CentOS6.4 配置Tengine

1、安装Nginx所需的pcre-devel库

yum install -y gcc gcc-c++
wget ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-8.33.tar.gz
tar zxvf pcre-8.33.tar.gz
cd pcre-8.33./configure --prefix=/usr/local/pcre
makemake install

2、安装Tengine

yum install openssl openssl-devel
wget http://tengine.taobao.org/download/tengine-1.5.1.tar.gz
tar zxvf tengine-1.5.1.tar.gz
cd tengine-1.5.1
./configure --prefix=/usr/local/nginx --with-http_stub_status_module --with-pcre=/usr/local/pcre-8.33
make
make install

注意：--with-pcre=/usr/local/software/pcre-8.33 指定的是源码包解压的路径
3、配置Tengine

创建用户组和用户

groupadd www
useradd -g www www

编辑主配置文件

vi /usr/local/nginx/conf/nginx.conf

user www www;   #指定运行的用户和用户组
worker_processes  4;    #指定要开启的进程数，一般为CPU的核心数或两倍
error_log  logs/error.log  crit;        #全局日志 debug|info|notice|warn|error|crit
pid        logs/nginx.pid;      #指定进程id的存储文件位置
worker_rlimit_nofile 65535;

events {
    use epoll;  #对于Linux系统epoll工作模式是首选
    worker_connections  65536;  #每个进程的最大连接数
    #在执行操作系统命令"ulimit -n 65536"后worker_connections的设置才能生效
}

http {
    include       mime.types;
    default_type  application/octet-stream;
    log_format  main  ‘$remote_addr - $remote_user [$time_local] "$request" ‘
                      ‘$status $body_bytes_sent "$http_referer" ‘
                      ‘"$http_user_agent" "$http_x_forwarded_for"‘;
    access_log  logs/access.log  main;
    charset  utf-8;

    server_names_hash_bucket_size 256;
    client_header_buffer_size 32k;
    large_client_header_buffers 4 128k; #最大缓存为4个128KB
    client_max_body_size 20m;   #允许客户端请求的最大的单个文件字节数

    sendfile on;        #开启高效文件传输模式
    tcp_nopush on;      #用于防止网络阻塞
    tcp_nodelay on;     #用于防止网络阻塞

    keepalive_timeout  60;      #超过这个时间之后服务器会关闭该连接
    client_header_timeout 10;   #客户端请求头读取超时时间，超过这个时间客户端还没发数据NGINX就返回408错误
    client_body_timeout 10;     #客户端请求主体读取超时时间，超过这个时间客户端还没发数据NGINX就返回408错误

    server_tokens on;   #不显示nginx版本信息

    include gzip.conf;  #HttpGzip的配置文件
    include proxy.conf; #配置代理文件
    include vhost.conf; #虚拟主机的配置文件
    include backend.conf;       #配置后端的服务器列表文件

}

limit_req_zone $binary_remote_addr zone=req_one:10m rate=1r/s;
#10m是会话状态存储空间 rate=1r/s是每个地址每秒只能请求一次   （在vhost.conf还有配置）
limit_conn_zone $binary_remote_addr zone=req_one:10m;
#设置IP并发  （在vhost.conf还有配置）
编辑HttpGzip的配置文件

vi /usr/local/nginx/conf/gzip.conf

gzip on;
gzip_min_length 1k;     #设置允许压缩的页面最小字节数。
gzip_buffers 4 16k;     #用来存储gzip的压缩结果
gzip_http_version 1.1;  #识别HTTP协议版本
gzip_comp_level 2;      #设置gzip的压缩比 1-9 1压缩比最小但最快 9相反
gzip_types text/plain application/x-javascript text/css application/xml;        #指定压缩类型
gzip_proxied any;       #无论后端服务器的headers头返回什么信息，都无条件启用压缩
gzip_vary on;
gzip_disable "MSIE [1-6].";     #禁用IE6的gzip压缩

编辑代理文件

vi /usr/local/nginx/conf/proxy.conf

proxy_redirect off;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
client_body_buffer_size  512k;
proxy_connect_timeout 30;
proxy_read_timeout 30;
proxy_send_timeout 30;
proxy_buffer_size 32k;
proxy_buffers 4 64k;
proxy_busy_buffers_size 128k;

