1.常用查看命令
[[email protected] ~]# nmcli device status [[email protected] ~]# nmcli connection show [[email protected] ~]# nmcli device connect ens32 [[email protected] ~]# nmcli device disconnect ens32 [[email protected] ~]# nmcli connection up ens32 [[email protected] ~]# nmcli connection down ens32
2.使用nmcli配置网络
#创建名为new1的新连接 [[email protected] ~]# nmcli connection add con-name new1 ifname ens32 type ethernet #配置new1的IP地址模式为静态及相应的IP [[email protected] ~]# nmcli connection modify new1 ipv4.method manual ipv4.addresses192.168.1.1/24 ipv4.gateway 192.168.1.254 #设置连接自动启动 [[email protected] ~]# nmcli connection modify new1 connection.autoconnect yes #设置为动态获取IP地址 [[email protected] ~]# nmcli connection modify new1 ipv4.method auto #使配置文件生效（两者都可以） [[email protected] ~]# systemctl restart network [[email protected] ~]# nmcli connection reload
3.删除new1连接
[[email protected] ~]# nmcli connection delete new1
时间： 2024-12-21 05:52:20