kubernetes v1.15.4 部署手册

配置要求

推荐在阿里云采购如下配置：（也可以使用自己的虚拟机、私有云等）

• 3台 2核4G 的ECS（突发性能实例 t5 ecs.t5-c1m2.large或同等配置，单台约 0.4元/小时，停机时不收费）
• Cent OS 7.6

安装后的软件版本为

• Kubernetes v1.15.4
  • calico 3.8.2
  • nginx-ingress 1.5.3
• Docker 18.09.7

检查 centos / hostname

修改 hostname

安装docker / kubelet

使用 root 身份在所有节点执行如下代码，以安装软件：

• docker
• nfs-utils
• kubectl / kubeadm / kubelet

#!/bin/bash

# 在 master 节点和 worker 节点都要执行

# 安装 docker
# 参考文档如下
# https://docs.docker.com/install/linux/docker-ce/centos/
# https://docs.docker.com/install/linux/linux-postinstall/

# 卸载旧版本
yum remove -y docker docker-client docker-client-latest docker-common docker-latest docker-latest-logrotate docker-logrotate docker-selinux docker-engine-selinux docker-engine

# 设置 yum repository
yum install -y yum-utils device-mapper-persistent-data lvm2
yum-config-manager --add-repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo

# 安装并启动 docker
yum install -y docker-ce-18.09.7 docker-ce-cli-18.09.7 containerd.io
systemctl enable docker
systemctl start docker

# 安装 nfs-utils
# 必须先安装 nfs-utils 才能挂载 nfs 网络存储
yum install -y nfs-utils

# 关闭 防火墙
systemctl stop firewalld
systemctl disable firewalld

# 关闭 SeLinux
setenforce 0
sed -i "s/SELINUX=enforcing/SELINUX=disabled/g" /etc/selinux/config

# 关闭 swap
swapoff -a
yes | cp /etc/fstab /etc/fstab_bak
cat /etc/fstab_bak |grep -v swap > /etc/fstab

# 修改 /etc/sysctl.conf
# 如果有配置，则修改
sed -i "s#^net.ipv4.ip_forward.*#net.ipv4.ip_forward=1#g"  /etc/sysctl.conf
sed -i "s#^net.bridge.bridge-nf-call-ip6tables.*#net.bridge.bridge-nf-call-ip6tables=1#g"  /etc/sysctl.conf
sed -i "s#^net.bridge.bridge-nf-call-iptables.*#net.bridge.bridge-nf-call-iptables=1#g"  /etc/sysctl.conf
# 可能没有，追加
echo "net.ipv4.ip_forward = 1" >> /etc/sysctl.conf
echo "net.bridge.bridge-nf-call-ip6tables = 1" >> /etc/sysctl.conf
echo "net.bridge.bridge-nf-call-iptables = 1" >> /etc/sysctl.conf
# 执行命令以应用
sysctl -p

# 配置K8S的yum源
cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=http://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=http://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg
       http://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF

# 卸载旧版本
yum remove -y kubelet kubeadm kubectl

# 安装kubelet、kubeadm、kubectl
yum install -y kubelet-1.15.4 kubeadm-1.15.4 kubectl-1.15.4

# 修改docker Cgroup Driver为systemd
# # 将/usr/lib/systemd/system/docker.service文件中的这一行 ExecStart=/usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock
# # 修改为 ExecStart=/usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock --exec-opt native.cgroupdriver=systemd
# 如果不修改，在添加 worker 节点时可能会碰到如下错误
# [WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd".
# Please follow the guide at https://kubernetes.io/docs/setup/cri/
sed -i "s#^ExecStart=/usr/bin/dockerd.*#ExecStart=/usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock --exec-opt native.cgroupdriver=systemd#g" /usr/lib/systemd/system/docker.service

# 设置 docker 镜像，提高 docker 镜像下载速度和稳定性
# 如果您访问 https://hub.docker.io 速度非常稳定，亦可以跳过这个步骤
curl -sSL https://get.daocloud.io/daotools/set_mirror.sh | sh -s http://f1361db2.m.daocloud.io

# 重启 docker，并启动 kubelet
systemctl daemon-reload
systemctl restart docker
systemctl enable kubelet && systemctl start kubelet

docker version

初始化 master 节点

#!/bin/bash

# 只在 master 节点执行

# 查看完整配置选项 https://godoc.org/k8s.io/kubernetes/cmd/kubeadm/app/apis/kubeadm/v1beta2
rm -f ./kubeadm-config.yaml
cat <<EOF > ./kubeadm-config.yaml
apiVersion: kubeadm.k8s.io/v1beta2
kind: ClusterConfiguration
kubernetesVersion: v1.15.4
imageRepository: registry.cn-hangzhou.aliyuncs.com/google_containers
controlPlaneEndpoint: "${APISERVER_NAME}:6443"
networking:
  serviceSubnet: "10.96.0.0/16"
  podSubnet: "${POD_SUBNET}"
  dnsDomain: "cluster.local"
EOF

