python3--open函数

open函数，该函数用于文件处理

操作文件时，一般需要经历如下步骤：

• 打开文件
• 操作文件

一、打开文件

文件句柄 = open(‘文件路径‘, ‘模式‘)

打开文件时，需要指定文件路径和以何等方式打开文件，打开后，即可获取该文件句柄，日后通过此文件句柄对该文件操作。

打开文件的模式有：

• r，只读模式（默认）。
• w，只写模式。【不可读；不存在则创建；存在则删除内容；】
• a，追加模式。【可读；   不存在则创建；存在则只追加内容；】

"+" 表示可以同时读写某个文件

• r+，可读写文件。【可读；可写；可追加】
• w+，写读
• a+，同a

"U"表示在读取时，可以将 \r \n \r\n自动转换成 \n （与 r 或 r+ 模式同使用）

• rU
• r+U

"b"表示处理二进制文件（如：FTP发送上传ISO镜像文件，linux可忽略，windows处理二进制文件时需标注）

• rb
• wb
• ab

二、操作

class file(object)
    def close(self): # real signature unknown; restored from __doc__
        关闭文件
        """
        close() -> None or (perhaps) an integer.  Close the file.

        Sets data attribute .closed to True.  A closed file cannot be used for
        further I/O operations.  close() may be called more than once without
        error.  Some kinds of file objects (for example, opened by popen())
        may return an exit status upon closing.
        """

    def fileno(self): # real signature unknown; restored from __doc__
        文件描述符
         """
        fileno() -> integer "file descriptor".

        This is needed for lower-level file interfaces, such os.read().
        """
        return 0    

    def flush(self): # real signature unknown; restored from __doc__
        刷新文件内部缓冲区
        """ flush() -> None.  Flush the internal I/O buffer. """
        pass

    def isatty(self): # real signature unknown; restored from __doc__
        判断文件是否是同意tty设备
        """ isatty() -> true or false.  True if the file is connected to a tty device. """
        return False

    def next(self): # real signature unknown; restored from __doc__
        获取下一行数据，不存在，则报错
        """ x.next() -> the next value, or raise StopIteration """
        pass

    def read(self, size=None): # real signature unknown; restored from __doc__
        读取指定字节数据
        """
        read([size]) -> read at most size bytes, returned as a string.

        If the size argument is negative or omitted, read until EOF is reached.
        Notice that when in non-blocking mode, less data than what was requested
        may be returned, even if no size parameter was given.
        """
        pass

    def readinto(self): # real signature unknown; restored from __doc__
        读取到缓冲区，不要用，将被遗弃
        """ readinto() -> Undocumented.  Don‘t use this; it may go away. """
        pass

    def readline(self, size=None): # real signature unknown; restored from __doc__
        仅读取一行数据
        """
        readline([size]) -> next line from the file, as a string.

        Retain newline.  A non-negative size argument limits the maximum
        number of bytes to return (an incomplete line may be returned then).
        Return an empty string at EOF.
        """
        pass

    def readlines(self, size=None): # real signature unknown; restored from __doc__
        读取所有数据，并根据换行保存值列表
        """
        readlines([size]) -> list of strings, each a line from the file.

        Call readline() repeatedly and return a list of the lines so read.
        The optional size argument, if given, is an approximate bound on the
        total number of bytes in the lines returned.
        """
        return []

    def seek(self, offset, whence=None): # real signature unknown; restored from __doc__
        指定文件中指针位置
        """
        seek(offset[, whence]) -> None.  Move to new file position.

        Argument offset is a byte count.  Optional argument whence defaults to
(offset from start of file, offset should be >= 0); other values are 1
        (move relative to current position, positive or negative), and 2 (move
        relative to end of file, usually negative, although many platforms allow
        seeking beyond the end of a file).  If the file is opened in text mode,
        only offsets returned by tell() are legal.  Use of other offsets causes
        undefined behavior.
        Note that not all file objects are seekable.
        """
        pass

    def tell(self): # real signature unknown; restored from __doc__
        获取当前指针位置
        """ tell() -> current file position, an integer (may be a long integer). """
        pass

    def truncate(self, size=None): # real signature unknown; restored from __doc__
        截断数据，仅保留指定之前数据
        """
        truncate([size]) -> None.  Truncate the file to at most size bytes.

