CMake: Could NOT find PkgConfig

转自http://www.ogre3d.org/forums/viewtopic.php?f=22&t=78490

Looking for OGRE...
Could NOT find PkgConfig (missing:  PKG_CONFIG_EXECUTABLE)
Found Ogre Byatis (1.8.1)
Found OGRE: optimized;C:/OgreSDK/OgreSDK_vc10_v1-8-1/lib/release/OgreMain.lib;debug;C:/OgreSDK/OgreSDK_vc10_v1-8-1/lib/debug/OgreMain_d.lib
Looking for OGRE_Paging...
Found OGRE_Paging: optimized;C:/OgreSDK/OgreSDK_vc10_v1-8-1/lib/release/OgrePaging.lib;debug;C:/OgreSDK/OgreSDK_vc10_v1-8-1/lib/debug/OgrePaging_d.lib
Looking for OGRE_Terrain...
Found OGRE_Terrain: optimized;C:/OgreSDK/OgreSDK_vc10_v1-8-1/lib/release/OgreTerrain.lib;debug;C:/OgreSDK/OgreSDK_vc10_v1-8-1/lib/debug/OgreTerrain_d.lib
Looking for OGRE_Property...
Found OGRE_Property: optimized;C:/OgreSDK/OgreSDK_vc10_v1-8-1/lib/release/OgreProperty.lib;debug;C:/OgreSDK/OgreSDK_vc10_v1-8-1/lib/debug/OgreProperty_d.lib
Looking for OGRE_RTShaderSystem...
Found OGRE_RTShaderSystem: optimized;C:/OgreSDK/OgreSDK_vc10_v1-8-1/lib/release/OgreRTShaderSystem.lib;debug;C:/OgreSDK/OgreSDK_vc10_v1-8-1/lib/debug/OgreRTShaderSystem_d.lib
Looking for OIS...
Could NOT find PkgConfig (missing:  PKG_CONFIG_EXECUTABLE)
Found OIS: optimized;C:/OgreSDK/OgreSDK_vc10_v1-8-1/lib/release/OIS.lib;debug;C:/OgreSDK/OgreSDK_vc10_v1-8-1/lib/debug/OIS_d.lib
Configuring done

  

回答:

You are not supposed to use PkgConfig on Windows.

see http://www.freedesktop.org/wiki/Software/pkg-config/

The error is not really an error, it‘s an informative message. It‘s completely harmless. Please keep in mind that Ogre has many optional dependencies, you don‘t need to satisfy all of them.

HTH

  

时间: 2024-11-10 07:18:19

CMake: Could NOT find PkgConfig的相关文章

ORB SLAM2在Ubuntu 16.04上的运行配置

安装依赖 安装OpenGL 1. 安装opengl Library$sudo apt-get install libgl1-mesa-dev2. 安装opengl utility$sudo apt-get install libglu1-mesa-dev3. 安装opengl utility toolkit$sudo apt-get install freeglut3-dev 安装GLEW $sudo apt-get install libglew-dev 安装boost $sudo apt-g

Ubuntu14.04下安装OpenCV3.0经验

Jeremy Lin 不得不说OpenCV的安装是个坑,我差不多花了2天时间才搞定.第1遍我是在VMware的虚拟机上面安装的,结果很无奈的失败了.后来我用EasyBCD装了Win8.1和Ubuntu14.04的双系统来安装OpenCV3.0,不过一开始也是相当不顺利. 现在谈一下正确的安装方法: 前提:系统更新 sudo apt-get update sudo apt-get upgrade 我主要就是栽在这个坑上面,我是一安装完 Ubuntu 14.04.2 就开始安装 OpenCV3.0

Ubuntu16.04安装opencv for python/c++

Ubuntu16.04安装opencv for python/c++ 网上关于opencv的安装已经有了不少资料,但是没有一篇资料能让我一次性安装成功,因此花费了大量时间去解决各种意外,希望这篇能给一些人带去便利,节省时间. 1.安装OpenCV所需的库 1 sudo apt-get install build-essential 2 sudo apt-get install cmake git libgtk2.0-dev pkg-config libavcodec-dev libavforma

ubuntu16.04 安装配置matlab ,python ,cuda8.0,cudnn,opencv3.1的caffe环境

网络上有很多ubuntu上caffe配置环境的帖子,本人照着其中的许多进行了参考,都出现了或多或少的错误,很多地方也有差异. 于是自己整理了下自己的安装过程,成功进行了测试,跑通了faster-rcnn.配置环境时间为2017.1.4 系统ubuntu16.04 一:显卡驱动的安装: 由于要使用GPU,所以先要查看自己显卡所匹配的显卡驱动,网址:http://www.nvidia.com/Download/index.aspx%3Flang=en-us 选择电脑匹配的显卡驱动,本人电脑显卡为GT

虚拟机Ubuntu16,caffe环境搭建

虚拟机下的Ubuntu16.04+caffe+onlycup 官网的step很重要,要跟着官网,的步骤来:http://caffe.berkeleyvision.org/installation.html 然后对照:http://blog.csdn.net/firethelife/article/details/51926754 ======================[关于注意和报错]=================== ---------------------------------

ubuntu14.04 PCL1.8 OPENNI2.0 OPENCV3.0安装小结

最近入手NvidiaTegra 1 开发板,ARM架构的,做室内三维重建用.今天就讲讲的PCL 1.8+ OPENCV3.1 + OPENNI2.0在ubuntu14.04 上的安装与编译. 更新ubuntu的armhf源,修改source.list,中科大的快! deb http://mirrors.ustc.edu.cn/ubuntu-ports/ trusty main restricted universe multiverse deb http://mirrors.ustc.edu.c

ubuntu 14.04 64位 安装Opencv3.1.0 (包含opencv_contrib模块)

写在前边: 据官方说法,目前还不是太稳定的算法模块都在opencv_contrib里边,由于不稳定,所以不能在release版本里发行,只有在稳定以后才会放进release里边.但是这里边有很多我们经常要用的算法,比如SIFT,SURF等(在xfeatures2d 模块里边).官网提供了说明,可以把opencv_contrib扩展模块添加编译到已安装的opencv3.0.0里边,也可以安装的时候直接把扩展模块编译进去一并安装. 1.依赖关系: GCC 4.4.x or later CMake 2

ubuntu16.04+opencv3.1配置

#安装必要的依赖sudo apt-get install build-essential cmakesudo apt-get install cmake Git libgtk2.0-dev pkg-config libavcodec-dev libavformat-dev libswscale-dev #官方opencv3.1  http://OpenCV.org/downloads.html#或者到我云共享 http://pan.baidu.com/s/1c2HPNd2 unzip openc

ubuntu下opencv 3.0和python2.7安装测试

1.安装opencv所需的库(编译器.必须库.可选库) sudo apt-get install build-essential sudo apt-get install cmake git libgtk2.0-dev pkg-config libavcodec-dev libavformat-dev libswscale-dev sudo apt-get install python-dev python-numpy libtbb2 libtbb-dev libjpeg-dev libpng-