# kubeadm init
# 根据您服务器网速的情况，您需要等候 3 - 10 分钟
kubeadm init --config=kubeadm-config.yaml --upload-certs

# 配置 kubectl
rm -rf /root/.kube/
mkdir /root/.kube/
cp -i /etc/kubernetes/admin.conf /root/.kube/config

# 安装 calico 网络插件
# 参考文档 https://docs.projectcalico.org/v3.8/getting-started/kubernetes/
rm -f calico.yaml
wget https://docs.projectcalico.org/v3.8/manifests/calico.yaml
sed -i "s#192\.168\.0\.0/16#${POD_SUBNET}#" calico.yaml
kubectl apply -f calico.yaml

检查master初始化结果

初始化 worker 节点

获取 join 命令参数

在 master 节点执行

初始化 worker

对所有 worker 节点执行

查看初始化结果

在 master 节点执行

使用 Ingress Controller

安装 Ingress Controller

编辑 mandatory.yaml

将镜像替换成 阿里云的源

https://github.com/kubernetes/ingress-nginx/blob/master/deploy/static/mandatory.yaml

apiVersion: v1
kind: Namespace
metadata:
  name: ingress-nginx
  labels:
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx

---

kind: ConfigMap
apiVersion: v1
metadata:
  name: nginx-configuration
  namespace: ingress-nginx
  labels:
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx

---
kind: ConfigMap
apiVersion: v1
metadata:
  name: tcp-services
  namespace: ingress-nginx
  labels:
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx

---
kind: ConfigMap
apiVersion: v1
metadata:
  name: udp-services
  namespace: ingress-nginx
  labels:
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx

---
apiVersion: v1
kind: ServiceAccount
metadata:
  name: nginx-ingress-serviceaccount
  namespace: ingress-nginx
  labels:
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx

---
apiVersion: rbac.authorization.k8s.io/v1beta1
kind: ClusterRole
metadata:
  name: nginx-ingress-clusterrole
  labels:
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx
rules:
  - apiGroups:
      - ""
    resources:
      - configmaps
      - endpoints
      - nodes
      - pods
      - secrets
    verbs:
      - list
      - watch
  - apiGroups:
      - ""
    resources:
      - nodes
    verbs:
      - get
  - apiGroups:
      - ""
    resources:
      - services
    verbs:
      - get
      - list
      - watch
  - apiGroups:
      - ""
    resources:
      - events
    verbs:
      - create
      - patch
  - apiGroups:
      - "extensions"
      - "networking.k8s.io"
    resources:
      - ingresses
    verbs:
      - get
      - list
      - watch
  - apiGroups:
      - "extensions"
      - "networking.k8s.io"
    resources:
      - ingresses/status
    verbs:
      - update

---
apiVersion: rbac.authorization.k8s.io/v1beta1
kind: Role
metadata:
  name: nginx-ingress-role
  namespace: ingress-nginx
  labels:
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx
rules:
  - apiGroups:
      - ""
    resources:
      - configmaps
      - pods
      - secrets
      - namespaces
    verbs:
      - get
  - apiGroups:
      - ""
    resources:
      - configmaps
    resourceNames:
      # Defaults to "<election-id>-<ingress-class>"
      # Here: "<ingress-controller-leader>-<nginx>"
      # This has to be adapted if you change either parameter
      # when launching the nginx-ingress-controller.
      - "ingress-controller-leader-nginx"
    verbs:
      - get
      - update
  - apiGroups:
      - ""
    resources:
      - configmaps
    verbs:
      - create
  - apiGroups:
      - ""
    resources:
      - endpoints
    verbs:
      - get

---
apiVersion: rbac.authorization.k8s.io/v1beta1
kind: RoleBinding
metadata:
  name: nginx-ingress-role-nisa-binding
  namespace: ingress-nginx
  labels:
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: Role
  name: nginx-ingress-role
subjects:
  - kind: ServiceAccount
    name: nginx-ingress-serviceaccount
    namespace: ingress-nginx

---
apiVersion: rbac.authorization.k8s.io/v1beta1
kind: ClusterRoleBinding
metadata:
  name: nginx-ingress-clusterrole-nisa-binding
  labels:
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: nginx-ingress-clusterrole
subjects:
  - kind: ServiceAccount
    name: nginx-ingress-serviceaccount
    namespace: ingress-nginx

