Turn off SAAB day running lights using GM Tech2 diagnostic tool

This guide works on my 2004 SAAB, but I have not tried it out on other models, so I can not guarantee how it works out, hope it will work for you as it did for me.

Required things:
GM Tech2 scanner for GM and SAAB
32MB PCMCIA Card for Tech2
OBDII port adapter

Instruction:
Insert the 32MB SAAB card into GM Tech2 tool slot
Connect Tech2 diagnostic tool using OBDII port adapter
Screen of Tech2 scan tool will then light up
Go to Diagnostic Mode
Select Diag, then year of made 2004, model 9-3 Sport Select Body and then Exterior Lighting and Horn
Low beam adjustments
F0. Auto Low Beam also in Pos 0
Change setting to NO
The lights will then flicker and go out
Select Exit
Go to Fog Lights Front
Change to Position 1 & 2 ROW (Rest of World) Program
As you can see, the light settings are changed to:

Pos 0> No Lights
Pos1> Fogs and 5 Watt Headlamp / Parking Light
Pos3> Low Beam, High Beam, Manual Control of Fogs
 
Disconnect Tech2 scanner when finish.

时间： 2024-10-09 03:43:22

Turn off SAAB day running lights using GM Tech2 diagnostic tool的相关文章

Post Advice of GM MDI diagnostic tool for sharing

Having read thousands of posts about GM MDI diagnostic tool, and finally get some useful tips . I need some things cleared up before I purchase an MDI interface kit. Firstly, I understand that the MDI multiple can program all modules on the Holden/Op

Steps to disable DRLs with GM Tech2 scanner

It is possible to get daytime running time disabled manually. But the problem can be easily settled with a scanner. GM Tech2scanner is ultimate best choice for GM group. Tool needed: GM Tech2 scan tool Vehicle model example: 2003 Chevrolet Cavalier 1

Set up the security access with GM TECH2 procedure

Note: detailed procedure with full pictures is at the last paragraph. Where to buy GM TECH2? The knock off GM tech2 can cost $340 to $290, usually, the more expensive the better quality. I bought this one on sale $299: http://www.wobd2.com/wholesale/

How to turn the lamp outage off with Ford VCM II IDS diagnostic tool

For 2008-2010 model years, the function of the turn signal flasher was incorporated into the software of the Smart Power Distribution Junction Box (SPDJB or SJB). The SJB is configured to provide lamp-outage indication on all F250 / 350/450 / 550. Fo

GM Tech 2: A Real China Diagnostic Tool

As the most powerful diagnostic tool for GM vehicles, GM Tech 2 has won for itself many car fans. Additionally, it is still available to do diagnosis for SAAB, OPEL, SUZUKI and more. What GM Tech 2 does? I just performed a CKP sensor relearn and it w

How to program Coverlet ECBM with GM Tech 2 diagnostic scan tool

If ESC (Electronic Stability Control) DTC C0460, C0280 or C0196 etc displays on Driver Information Center (DIC) or you get the ECBM module replaced, you need to perform steering angel sensor calibration. In this case, you need to1) Use SPS (Service P

How to solve GM MDI cannot complete the installation

Dear Joy, I have a problem using GM MDI diagnostic tool. When I installed it on my laptop, the tool prompted me a “fatal error (6)”. The Description reads that “Cannot complete the installation. For details please check the installation log and conta

Foxwell NT510 Scanner Feedback on VW Audi (diagnose program adapt function)

Got one Foxwell NT510 Multi-System Scanner from an authorized dealer, I did some test and will put my report below for your reference. Below are Foxwell NT510 Multi-System Scanner good Review: - I could see so much information about my car that I wan

How to install daytime running lamp (DRL) on W164

I want to install daytime running lamp (DRL) on my W164. It has advanced fog lights and they turn on when you turn the wheel. When I activate day running lights (in SAM module) it turns the low beam light on. Using Star Diagnosis, I changed low beam