驱动微雪公司的3.2寸（原创）

前两天到手一块树莓派3B+，感觉板子不错，有点搞头，就在某宝上淘了一块微雪的屏。看起来还不错，然后就搞了起来。

再讲之前，先说一下参考文档:

微雪官方：http://www.waveshare.net/wiki/3.2inch_RPi_LCD_(B)

静态ip设置：http://jingyan.baidu.com/article/9158e00056cdc0a255122879.html

由于微雪的官方驱动和网卡驱动有冲突，所以我们不能按照官方的步骤来做。

一。把网卡配置文件替换/etc/network/interfaces

 1 # interfaces(5) file used by ifup(8) and ifdown(8)
 2
 3 # Please note that this file is written to be used with dhcpcd
 4 # For static IP, consult /etc/dhcpcd.conf and ‘man dhcpcd.conf‘
 5
 6 # Include files from /etc/network/interfaces.d:
 7 source-directory /etc/network/interfaces.d
 8
 9 auto lo
10 iface lo inet loopback
11
12 # iface eth0 inet dhcp
13
14 auto ethiface eth0 inet static
15 address  192.168.0.20      ## 设定的静态IP地址
16 netmask 255.255.255.0    ## 网络掩码
17 gateway 192.168.0.1          ## 网关
18
19
20 allow-hotplug wlan0
21 iface wlan0 inet manual
22     wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
23
24 allow-hotplug wlan1
25 iface wlan1 inet manual
26     wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf

二。安装脚本：

 1 #!/bin/sh
 2 wget http://www.waveshare.net/w/upload/9/95/LCD-show-160813.tar.gz
 3
 4 chmod +777 LCD-show-160813.tar.gz
 5
 6 tar vzxf LCD-show-160813.tar.gz
 7
 8 sudo su
 9
10 cp LCD-show /root/ -r
11
12 cd
13
14 cd LCD-show/
15
16  ./LCD32-show