用 kubeadm 部署生产级 k8s 集群

概述

kubeadm?已?持集群部署，且在1.13?版本中?GA，?持多?master，多?etcd?集群化部署，它也是官?最为推荐的部署?式，?来是由它的?sig?组来推进的，?来?kubeadm?在很多??确实很好的利?了?kubernetes?的许多特性，接下来?篇我们来实践并了解下它的魅?。

?标

1. 通过 kubeadm 搭建?可? kubernetes 集群，并新建管理?户

2. 为后续做版本升级演示，此处使?1.13.1版本，到下?篇再升级到 v1.14

3. kubeadm 的原理解读

本?主要介绍 kubeadm 对?可?集群的部署

kubeadm 部署 k8s v1.13 ?可?集群

?式有两种

  • Stacked etcd topology

  • 即每台 etcd 各?独?，分别部署在 3 台 master 上，互不通信，优点是简单，缺点是缺乏 etcd ?可?性
  • 需要?少 4 台机器（3master 和 etcd,1node)
  • External etcd topology

  • 即采?集群外 etcd 拓扑结构，这样的冗余性更好，但需要?少7台机器（3master,3etcd,1node)
  • ?产环境建议采?该?案
  • 本?也采?这个拓扑

步骤

  • 环境准备
  • 安装组件：docker,kubelet,kubeadm（所有节点）
  • 使?上述组件部署 etcd ?可?集群
  • 部署 master
  • 加?node
  • ?络安装
  • 验证
  • 总结

机环境准备

  • 系统环境
#操作系统版本（?必须，仅为此处案例）
$cat /etc/redhat-release
CentOS Linux release 7.2.1511 (Core)
#内核版本（?必须，仅为此处案例）
$uname -r
4.17.8-1.el7.elrepo.x86_64

#数据盘开启ftype（在每台节点上执?）
umount /data
mkfs.xfs -n ftype=1 -f /dev/vdb
#禁?swap
swapoff -a
sed -i "s#^/swapfile#\#/swapfile#g" /etc/fstab
mount -a

docker,kubelet,kubeadm 的安装（所有节点）

  • 安装运?时（docker）

    • k8s1.13 版本根据官?建议，暂不采?最新的 18.09，这?我们采?18.06，安装时需指定版本
    • 来源：kubeadm?now?properly?recognizes?Docker?18.09.0?and?newer,?but?still?treats?18.06?as?the?default?supported version.
    • 安装脚本如下（在每台节点上执?）：
yum install -y yum-utils device-mapper-persistent-data lvm2
yum-config-manager         --add-repo         https://download.docker.com/linux/centos/docker-ce.repo

yum makecache fast

yum install -y --setopt=obsoletes=0       docker-ce-18.06.1.ce-3.el7

systemctl start docker
systemctl enable docker
  • 安装 kubeadm,kubelet,kubectl

    • 官?的 Google yum 源?法从国内服务器上直接下载，所以可先在其他渠道下载好，在上传到服务器上
cat <<EOF > /etc/yum.repos.d/kubernetes.repo
    • 本地安装
# 禁?selinux
  • ?络修复，已知 centos7 会因 iptables 被绕过?将流量错误路由，因此需确保sysctl 配置中的 net.bridge.bridgenf-call-iptables 被设置为 1
cat <<EOF > /etc/sysctl.d/k8s.conf

使?上述组件部署 etcd ?可?集群

1. 在 etcd 节点上，将 etcd 服务设置为由 kubelet 启动管理

cat << EOF > /etc/systemd/system/kubelet.service.d/20-etcd-service-manager.conf

2.?给每台?etcd?主机?成?kubeadm?配置?件，确保每台主机运??个?etcd?实例:在?etcd1（即上述的?hosts0）上执?上述

命令，可以在 /tmp ?录下看到?个主机名的?录

# Update HOST0, HOST1, and HOST2 with the IPs or resolvable names of your hosts
export HOST0=10.10.184.226
export HOST1=10.10.213.222
export HOST2=10.10.239.108

# Create temp directories to store files that will end up on other hosts.
mkdir -p /tmp/${HOST0}/ /tmp/${HOST1}/ /tmp/${HOST2}/