编辑虚拟主机的配置文件

vi /usr/local/nginx/conf/vhost.conf

server {
    listen 80;
    server_name localhost;
    index index.jsp index.htm index.html;
    root /usr/local/tomcat7/webapps/ROOT;

    location / {        proxy_pass http://backend;
        proxy_pass_header Set-Cookie;
    }

    location /NginxStatus {
        stub_status on;
        access_log off;
        auth_basic "NginxStatus";
    }
}

location ~ .*\.(zip|thumb)$ {
        root /usr/local/download;
　　  limit_conn req_one 1;    #IP下载并发为1  req_one在nginx.conf中配置的 limit_conn_zone $binary_remote_addr zone=req_one:10m;
        limit_rate 500k;        #限速500k
        expires 30d;
    }

limit_req zone=req_one burst=100; #req_one在nginx.conf中有配置,当超过rate时请求就会放到burst中burst也满了就503 req_one在nginx.conf中配置的 llimit_req_zone $binary_remote_addr zone=req_one:10m rate=100r/s;

limit_rate_after 3m;
limit_rate 512k;    这两句话的意思是先以最快的速度下载3MB，然后再以512KB的速度下载。

将扩展名为zip,thumb的静态文件都交给Nginx处理，root为静态文件的目录，而expires用为指定静态文件的过期时间30天。

location ~ ^/(upload|download)/ {
        root /usr/local;
        expires 30d;
}

将upload,download下的所有文件都交给Nginx处理，upload和download目录包含在/usr/local目录中

编辑后端的服务器列表文件

vi /usr/local/nginx/conf/backend.conf

upstream backend {
    ip_hash;
    server 127.0.0.1:8080 max_fails=1 fail_timeout=60s;
}

4、设置Tengine开机启动

vi /etc/rc.d/init.d/nginx 

#!/bin/bash
# Tengine Startup script# processname: nginx
# chkconfig: - 85 15
# description: nginx is a World Wide Web server. It is used to serve
# pidfile: /var/run/nginx.pid
# config: /usr/local/nginx/conf/nginx.conf
nginxd=/usr/local/nginx/sbin/nginx
nginx_config=/usr/local/nginx/conf/nginx.conf
nginx_pid=/usr/local/nginx/logs/nginx.pid
RETVAL=0
prog="nginx"
# Source function library.
. /etc/rc.d/init.d/functions
# Source networking configuration.
. /etc/sysconfig/network
# Check that networking is up.
[ ${NETWORKING} = "no" ] && exit 0
[ -x $nginxd ] || exit 0
# Start nginx daemons functions.
start() {
if [ -e $nginx_pid ];then
echo "tengine already running...."
exit 1
fi
echo -n $"Starting $prog: "
daemon $nginxd -c ${nginx_config}
RETVAL=$?
echo
[ $RETVAL = 0 ] && touch /var/lock/subsys/nginx
return $RETVAL
}
# Stop nginx daemons functions.
stop() {
echo -n $"Stopping $prog: "
killproc $nginxd
RETVAL=$?
echo
[ $RETVAL = 0 ] && rm -f /var/lock/subsys/nginx /usr/local/nginx/logs/nginx.pid
}
reload() {
echo -n $"Reloading $prog: "
#kill -HUP `cat ${nginx_pid}`
killproc $nginxd -HUP
RETVAL=$?
echo
}
# See how we were called.
case "$1" in
start)
start
;;
stop)
stop
;;
reload)
reload
;;
restart)
stop
start
;;

status)
status $prog
RETVAL=$?
;;
*)
echo $"Usage: $prog {start|stop|restart|reload|status|help}"
exit 1
esac
exit $RETVAL

保存退出

chmod 775 /etc/rc.d/init.d/nginx   #赋予文件执行权限
chkconfig  --level 012345 nginx on   #设置开机启动service nginx start

5、其他

原文地址：http://www.cnblogs.com/kgdxpr/p/3304747.html