centos7虚拟机 网卡启动失败报错 failed to start LSB Bring up/down

亲自尝试:

  解决办法: 禁用NetworkManager

1、禁用NetworkManager服务systemctl stop NetworkManager
2、永久关闭NetworkManager服务
systemctl disable NetworkManager

  最后重启网卡,会发现可以正常启动并且可以ping通。

systemctl restart network

  

尝试查询状态并ping 百度

systemctl status network
[[email protected]] ping 114.114.114.114
PING 114.114.114.114 (114.114.114.114) 56(84) bytes of data.
64 bytes from 114.114.114.114: icmp_seq=1 ttl=128 time=73.8 ms
64 bytes from 114.114.114.114: icmp_seq=2 ttl=128 time=73.4 ms
64 bytes from 114.114.114.114: icmp_seq=3 ttl=128 time=80.5 ms
64 bytes from 114.114.114.114: icmp_seq=4 ttl=128 time=57.3 ms
64 bytes from 114.114.114.114: icmp_seq=5 ttl=128 time=68.6 ms
64 bytes from 114.114.114.114: icmp_seq=6 ttl=128 time=67.9 ms

 

原文地址:https://www.cnblogs.com/pythonx/p/12090320.html

时间: 2024-10-12 13:31:29

centos7虚拟机 网卡启动失败报错 failed to start LSB Bring up/down的相关文章

启动网卡报错Failed to start LSB: Bring up/down network

启动网卡报错(Failed to start LSB: Bring up/down networking )解决办法总结 centos7.5 操作系统安装到vmware后,修改网卡配置启动报错.具体的报错提示如下:[root@centos7 ~]# systemctl restart networkJob for network.service failed because the control process exited with error code. See "systemctl st

linux报错“Failed to start LSB: Bring up/down networking.”

一.报错:         linux启动后没有IP地址     二.报错原因: 由于centos7中没有70-persistent-net.rules这个文件,复制出来的虚拟机需要修改mac地址. 三.解决办法: 1.可以vim /etc/sysconfig/network-scripts/ifcfg-eno16777736修改其中的mac地址. 2.也可以systemctl stop NetworkManager; systemctl disable NetworkManager; syst

linux下启动tomcat报错 Failed to get local InetAddress for VMID. This is unlikely to matter. At all. We'll add some extra randomness

INFO [localhost-startStop-1] com.mchange.v2.log.slf4j.Slf4jMLog$Slf4jMLogger$InfoLogger.log(206) | Failed to get local InetAddress for VMID. This is unlikely to matter. At all. We'll add some extra randomnessjava.net.UnknownHostException: Oracle.Linu

启动Myeclipse报错“Failed to create the Java Virtual Machine”的解决办法

我安装的是Myeclipse 10.7.1.装上好久没用,今天启动突然报错:Failed to create the Java Virtual Machine. 检查Myeclipse安装好使用时好的啊,近期也没用,可能是近期升级了本地单独安装的jre版本导致的吧(Myeclipse使用自己的jre的). 整理了如下2个解决办法,可以选择一个使用,我选择的是第2个.经测试都ok. 方法一: 找到Myeclpise路径下的myeclipse.ini文件: 编辑将Xmx(JVM Heap最大允许的尺

Docker中启动mysql报错: Failed to get D-Bus connection

docker版本: [[email protected] ~]# docker versionClient: Version:         1.10.3 API version:     1.22 Package version: docker-common-1.10.3-46.el7.centos.10.x86_64 Go version:      go1.6.3 Git commit:      d381c64-unsupported Built:           Thu Aug

vmware克隆虚拟机网卡启动失败

1.更改mac,与虚拟机网卡相同 如:00:50:56:b4:20:dc 2.删除 net.rules rm -rf /etc/udev/rules.d/70-persistent-net.rules 3.重启 reboot 原文地址:https://www.cnblogs.com/dpwindy/p/9104522.html

Vmware复制移动虚拟机网卡启动失败

虚拟机克隆 Error:No suitable device found: no device found for connection System eth0 Error:No suitable device found: no device found for connection  'System eth0' 主要是 MAC地址变了,需要重新生成MAC地址 Network Adapter Remove删除网卡 后添加一个新的网卡,就是点击add,这时跟前面一台的MAC Address 就不

linux里的vmware的虚拟机无法启动,报错"Internal error"

今天遇到一个很奇怪的问题,linux服务器上,安装的vmware虚拟机,打开vmware,查看虚拟机是没有启动的.但是访问这个虚拟机地址没有问题,于是,就启动一下,结果提示"Unable to change virtual machine power state: Internal error". 网上搜一下,解决问题了,和大家分享一下: 1.每个虚拟机启动,linux都会启动一个进程vmware-vmx. 2.通过ps aux|grep vmware-vmx 找到无法启动虚拟机对应的

Failed to start LSB: Bring up/down networking 另外一个偏方

之前网卡启动不了,会是配置不对,或者是移动了虚拟机导致hwaddr发生了变化. 但是今天没改动什么,突然用不了,一直报错Failed to start LSB: Bring up/down .... 通过journalctl -xe  查看一直报错: Error: Connection activation f.... 后来我用了命令: service NetworkManager stop 关闭这个服务后,然后service network restart 启动成功 原文地址:https://