        Size defaults to the current file position, as returned by tell().
        """
        pass

    def write(self, p_str): # real signature unknown; restored from __doc__
        写内容
        """
        write(str) -> None.  Write string str to file.

        Note that due to buffering, flush() or close() may be needed before
        the file on disk reflects the data written.
        """
        pass

    def writelines(self, sequence_of_strings): # real signature unknown; restored from __doc__
        将一个字符串列表写入文件
        """
        writelines(sequence_of_strings) -> None.  Write the strings to the file.

        Note that newlines are not added.  The sequence can be any iterable object
        producing strings. This is equivalent to calling write() for each string.
        """
        pass

    def xreadlines(self): # real signature unknown; restored from __doc__
        可用于逐行读取文件，非全部
        """
        xreadlines() -> returns self.

        For backward compatibility. File objects now include the performance
        optimizations previously implemented in the xreadlines module.
        """
        pass

Python 2.x

python2.x

class TextIOWrapper(_TextIOBase):
    """
    Character and line based layer over a BufferedIOBase object, buffer.

    encoding gives the name of the encoding that the stream will be
    decoded or encoded with. It defaults to locale.getpreferredencoding(False).

    errors determines the strictness of encoding and decoding (see
    help(codecs.Codec) or the documentation for codecs.register) and
    defaults to "strict".

    newline controls how line endings are handled. It can be None, ‘‘,
    ‘\n‘, ‘\r‘, and ‘\r\n‘.  It works as follows:

    * On input, if newline is None, universal newlines mode is
      enabled. Lines in the input can end in ‘\n‘, ‘\r‘, or ‘\r\n‘, and
      these are translated into ‘\n‘ before being returned to the
      caller. If it is ‘‘, universal newline mode is enabled, but line
      endings are returned to the caller untranslated. If it has any of
      the other legal values, input lines are only terminated by the given
      string, and the line ending is returned to the caller untranslated.

    * On output, if newline is None, any ‘\n‘ characters written are
      translated to the system default line separator, os.linesep. If
      newline is ‘‘ or ‘\n‘, no translation takes place. If newline is any
      of the other legal values, any ‘\n‘ characters written are translated
      to the given string.

    If line_buffering is True, a call to flush is implied when a call to
    write contains a newline character.
    """
    def close(self, *args, **kwargs): # real signature unknown
        关闭文件
        pass

    def fileno(self, *args, **kwargs): # real signature unknown
        文件描述符
        pass

    def flush(self, *args, **kwargs): # real signature unknown
        刷新文件内部缓冲区
        pass

    def isatty(self, *args, **kwargs): # real signature unknown
        判断文件是否是同意tty设备
        pass

    def read(self, *args, **kwargs): # real signature unknown
        读取指定字节数据
        pass

    def readable(self, *args, **kwargs): # real signature unknown
        是否可读
        pass

    def readline(self, *args, **kwargs): # real signature unknown
        仅读取一行数据
        pass

    def seek(self, *args, **kwargs): # real signature unknown
        指定文件中指针位置
        pass

    def seekable(self, *args, **kwargs): # real signature unknown
        指针是否可操作
        pass

    def tell(self, *args, **kwargs): # real signature unknown
        获取指针位置
        pass

    def truncate(self, *args, **kwargs): # real signature unknown
        截断数据，仅保留指定之前数据
        pass

    def writable(self, *args, **kwargs): # real signature unknown
        是否可写
        pass

    def write(self, *args, **kwargs): # real signature unknown
        写内容
        pass

    def __getstate__(self, *args, **kwargs): # real signature unknown
        pass

    def __init__(self, *args, **kwargs): # real signature unknown
        pass

    @staticmethod # known case of __new__
    def __new__(*args, **kwargs): # real signature unknown
        """ Create and return a new object.  See help(type) for accurate signature. """
        pass