ETCDHOSTS=(${HOST0} ${HOST1} ${HOST2})
NAMES=("infra0" "infra1" "infra2")

for i in "${!ETCDHOSTS[@]}"; do
HOST=${ETCDHOSTS[$i]}
NAME=${NAMES[$i]}
cat << EOF > /tmp/${HOST}/kubeadmcfg.yaml
apiVersion: "kubeadm.k8s.io/v1beta1"
kind: ClusterConfiguration
etcd:
      local:
            serverCertSANs:
            - "${HOST}"
            peerCertSANs:
            - "${HOST}"
            extraArgs:
                  initial-cluster:
${NAMES[0]}=https://${ETCDHOSTS[0]}:2380,${NAMES[1]}=https://${ETCDHOSTS[1]}:2380,${N
AMES[2]}=https://${ETCDHOSTS[2]}:2380
                  initial-cluster-state: new
                  name: ${NAME}
                  listen-peer-urls: https://${HOST}:2380
                  listen-client-urls: https://${HOST}:2379
                  advertise-client-urls: https://${HOST}:2379
                  initial-advertise-peer-urls: https://${HOST}:2380
EOF
done

3.?制作CA：在host0上执?命令?成证书，它将创建两个?件：/etc/kubernetes/pki/etcd/ca.crt/etc/kubernetes/pki/etcd/ca.key?(这?步需要×××)

[[email protected] ~]# kubeadm init phase certs etcd-ca
[certs] Generating "etcd/ca" certificate and key

4.?在?host0?上给每个?etcd?节点?成证书：

export HOST0=10.10.184.226
export HOST1=10.10.213.222
export HOST2=10.10.239.108
kubeadm init phase certs etcd-server --config=/tmp/${HOST2}/kubeadmcfg.yaml
kubeadm init phase certs etcd-peer --config=/tmp/${HOST2}/kubeadmcfg.yaml
kubeadm init phase certs etcd-healthcheck-client --
config=/tmp/${HOST2}/kubeadmcfg.yaml
kubeadm init phase certs apiserver-etcd-client --config=/tmp/${HOST2}/kubeadmcfg.yaml
cp -R /etc/kubernetes/pki /tmp/${HOST2}/
# cleanup non-reusable certificates
find /etc/kubernetes/pki -not -name ca.crt -not -name ca.key -type f -delete

kubeadm init phase certs etcd-server --config=/tmp/${HOST1}/kubeadmcfg.yaml
kubeadm init phase certs etcd-peer --config=/tmp/${HOST1}/kubeadmcfg.yaml
kubeadm init phase certs etcd-healthcheck-client --
config=/tmp/${HOST1}/kubeadmcfg.yaml
kubeadm init phase certs apiserver-etcd-client --config=/tmp/${HOST1}/kubeadmcfg.yaml
cp -R /etc/kubernetes/pki /tmp/${HOST1}/
find /etc/kubernetes/pki -not -name ca.crt -not -name ca.key -type f -delete

kubeadm init phase certs etcd-server --config=/tmp/${HOST0}/kubeadmcfg.yaml
kubeadm init phase certs etcd-peer --config=/tmp/${HOST0}/kubeadmcfg.yaml
kubeadm init phase certs etcd-healthcheck-client --
config=/tmp/${HOST0}/kubeadmcfg.yaml
kubeadm init phase certs apiserver-etcd-client --config=/tmp/${HOST0}/kubeadmcfg.yaml
# No need to move the certs because they are for HOST0

# clean up certs that should not be copied off this host
find /tmp/${HOST2} -name ca.key -type f -delete
find /tmp/${HOST1} -name ca.key -type f -delete
  • 将证书和 kubeadmcfg.yaml 下发到各个 etcd 节点上效果为
/root/
└── kubeadmcfg.yaml
---
/etc/kubernetes/pki
├── apiserver-etcd-client.crt
├── apiserver-etcd-client.key
└── etcd
        ├── ca.crt
        ├── ca.key
        ├── healthcheck-client.crt
        ├── healthcheck-client.key
        ├── peer.crt
        ├── peer.key
        ├── server.crt
        └── server.key

5.??成静态?pod?manifest?,在?3?台?etcd?节点上分别执?：（需×××）

$ kubeadm init phase etcd local --config=/root/kubeadmcfg.yaml
[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"