---

apiVersion: apps/v1
kind: Deployment
metadata:
  name: nginx-ingress-controller
  namespace: ingress-nginx
  labels:
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx
spec:
  replicas: 1
  selector:
    matchLabels:
      app.kubernetes.io/name: ingress-nginx
      app.kubernetes.io/part-of: ingress-nginx
  template:
    metadata:
      labels:
        app.kubernetes.io/name: ingress-nginx
        app.kubernetes.io/part-of: ingress-nginx
      annotations:
        prometheus.io/port: "10254"
        prometheus.io/scrape: "true"
    spec:
      # wait up to five minutes for the drain of connections
      terminationGracePeriodSeconds: 300
      serviceAccountName: nginx-ingress-serviceaccount
      nodeSelector:
        kubernetes.io/os: linux
      containers:
        - name: nginx-ingress-controller
          image: registry.aliyuncs.com/google_containers/nginx-ingress-controller:0.26.1
          args:
            - /nginx-ingress-controller
            - --configmap=$(POD_NAMESPACE)/nginx-configuration
            - --tcp-services-configmap=$(POD_NAMESPACE)/tcp-services
            - --udp-services-configmap=$(POD_NAMESPACE)/udp-services
            - --publish-service=$(POD_NAMESPACE)/ingress-nginx
            - --annotations-prefix=nginx.ingress.kubernetes.io
          securityContext:
            allowPrivilegeEscalation: true
            capabilities:
              drop:
                - ALL
              add:
                - NET_BIND_SERVICE
            # www-data -> 33
            runAsUser: 33
          env:
            - name: POD_NAME
              valueFrom:
                fieldRef:
                  fieldPath: metadata.name
            - name: POD_NAMESPACE
              valueFrom:
                fieldRef:
                  fieldPath: metadata.namespace
          ports:
            - name: http
              containerPort: 80
            - name: https
              containerPort: 443
          livenessProbe:
            failureThreshold: 3
            httpGet:
              path: /healthz
              port: 10254
              scheme: HTTP
            initialDelaySeconds: 10
            periodSeconds: 10
            successThreshold: 1
            timeoutSeconds: 10
          readinessProbe:
            failureThreshold: 3
            httpGet:
              path: /healthz
              port: 10254
              scheme: HTTP
            periodSeconds: 10
            successThreshold: 1
            timeoutSeconds: 10
          lifecycle:
            preStop:
              exec:
                command:
                  - /wait-shutdown

---

安装 nginx-ingress-controller

暴露 nginx-ingress 80 443 端口

编辑 ingress-service.yaml

https://raw.githubusercontent.com/kubernetes/ingress-nginx/master/deploy/static/provider/baremetal/service-nodeport.yaml

apiVersion: v1
kind: Service
metadata:
  name: ingress-nginx
  namespace: ingress-nginx
  labels:
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx
spec:
  type: NodePort
  ports:
    - name: http
      port: 80
      targetPort: 80
      protocol: TCP
      nodePort: 80   # http请求对外映射80端口
    - name: https
      port: 443
      targetPort: 443
      protocol: TCP
      nodePort: 443  # https请求对外映射443端口
  selector:
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx

---

修改 nodePort 端口范围

启动 nginx-ingress-service

配置 Ingress 中定义 L7 路由规则

编辑 nfys-ingress.yaml

apiVersion: extensions/v1beta1
kind: Ingress
metadata:
  name: ingress-for-nginx  # Ingress 的名字，仅用于标识
  annotations:
    kubernets.io/ingress.class: "nginx"
spec:
  rules:                      # Ingress 中定义 L7 路由规则
  - http:
#    host: local.test.kinglian.cn   # 根据 virtual hostname 进行路由
      paths:                  # 按路径进行路由
      - path: /
        backend:
          serviceName: nginx-service  # 指定后端的 Service 为之前创建的 nginx-service
          servicePort: 80
      - path: /admin
        backend:
          serviceName: uaas-service  # 指定后端的 Service 为之前创建的 uaas-service
          servicePort: 2019
      - path: /dims
        backend:
          serviceName: dims-service  # 指定后端的 Service 为之前创建的 dims-service
          servicePort: 2021

---

启动 路由规则

配置 harbor 镜像仓库登录验证

1，先用docker登录harbor

登录的用户名密码为在harbor上注册的用户名密码，并且登录用户需要有对应仓库的拉取权限，否则不能访问仓库。登录示例：docker login hub.yxtc.com:8081，登录之后会生成~/.docker/config.json文件，config.json文件内容如下

{
        "auths": {
                "hub.yxtc.com:8081": {
                        "auth": "Y3I3Olh1MTIzNDU2MjU="
                }
        }
}

其中hub.yxtc.com:8081为harbor服务器的地址

2，对config.json进行base64加密

命令如下：

cat ~/.docker/config.json |base64 -w 0
ewoJImF1dGhzIjogewoJCSJyZWdpc3RyeS5raW5nbGlhbi5jbiI6IHsKCQkJImF1dGgiOiAiZW1oaGJtZHRhRHBhYldneE1Ea3pORFE1TWpFPSIKCQl9Cgl9LAoJIkh0dHBIZWFkZXJzIjogewoJCSJVc2VyLUFnZW50IjogIkRvY2tlci1DbGllbnQvMTguMDkuNyAobGludXgpIgoJfQp9

