CentOS7 关闭防火墙[转]

CentOS6关闭防火墙使用以下命令，

/临时关闭
service iptables stop
//禁止开机启动
chkconfig iptables off

CentOS7中若使用同样的命令会报错，

stop  iptables.service
Failed to stop iptables.service: Unit iptables.service not loaded.

这是因为CentOS7版本后防火墙默认使用firewalld，因此在CentOS7中关闭防火墙使用以下命令，

//临时关闭
systemctl stop firewalld
//禁止开机启动
systemctl disable firewalld
Removed symlink /etc/systemd/system/multi-user.target.wants/firewalld.service.
Removed symlink /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.

当然，如果安装了iptables-service，也可以使用下面的命令，

yum install -y iptables-services
//关闭防火墙
service iptables stop
Redirecting to /bin/systemctl stop  iptables.service
//检查防火墙状态
service iptables status
Redirecting to /bin/systemctl status  iptables.service
鈼iptables.service - IPv4 firewall with iptables
   Loaded: loaded (/usr/lib/systemd/system/iptables.service; disabled; vendor preset: disabled)
   Active: inactive (dead)

原文地址：https://www.cnblogs.com/deepminer/p/9182136.html

时间： 2024-10-10 18:25:50

CentOS7 关闭防火墙[转]的相关文章

CentOS7关闭防火墙方法

在之前的版本中关闭防火墙等服务的命令是 service iptables stop /etc/init.d/iptables stop 在RHEL7中,其实没有这个服务 [[email protected] ~]# cat /etc/redhat-release Red Hat Enterprise Linux Server release 7.0 (Maipo)[[email protected] ~]# service iptables stopRedirecting to /bin/sys

Centos7 关闭防火墙（Firewalld ），使用防火墙（iptables）

1.直接关闭防火墙 systemctl stop firewalld.service: #停止firewall systemctl disable firewalld.service: #禁止firewall开机启动 2.安装并启动 iptables service,以及设置开机自启 yum -y install iptables-services:#安装iptables systemctl start iptables:#启动iptables systemctl enable iptables

iptables详解与Centos7 关闭防火墙

http://www.cnblogs.com/metoy/p/4320813.html CentOS 7.0默认使用的是firewall作为防火墙,使用iptables必须重新设置一下 1.直接关闭防火墙 systemctl stop firewalld.service #停止firewall systemctl disable firewalld.service #禁止firewall开机启动 2.设置 iptables service yum -y install iptables-serv

centos7——关闭防火墙和SElinux

防火墙的开启和关闭: 查看防火墙状态 systemctl status firewalld #Active: inactive (dead) --表示防火墙已经关闭临时关闭防火墙 systemctl stop firewalld 临时打开防火墙 systemctl start firewalld 永久防火墙关闭 systemctl disable firewalld 防火墙开机启动 systemctl enable firewalld SELinux的开启和关闭查看SELinux状态 get

centos7 关闭防火墙

firewall-cmd --state #查看默认防火墙状态(关闭后显示notrunning,开启后显示running) systemctl stop firewalld.service #停止firewall systemctl disable firewalld.service #禁止firewall开机启动 init 6 #重启虚拟机,然后再输入第一条命令查看防火墙状态原文地址:https://www.cnblogs.com/nyfz/p/8686717.html

Linux——Centos7关闭防火墙命令

systemctl stop firewalld.service #停止firewallsystemctl disable firewalld.service #禁止firewall开机启动 systemctl start firewalld.service firewall-cmd --state #查看默认防火墙状态关闭后显示notrunning,开启后显示running 原文地址:https://www.cnblogs.com/wuhl-89/p/9054681.html

centos7 关闭防火墙

CentOS 7 默认使用的是firewall作为防火墙关闭firewall: systemctl stop firewalld.service #停止firewall systemctl disable firewalld.service #禁止firewall开机启动 systemctl restart iptables.service #最后重启防火墙使配置生效 systemctl enable iptables.service #设置防火墙开机启动 firewall-cmd --s

centos7关闭防火墙

CentOS 7.0默认使用的是firewall作为防火墙,这里改为iptables防火墙.firewall:systemctl start firewalld.service#启动firewallsystemctl stop firewalld.service#停止firewallsystemctl disable firewalld.service#禁止firewall开机启动

centos7关闭防火墙(转)

直接命令:service firewalld stop 1. Disable Firewalld Service. [[email protected] ~]# systemctl mask firewalld 2. Stop Firewalld Service. [[email protected] ~]# systemctl stop firewalld 3. Install iptables service related packages. Linux学习,http:// linux.i