]

A slice cannot be grown beyond its capacity. Attempting to do so will cause a runtime panic, just as when indexing outside the bounds of a slice or array. Similarly, slices cannot be re-sliced below zero to access earlier elements in the array.

Growing slices (the copy and append functions)

To increase the capacity of a slice one must create a new, larger slice and copy the contents of the original slice into it. This technique is how dynamic array implementations from other languages work behind the scenes. The next example doubles the capacity of s by making a new slice, t, copying the contents of s into t, and then assigning the slice value t to s:

t := make([]byte, len(s), (cap(s)+1)*2) // +1 in case cap(s) == 0
for i := range s {
        t[i] = s[i]
}
s = t

The looping piece of this common operation is made easier by the built-in copy function. As the name suggests, copy copies data from a source slice to a destination slice. It returns the number of elements copied.

func copy(dst, src []T) int

The copy function supports copying between slices of different lengths (it will copy only up to the smaller number of elements). In addition, copy can handle source and destination slices that share the same underlying array, handling overlapping slices correctly.

Using copy, we can simplify the code snippet above:

t := make([]byte, len(s), (cap(s)+1)*2)
copy(t, s)
s = t

A common operation is to append data to the end of a slice. This function appends byte elements to a slice of bytes, growing the slice if necessary, and returns the updated slice value:

func AppendByte(slice []byte, data ...byte) []byte {
    m := len(slice)
    n := m + len(data)
    if n > cap(slice) { // if necessary, reallocate
        // allocate double what‘s needed, for future growth.
        newSlice := make([]byte, (n+1)*2)
        copy(newSlice, slice)
        slice = newSlice
    }
    slice = slice[0:n]
    copy(slice[m:n], data)
    return slice
}

One could use AppendByte like this:

p := []byte{2, 3, 5}
p = AppendByte(p, 7, 11, 13)
// p == []byte{2, 3, 5, 7, 11, 13}

Functions like AppendByte are useful because they offer complete control over the way the slice is grown. Depending on the characteristics of the program, it may be desirable to allocate in smaller or larger chunks, or to put a ceiling on the size of a reallocation.

But most programs don‘t need complete control, so Go provides a built-in append function that‘s good for most purposes; it has the signature

func append(s []T, x ...T) []T

The append function appends the elements x to the end of the slice s, and grows the slice if a greater capacity is needed.

a := make([]int, 1)
// a == []int{0}
a = append(a, 1, 2, 3)
// a == []int{0, 1, 2, 3}

To append one slice to another, use ... to expand the second argument to a list of arguments.

a := []string{"John", "Paul"}
b := []string{"George", "Ringo", "Pete"}
a = append(a, b...) // equivalent to "append(a, b[0], b[1], b[2])"
// a == []string{"John", "Paul", "George", "Ringo", "Pete"}

Since the zero value of a slice (nil) acts like a zero-length slice, you can declare a slice variable and then append to it in a loop:

// Filter returns a new slice holding only
// the elements of s that satisfy fn()
func Filter(s []int, fn func(int) bool) []int {
    var p []int // == nil
    for _, v := range s {
        if fn(v) {
            p = append(p, v)
        }
    }
    return p
}

A possible "gotcha"

As mentioned earlier, re-slicing a slice doesn‘t make a copy of the underlying array. The full array will be kept in memory until it is no longer referenced. Occasionally this can cause the program to hold all the data in memory when only a small piece of it is needed.

For example, this FindDigits function loads a file into memory and searches it for the first group of consecutive numeric digits, returning them as a new slice.

var digitRegexp = regexp.MustCompile("[0-9]+")

func FindDigits(filename string) []byte {
    b, _ := ioutil.ReadFile(filename)
    return digitRegexp.Find(b)
}

This code behaves as advertised, but the returned []byte points into an array containing the entire file. Since the slice references the original array, as long as the slice is kept around the garbage collector can‘t release the array; the few useful bytes of the file keep the entire contents in memory.

To fix this problem one can copy the interesting data to a new slice before returning it:

func CopyDigits(filename string) []byte {
    b, _ := ioutil.ReadFile(filename)
    b = digitRegexp.Find(b)
    c := make([]byte, len(b))
    copy(c, b)
    return c
}

A more concise version of this function could be constructed by using append. This is left as an exercise for the reader.

Further Reading

Effective Go contains an in-depth treatment of slices and arrays, and the Go language specification defines slices and their associated helper functions.

By Andrew Gerrand

Related articles

原文地址：https://www.cnblogs.com/kaid/p/9698488.html

时间： 2024-08-04 13:26:29

17 Go Slices: usage and internals的相关文章

Go Slices: usage and internals

Introduction Go's slice type provides a convenient and efficient means of working with sequences of typed data. Slices are analogous to arrays in other languages, but have some unusual properties. This article will look at what slices are and how the

18 A GIF decoder: an exercise in Go interfaces

A GIF decoder: an exercise in Go interfaces 25 May 2011 Introduction At the Google I/O conference in San Francisco on May 10, 2011, we announced that the Go language is now available on Google App Engine. Go is the first language to be made available

golang学习之旅：官方文档汇总

The Go Programming Language Specification:http://localhost:8080/ref/spec学习Constants.Variables.Types.Declarations.Built-in functions Effective Gohttp://localhost:8080/doc/effective_go.html学习Data.Concurrency,Data部分讲解了make和new的区别 The Go Memory Modelhttp

【GoLang笔记】实例分析GoLang built-in数据结构map的赋值引用行为

备注1:本文旨在介绍Go语言中map这个内置数据结构的引用行为,并用实例来说明如何避免这种引用行为带来的"副作用". 备注2:文末列出的参考资料均来自GoLang.org官方文档,需翻墙访问. 1. map internals map是go中内置的数据结构,关于其语法规则,可以查看language specification中这里的说明,或者查看Effective Go中关于Maps的说明,此处略过. map的底层是用hashmap实现的(底层hashmap源码路径为src/pkg/r

golang之array

golang使用array表示固定大小的数组,使用slice表示动态数组. package main import "fmt" func main() { var a = [5]int{2,3,5,7,11} fmt.Printf("type of array: %T\n", a) fmt.Printf("address of array: %p\n", &a) fmt.Printf("address of arrar[0]:

19 Error handling and Go

Error handling and Go 12 July 2011 Introduction If you have written any Go code you have probably encountered the built-in error type. Go code uses error values to indicate an abnormal state. For example, the os.Openfunction returns a non-nil error v

13 JSON-RPC: a tale of interfaces

JSON-RPC: a tale of interfaces 27 April 2010 Here we present an example where Go's interfaces made it easy to refactor some existing code to make it more flexible and extensible. Originally, the standard library's RPC package used a custom wire forma

22 Gobs of data

Gobs of data 24 March 2011 Introduction To transmit a data structure across a network or to store it in a file, it must be encoded and then decoded again. There are many encodings available, of course: JSON, XML, Google's protocol buffers, and more.

16 Go Concurrency Patterns: Timing out, moving on

Go Concurrency Patterns: Timing out, moving on 23 September 2010 Concurrent programming has its own idioms. A good example is timeouts. Although Go's channels do not support them directly, they are easy to implement. Say we want to receive from the c