6. 检查 etcd 集群状态，?此 etcd 集群搭建完成

docker run --rm -it --net host -v /etc/kubernetes:/etc/kubernetes
k8s.gcr.io/etcd:3.2.24 etcdctl --cert-file /etc/kubernetes/pki/etcd/peer.crt --keyfile /etc/kubernetes/pki/etcd/peer.key --ca-file /etc/kubernetes/pki/etcd/ca.crt --
endpoints https://${HOST0}:2379 cluster-health
member 9969ee7ea515cbd2 is healthy: got healthy result from
https://10.10.213.222:2379
member cad4b939d8dfb250 is healthy: got healthy result from
https://10.10.239.108:2379
member e6e86b3b5b495dfb is healthy: got healthy result from
https://10.10.184.226:2379
cluster is healthy

使? kubeadm 部署 master

  • 将任意?台 etcd 上的证书拷?到 master1 节点
export CONTROL_PLANE="[email protected]"
+scp /etc/kubernetes/pki/etcd/ca.crt "${CONTROL_PLANE}":
+scp /etc/kubernetes/pki/apiserver-etcd-client.crt "${CONTROL_PLANE}":
+scp /etc/kubernetes/pki/apiserver-etcd-client.key "${CONTROL_PLANE}":
  • 在第?台 master 上编写配置?件 kubeadm-config.yaml 并初始化
apiVersion: kubeadm.k8s.io/v1beta1
kind: ClusterConfiguration
kubernetesVersion: stable
#kubernetesVersion: 1.13.1
#注意这?我们想先安装1.13.1再后续升级1.13.4所以直接声明版本号
apiServer:
   certSANs:
   - "k8s.paas.test"
controlPlaneEndpoint: "k8s.paas.test:6443"
etcd:
       external:
              endpoints:
              - https://10.10.184.226:2379
              - https://10.10.213.222:2379
              - https://10.10.239.108:2379
              caFile: /etc/kubernetes/pki/etcd/ca.crt
              certFile: /etc/kubernetes/pki/apiserver-etcd-client.crt
              keyFile: /etc/kubernetes/pki/apiserver-etcd-client.key
networking:
    podSubnet: "10.244.0.0/16"

注意：这?的?k8s.paas.test:6443?是?个?LB，如果没有可?虚拟?IP?来做

  • 使?私有仓库（?定义镜像功能） kubeadm ?持通过修改配置?件中的参数来灵活定制集群初始化?作，如?imageRepository 可以设置镜像前缀，我们可以在将镜像传到??内部私服上之后，编辑 kubeadm-config.yaml 中的该参数之后再执? init
  • 在?master1?上执?：kubeadm?init?--config?kubeadm-config.yaml
Your Kubernetes master has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

    mkdir -p $HOME/.kube
    sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
    sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
    https://kubernetes.io/docs/concepts/cluster-administration/addons/

You can now join any number of machines by running the following on each node
as root:

  kubeadm join k8s.paas.test:6443 --token f1oygc.3zlc31yjcut46prf --discoverytoken-ca-cert-hash xx

  [[email protected] ~]
  $kubectl get node
  NAME STATUS ROLES AGE VERSION
  k8s-m1 NotReady master 4m54s v1.13.1

安装另外2台 master

  • master1?上的?admin.conf?配置?件和?pki?相关证书拷?到另外?2?台?master?同样?录下如：
/etc/kubernetes/pki/ca.crt
/etc/kubernetes/pki/ca.key
/etc/kubernetes/pki/sa.key
/etc/kubernetes/pki/sa.pub
/etc/kubernetes/pki/front-proxy-ca.crt
/etc/kubernetes/pki/front-proxy-ca.key
/etc/kubernetes/pki/etcd/ca.crt
/etc/kubernetes/pki/etcd/ca.key (官??档中此处需要拷?，但实际不需要)
/etc/kubernetes/admin.conf

注：官??档少了两个?件/etc/kubernetes/pki/apiserver-etcd-client.crt/etc/kubernetes/pki/apiserver-etcdclient.key，不加?apiserver?会启动失败并报错：

