SYMBDSNAP_SDK[3943]: Failed to open device: /dev/symbdsnapctl, errno: 2

在Linux的日志/var/log/message里面看到下面错误信息:

Oct 26 09:48:42 xxxxxxx SYMBDSNAP_SDK[3943]: Failed to open device: /dev/symbdsnapctl, errno: 2.

Google搜索了一下,发现出现这个错误的原因:

Advanced Open File Option for Linux (AOFO-L) is not supported for the use with the kernel version. (For details, please see NOTE below.)

NOTE:

"SymBDSnap" in messages is a driver name for AOFO-L.

The requisite to enable AOFO-L depends on the kernel versions rather than Linux OS versions.

Please refer to the following URL for the kernel version corresponding for each Red Hat release version, since the available kernel versions are not described in Software Compatibility List (SCL) for Backup Exec.

https://access.redhat.com/site/articles/3078

For instance:

Software Compatibility List (SCL) for Backup Exec 2012 says that AOFO-L is supported for the use with Red Hat 6 Update 1. Red Hat says that the kernel version for Red Hat 6 Update 1 is 2.6.32-131.0.15.

AOFO-L is supported for the use with 2.6.32-131.0.15 as a consequence. If the kernel version is 2.6.32-220 or later, AOFO-L is not supported as of 12 August 2013.

SymBDSnap是针对AOFO-L的设备名。
 

启用AOFO-L需要是相应内核版本的支持,而不是某些Linux版本。

 

请参考下面的URL,对比每个REDHAT版本相应的内核版本,

 

可知REDHAT使用的内核版本不再Backup Exec的兼容性列表中。

 

https://access.redhat.com/site/articles/3078

 

实例说明:

 

Backup Exec 2012软件兼容性列表中说Redhat 6 update 1支持 AOFO-L。 

 

Redhat说Redhat 6 update 1的内核版本是 2.6.32-131.0.15。

 

AOFO-L支持2.6.32-131.0.15内核版本。如果内核版本是

 

2.6.32-220或者更新的版本,AOFO-L在2013.8.12以后就不被支持了。

刚好出现错误的系版本为Oracle Linux Server release 5.7, 内核版本为 2.6.32-200.13.1.el5uek

$ cat /proc/version 
 

Linux version 2.6.32-200.13.1.el5uek ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-50)) #1 SMP Wed Jul 27 21:02:33 EDT 2011

所以出现了上述错误。不过可以忽略此消息。执行备份而无需使用AOFO L。

参考资料:

http://www.jianshu.com/p/b6585a501ca1

https://www.veritas.com/support/en_US/article.000018862

时间: 2025-01-05 17:18:43

SYMBDSNAP_SDK[3943]: Failed to open device: /dev/symbdsnapctl, errno: 2的相关文章

解决 vboxdrv.sh: failed: Cannot change group vboxusers for device /dev/vboxdrv.

来自:https://blog.csdn.net/su_cicada/article/details/86773043 virtualbox 报错 ,看提示让执行以下 sudo /sbin/vboxconfig 如果报错: vboxdrv.sh: failed: Cannot change group vboxusers for device /dev/vboxdrv. 那么应该是本用户没有加入vboxusers. 参考: https://ubuntuforums.org/archive/ind

Device "/dev/sdg" is not a partition【再续】

之前创建asm磁盘的时候总结过一下错误:http://blog.csdn.net/rhys_oracle/article/details/17029333 当今天情况是这样的.如下: 在使用openfiler通过iSCSI映射到本地,发现将整个磁盘创建为asm提示如下错误: [[email protected] iscsi]# /etc/init.d/oracleasm createdisk VOL1 /dev/sdh Marking disk "VOL1" as an ASM dis

mount: block device /dev/cdrom is write-protected, mounting read-only 解决方法

[[email protected] ~]# mount /dev/cdrom /mnt/cdrom/ mount: block device /dev/sr0 is write-protected, mounting read-only 虚拟机挂着光驱光驱时提示只读,用以下命令可解决该报错, mount -o remount,rw /dev/cdrom /mnt/cdrom 参考网址:http://blog.chinaunix.net/uid-30645967-id-5701870.html

使用华为U8860测试时出现“Unable to open log device '/dev/log/main': No such file or directory”

这是因为华为默认禁掉了log输出, 解决办法: 拨号: *#*#2846579#*#* 会显示工程菜单, Go to "ProjectMenu" -> "Background Setting" -> "Log Setting" Open "Log switch" and set it to ON. Open "Log level setting" and set the log level yo

RMAN备份失败之:mount: block device /dev/emcpowerc1 is write-protected, mounting read-only

今天再做巡检的时候发现有一台服务器的RMAN备份不正常,有一段时间没能正常备份了.检查了一下脚本,正常,定时任务列表也正常,再检查一下/var/log/cron的内容,也没有问题.尝试在该挂载点上创建一个1.txt文件的时候,发现有异常报出来了.内容为:mount: block device /dev/emcpowerc1 is write-protected, mounting read-only.原来是因为磁盘为只读状态,不可写入,导致了备份失败. 解决办法: umount /dev/emc

logcat 提示 Unable to open log device '/dev/log/main': No such file or directory

解决办法: Open: /system/etc/init.d/××× (not the same file on different ROMs, find the right file) Find the line that says: rm /dev/log/main Change the line to: # rm /dev/log/main (comments out the line, rm = remove, in case you were wondering) Save and r

btchr_open: failed to get hci dev[NULL]

移植8723BE的时候,在打开USB的时候,碰见没有权限打开/DEV/RTK_BTUSB 但是我发现里面的权限都够. 于是用dmesg 查看 看到了  btchr_open: failed to get hci dev[NULL] 还有进去驱动里面查看. 发现原来没有probe 也就是说设备已经加载了一个对应驱动了. 一个设备只能对应一个驱动. 于是就是BTUSB.KO的驱动卸载了. 就是就可以了.

Android开发调试Installation failed since the device possibly has stale dexed jars

今天写完代码运行时,出现了程序安装失败的对话框: Installation failed since the device possibly has stale dexed jars that don't match the current version (dexopt error). In order to proceed, you have to uninstall the existing application. WARNING: Uninstalling will remove th

Mount 挂载错误mount:block device /dev/sr0 is write – protected , mounting read-only

Mount 挂载错误mount:block device /dev/sr0 is write – protected , mounting read-only 安装虚拟机出现以下提示: mount:block device /dev/sr0 is write - protected , mounting read-only 说明系统光驱加载成功,因为光驱是只读的,所以提示write-protected,mounting read-only,sr0是光驱设备名, 通过以下命令: ll /dev/c