3，创建secret.yaml文件

文件内容如下：

apiVersion: v1
kind: Secret
metadata:
  name: mysecret #后面要引用
data:
  .dockerconfigjson: ewoJImF1dGhzIjogewoJCSJyZWdpc3RyeS5raW5nbGlhbi5jbiI6IHsKCQkJImF1dGgiOiAiZW1oaGJtZHRhRHBhYldneE1Ea3pORFE1TWpFPSIKCQl9Cgl9LAoJIkh0dHBIZWFkZXJzIjogewoJCSJVc2VyLUFnZW50IjogIkRvY2tlci1DbGllbnQvMTguMDkuNyAobGludXgpIgoJfQp9
type: kubernetes.io/dockerconfigjson

4，创建secret

命令如下：

5，新建pod

用imagePullSecrets指定secret，pod的yaml文件示例如下：

  imagePullSecrets:
    - name: mysecret

发布 一个项目

按照下文发布后

1、会运行一个容器

2、并且不会暴露任何端口

3、容器内/opt 会挂在一个nfs存储 对应宿主机的/nfs-share/logs

4、需要通过 ingress 进行调度

编辑 uaas.yaml

apiVersion: extensions/v1beta1     #与k8s集群版本有关，使用 kubectl api-versions 即可查看当前集群支持的版本
kind: Deployment        #该配置的类型，我们使用的是 Deployment
metadata:               #译名为元数据，即 Deployment 的一些基本属性和信息
  name: uaas-deployment        #Deployment 的名称
  labels:           #标签，可以灵活定位一个或多个资源，其中key和value均可自定义，可以定义多组，目前不需要理解
    app: uaas  #为该Deployment设置key为app，value为nginx的标签
spec:           #这是关于该Deployment的描述，可以理解为你期待该Deployment在k8s中如何使用
  replicas: 1   #使用该Deployment创建一个应用程序实例
  selector:         #标签选择器，与上面的标签共同作用，目前不需要理解
    matchLabels: #选择包含标签app:nginx的资源
      app: uaas
  template:         #这是选择或创建的Pod的模板
    metadata:   #Pod的元数据
      labels:   #Pod的标签，上面的selector即选择包含标签app:nginx的Pod
        app: uaas
    spec:           #期望Pod实现的功能（即在pod中部署）
      containers:       #生成container，与docker中的container是同一种
      - name: uaas     #container的名称
        image: registry.demo.cn/prod/nfys-uaas:20191108      #使用镜像创建container
        imagePullPolicy: Always # Always 总是拉取 / IfNotPresent 默认有则不拉 / Never 只使用本地
        ports:
        - containerPort: 2019  #声明镜像端口
        volumeMounts:
        - name: uaas-persistent-storage
          mountPath: /opt #挂在目录 (容器内)
      volumes:
      - name: uaas-persistent-storage
        nfs:
          path: /nfs-share/logs #宿主机目录
          server: 192.168.1.61 #nfs-server
      imagePullSecrets:
      - name: nfys-secret
---

apiVersion: v1
kind: Service
metadata:
  name: uaas-service   #Service 的名称
  labels:       #Service 自己的标签
    app: uaas  #为该 Service 设置 key 为 app，value 为 nginx 的标签
spec:       #这是关于该 Service 的定义，描述了 Service 如何选择 Pod，如何被访问
  selector:         #标签选择器
    app: uaas  #选择包含标签 app:nginx 的 Pod
  ports:
  - name: uaas-port    #端口的名字
    protocol: TCP           #协议类型 TCP/UDP
    port: 2019            #集群内的其他容器组可通过 80 端口访问 Service 集群内其他重启可以通过这个端口访问
    targetPort: 2019      #将请求转发到匹配 Pod 的 80 端口 宿主机暴露的端口 收到的请求转发 容器目标端口

使用 uaas.yaml 发布项目

存储 Volumes

健康检测机制 Pod

LivenessProbe探针：

用于判断容器是否存活，即Pod是否为running状态，如果LivenessProbe探针探测到容器不健康，则kubelet将kill掉容器，并根据容器的重启策略是否重启，如果一个容器不包含LivenessProbe探针，则Kubelet认为容器的LivenessProbe探针的返回值永远成功。

ReadinessProbe探针：

用于判断容器是否启动完成，即容器的Ready是否为True，可以接收请求，如果ReadinessProbe探测失败，则容器的Ready将为False，控制器将此Pod的Endpoint从对应的service的Endpoint列表中移除，从此不再将任何请求调度此Pod上，直到下次探测成功。

原文地址：https://www.cnblogs.com/xuanbao/p/11827104.html