Unable to create storage backend: config (&{ /registry []
/etc/kubernetes/pki/apiserver-etcd-client.key /etc/kubernetes/pki/apiserver-etcdclient.crt /etc/kubernetes/pki/etcd/ca.crt true 0xc000133c20 <nil> 5m0s 1m0s}),
err (open /etc/kubernetes/pki/apiserver-etcd-client.crt: no such file or
directory)
  • 在?2?和?3?master?中执?加?：
  kubeadm join k8s.paas.test:6443 --token f1oygc.3zlc31yjcut46prf --discovery-tokenca-cert-hash sha256:078b63e29378fb6dcbedd80dd830b83e37521f294b4e3416cd77e854041d912f
--experimental-control-plane

加? node 节点

[[email protected] ~]
$ kubeadm join k8s.paas.test:6443 --token f1oygc.3zlc31yjcut46prf --discovery-tokenca-cert-hash sha256:078b63e29378fb6dcbedd80dd830b83e37521f294b4e3416cd77e854041d912f
[preflight] Running pre-flight checks
[discovery] Trying to connect to API Server "k8s.paas.test:6443"
[discovery] Created cluster-info discovery client, requesting info from
"https://k8s.paas.test:6443"
[discovery] Requesting info from "https://k8s.paas.test:6443" again to validate TLS
against the pinned public key
[discovery] Cluster info signature and contents are valid and TLS certificate
validates against pinned roots, will use API Server "k8s.paas.test:6443"
[discovery] Successfully established connection with API Server "k8s.paas.test:6443"
[join] Reading configuration from the cluster...
[join] FYI: You can look at this config file with ‘kubectl -n kube-system get cm
kubeadm-config -oyaml‘
[kubelet] Downloading configuration for the kubelet from the "kubelet-config-1.13"
ConfigMap in the kube-system namespace
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Writing kubelet environment file with flags to file
"/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Activating the kubelet service
[tlsbootstrap] Waiting for the kubelet to perform the TLS Bootstrap...
[patchnode] Uploading the CRI Socket information "/var/run/dockershim.sock" to the
Node API object "k8s-n1" as an annotation

This node has joined the cluster:
* Certificate signing request was sent to apiserver and a response was received.
* The Kubelet was informed of the new secure connection details.

Run ‘kubectl get nodes‘ on the master to see this node join the cluster.

网络安装

kubectl apply -f
https://raw.githubusercontent.com/coreos/flannel/a70459be0084506e4ec919aa1c114638878d
b11b/Documentation/kube-flannel.yml
kubectl get pod --all-namespaces -o wide
NAMESPACE NAME READY STATUS RESTARTS AGE
IP NODE NOMINATED NODE READINESS GATES
kube-system coredns-86c58d9df4-dc4t2 1/1 Running 0 14m
172.17.0.3 k8s-m1 <none> <none>
kube-system coredns-86c58d9df4-jxv6v 1/1 Running 0 14m
172.17.0.2 k8s-m1 <none> <none>
kube-system kube-apiserver-k8s-m1 1/1 Running 0 13m
10.10.119.128 k8s-m1 <none> <none>
kube-system kube-apiserver-k8s-m2 1/1 Running 0 5m
10.10.76.80 k8s-m2 <none> <none>
kube-system kube-apiserver-k8s-m3 1/1 Running 0 4m58s
10.10.56.27 k8s-m3 <none> <none>
kube-system kube-controller-manager-k8s-m1 1/1 Running 0 13m
10.10.119.128 k8s-m1 <none> <none>
kube-system kube-controller-manager-k8s-m2 1/1 Running 0 5m
10.10.76.80 k8s-m2 <none> <none>
kube-system kube-controller-manager-k8s-m3 1/1 Running 0 4m58s
10.10.56.27 k8s-m3 <none> <none>
kube-system kube-flannel-ds-amd64-nvmtk 1/1 Running 0 44s
10.10.56.27 k8s-m3 <none> <none>
kube-system kube-flannel-ds-amd64-pct2g 1/1 Running 0 44s
10.10.76.80 k8s-m2 <none> <none>
kube-system kube-flannel-ds-amd64-ptv9z 1/1 Running 0 44s
10.10.119.128 k8s-m1 <none> <none>
kube-system kube-flannel-ds-amd64-zcv49 1/1 Running 0 44s
10.10.175.146 k8s-n1 <none> <none>
kube-system kube-proxy-9cmg2 1/1 Running 0 2m34s
10.10.175.146 k8s-n1 <none> <none>
kube-system kube-proxy-krlkf 1/1 Running 0 4m58s
10.10.56.27 k8s-m3 <none> <none>
kube-system kube-proxy-p9v66 1/1 Running 0 14m
10.10.119.128 k8s-m1 <none> <none>
kube-system kube-proxy-wcgg6 1/1 Running 0 5m
10.10.76.80 k8s-m2 <none> <none>
kube-system kube-scheduler-k8s-m1 1/1 Running 0 13m
10.10.119.128 k8s-m1 <none> <none>
kube-system kube-scheduler-k8s-m2 1/1 Running 0 5m
10.10.76.80 k8s-m2 <none> <none>
kube-system kube-scheduler-k8s-m3 1/1 Running 0 4m58s
10.10.56.27 k8s-m3 <none> <none>