    def __next__(self, *args, **kwargs): # real signature unknown
        """ Implement next(self). """
        pass

    def __repr__(self, *args, **kwargs): # real signature unknown
        """ Return repr(self). """
        pass

    buffer = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default

    closed = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default

    encoding = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default

    errors = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default

    line_buffering = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default

    name = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default

    newlines = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default

    _CHUNK_SIZE = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default

    _finalizing = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default

Python 3.x

python3.x

python:open/文件操作

open/文件操作
f=open(‘/tmp/hello‘,‘w‘)
#open(路径+文件名,读写模式)
#读写模式:r只读,r+读写,w新建(会覆盖原有文件),a追加,b二进制文件.常用模式
如:‘rb‘,‘wb‘,‘r+b‘等等

读写模式的类型有：
rU 或 Ua 以读方式打开, 同时提供通用换行符支持 (PEP 278)
w 　　 以写方式打开，
a 　　 以追加模式打开 (从 EOF 开始, 必要时创建新文件)
r+ 　　以读写模式打开
w+　　以读写模式打开 (参见 w )
a+ 　   以读写模式打开 (参见 a )
rb 　    以二进制读模式打开
wb　　以二进制写模式打开 (参见 w )
ab 　   以二进制追加模式打开 (参见 a )
rb+　   以二进制读写模式打开 (参见 r+ )
wb+　  以二进制读写模式打开 (参见 w+ )
ab+ 　 以二进制读写模式打开 (参见 a+ )

========= ===============================================================Character Meaning--------- ---------------------------------------------------------------‘r‘       open for reading (default)‘w‘       open for writing, truncating the file first‘x‘       create a new file and open it for writing‘a‘       open for writing, appending to the end of the file if it exists‘b‘       binary mode‘t‘       text mode (default)‘+‘       open a disk file for updating (reading and writing)‘U‘       universal newline mode (deprecated)========= ===============================================================

注意：
1、使用‘W‘，文件若存在，首先要清空，然后（重新）创建，
2、使用‘a‘模式 ，把所有要写入文件的数据都追加到文件的末尾，即使你使用了seek（）指向文件的其他地方，如果文件不存在，将自动被创建。

f.read([size]) size未指定则返回整个文件,如果文件大小>2倍内存则有问题.f.read()读到文件尾时返回""(空字串)
file.readline() 返回一行
file.readline([size]) 返回包含size行的列表,size 未指定则返回全部行
for line in f: print line #通过迭代器访问
f.write("hello\n") #如果要写入字符串以外的数据,先将他转换为字符串.
f.tell() 返回一个整数,表示当前文件指针的位置(就是到文件头的比特数).
f.seek(偏移量,[起始位置])
用来移动文件指针
偏移量:单位:比特,可正可负
起始位置:0-文件头,默认值;1-当前位置;2-文件尾
f.close() 关闭文件

#!/usr/bin/env python
# Filename: using_file.py

poem=‘‘‘\Programming is funWhen the work is doneif you wanna make your work also fun: use Python!‘‘‘
f=file(‘poem.txt‘,‘w‘) # open for ‘w‘riting
f.write(poem) # write text to file
f.close() # close the file
f=file(‘poem.txt‘)

# if no mode is specified, ‘r‘ead mode is assumed by default
while True:
line=f.readline()
if len(line)==0: # Zero length indicates EOF
break
print line,
# Notice comma to avoid automatic newline added by Python
f.close()
# close the file

三、管理上下文

为了避免打开文件后忘记关闭，可以通过管理上下文，即：

with open(‘log‘,‘r‘) as f:

    ...

如此方式，当with代码块执行完毕时，内部会自动关闭并释放文件资源。

在Python 2.7 后，with又支持同时对多个文件的上下文进行管理，即：

with open(‘log1‘) as obj1, open(‘log2‘) as obj2:
    pass