安装完成

验证

  • ?先验证kube-apiserver,?kube-controller-manager,?kube-scheduler,?pod?network?是否正常：
$kubectl create deployment nginx --image=nginx:alpine
$kubectl get pods -l app=nginx -o wide
NAME READY STATUS RESTARTS AGE IP NODE
NOMINATED NODE READINESS GATES
nginx-54458cd494-r6hqm 1/1 Running 0 5m24s 10.244.4.2 k8s-n1
<none> <none>
  • kube-proxy 验证
$kubectl expose deployment nginx --port=80 --type=NodePort
service/nginx exposed

[[email protected] ~]
$kubectl get svc
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
kubernetes ClusterIP 10.96.0.1 <none> 443/TCP 122m
nginx NodePort 10.108.192.221 <none> 80:30992/TCP 4s
[[email protected] ~]
$kubectl get pods -l app=nginx -o wide
NAME READY STATUS RESTARTS AGE IP NODE
NOMINATED NODE READINESS GATES
nginx-54458cd494-r6hqm 1/1 Running 0 6m53s 10.244.4.2 k8s-n1
<none> <none>

$curl -I k8s-n1:30992
HTTP/1.1 200 OK
  • 验证 dns,pod ?络状态
kubectl run --generator=run-pod/v1 -it curl --image=radial/busyboxplus:curl
If you don‘t see a command prompt, try pressing enter.
[ [email protected]:/ ]$ nslookup nginx
Server: 10.96.0.10
Address 1: 10.96.0.10 kube-dns.kube-system.svc.cluster.local

Name: nginx
Address 1: 10.108.192.221 nginx.default.svc.cluster.local
  • ?可?

关机 master1，在?个随机 pod 中访问 Nginx 关机 master1，在?个随机 pod 中访问 Nginx

while true;do curl -I nginx && sleep 1 ;done

总结

  • 关于版本

    • 内核版本 4.19 更加稳定此处不建议4.17（再新就是5了）
    • docker 最新稳定版是 1.17.12，此处是 1.18.06，虽 k8s 官?也确认兼容1.18.09 了但?产上还是建议 1.17.12
  • 关于?络，各家选择不同，flannel在中?公司较为普遍，但部署前要选好?络插件，在配置?件中提前设置好（官?博客?开始的kubeadm配置中没写，后?在?络设置中?要求必须加）
  • 出错处理
    • 想重置环境的话，kubeadm reset 是个很好的?具，但它并不会完全重置，在etcd 中的的部分数据（如?configmap?secure?等)是没有被清空的，所以如果有必要重置真个环境，记得在?reset?后将?etcd?也重置。
    • 重置 etcd 办法为清空 etcd 节点 /var/lib/etcd，重启 docker 服务）
  • ×××
    • 镜像：kubeadm 已?持?定义镜像前缀,kubeadm-config.yaml 中设置 imageRepository 即可
    • yum，可提前下载导?，也可以设置 http_proxy 来访问
    • init，签发证书和?init?时需要连接?google，也可以设置?http_proxy来访问。
  • 更多
    • 证书、升级问题将在下?篇继续介绍。

参考：

51Reboot Python 运维开发18天训练营1999特价倒计时4天

网络班|面授班同步，有想要咨询的WeChat：17812796384

原文地址：https://blog.51cto.com/51reboot/2379722

时间： 2024-10-04 02:27:46

用 kubeadm 部署生产级 k8s 集群的相关文章

kubeadm部署高可用K8S集群（v1.14.0）

一. 集群规划 主机名 IP 角色 主要插件 VIP 172.16.1.10 实现master高可用和负载均衡 k8s-master01 172.16.1.11 master kube-apiserver.kube-controller.kube-scheduler.kubelet.kube-proxy.kube-flannel.etcd k8s-master02 172.16.1.12 master kube-apiserver.kube-controller.kube-scheduler.k

kubeadm部署kubernetes 1.12集群

kubeadm是Kubernetes官方提供的用于快速安装Kubernetes集群的工具,伴随Kubernetes每个版本的发布都会同步更新,kubeadm会对集群配置方面的一些实践做调整,通过实验kubeadm可以学习到Kubernetes官方在集群配置上一些新的最佳实践. 在Kubernetes的文档Creating a single master cluster with kubeadm中已经给出了目前kubeadm的主要特性已经处于beta状态了,在2018年将进入GA状态,说明kube

Kubernetes系列之kubeadm部署多节点master集群

版本信息 linux Centos7 kubernetes v1.14.5 docker v18.06.1-ce 节点信息 VIP:47.110.19.11 阿里云负载均衡 安装前准备 开始部署前确保所有节点网络正常,能访问公网.主要操作都在VPC-OPEN-MASTER001节点进行,设置VPC-OPEN-MASTER001可以免密码登陆其他节点.所有操作都使用root用户身份进行. 服务器说明 我们这里使用的是五台centos-7.6的虚拟机,具体信息如下表: 系统类型 IP地址 节点角色

kubeadm部署k8s-v1.11.1集群

一.环境准备 master:192.168.0.8,kubelet,kubeadm,kubectl:apiserver,manager,scheduler,proxy,pause,etcd,coredns node01:192.168.0.9,kubeadm,kubelet node02:192.168.0.10,kubeadm,kubelet 节点网络:192.168.0.0/24 Service网络:10.96.0.0/12 Pod网络:10.244.0.0/16(flannel默认) 1.

kubeadm部署单master Kuberntes集群

本文参考kubernetes docs 使用kubeadm创建single master的Kuberntes集群 虚机两台Centos75 Kubernetes Yum Repo采用国内阿里源 版本 v1.14.1 (该版本发布时间2019-04-09) Pod网络采用Calico 1 配置镜像源 以yum为例,Ubuntu可以采用中科大ustc的源 官方Google源 cat <<EOF > /etc/yum.repos.d/kubernetes.repo [kubernetes] n

Kubeadm部署Kubernetes1.14.3集群

一.环境说明 主机名 IP地址 角色 系统 node11 192.168.11.11 k8s-master Centos7.6node12 192.168.11.12 k8s-node Centos7.6node13 192.168.11.13 k8s-node Centos7.6 注意:官方建议每台机器至少双核2G内存,同时需确保MAC和product_uuid唯一(参考下面的命令查看) 二.环境配置 以下命令在三台主机上均需运行 1.设置阿里云yum源(可选) curl -o /etc/yu

centos7 部署rancher管理k8s集群

#yum install docker-io #systemctl start docker 序号 ip 用途 备注1 192.168.1.237 rancher主 2 192.168.1.236 rancher从 3 192.168.1.238 rancher从 #docker run -d --restart=unless-stopped -p 8080:8080 rancher/server http://192.168.1.237:8080/admin/access/local 访问控制

kubespray -- 快速部署高可用k8s集群

主机 系统版本      配置       ip Mater.Node,ansible CentOS 7.2                                             4核8G   172.16.6.44      master,Node         CentOS 7.2                                             4核8G   172.16.6.45   Mater.Node            CentOS 7.

Just 5分钟！使用k3s部署轻量Kubernetes集群快速教程

大小仅有40MB的k3s为想要节省开销进行开发和测试的企业提供了一个很好的选择.本文将用一种极为简洁的方式,教你在5分钟之内使用k3s部署轻量Kubernetes集群. 本文来自:Rancher Labs Kubernetes已经改变了如何大规模部署和管理容器化工作负载.现在开发人员面临的挑战主要在于设置过程的复杂性和资源需求量巨大.如果你深受内存不足的困扰,想要部署轻量级Kubernetes集群来减少内存占用,那么你一定要考虑由Rancher Labs发布的轻量级Kubernetes发行版--