Host Controller transport layer and AMPs

The logical Host Controller Interface does not consider multiplexing/routing over the Host Controller Transport Layer(s). The Host designer must consider this in deciding which of the multiple controller configurations it will
support. Each logical AMP HCI installation is particular to a single AMP Controller. The Host shall direct each HCI Command to a specific AMP, and be aware of the source of each HCI Event, and manage flow control separately for each HCI. The Host‘s Controller_ID
concept used for AMP enumeration may assist with this.

The logical HCI definition does not consider the initial discovery of what AMPs are present in the system.

The upper layers discover the AMP capabilities. As seen by the AMP Manager, each local AMP has a Controller_ID that is used to route the data and commands to the correct AMP Controller. This identifier is not used in AMP HCI.

The separate logical HCIswithin a system may be on the same physical HCI transport, on separate physical HCI transports, or any combination. This may require a layer of multiplexing, which isnot defined within this AMP HCI logical
specification.

The logical HCI is not affected by this topology. The logical HCI definition describes commands and events as seen by a single AMP.

时间： 2024-07-31 14:33:12

Host Controller transport layer and AMPs的相关文章

Using a USB host controller security extension for controlling changes in and auditing USB topology

Protecting computer systems from attacks that attempt to change USB topology and for ensuring that the system's information regarding USB topology is accurate is disclosed. A software model is defined that, together with secure USB hardware, provides

[Computer Networking] {CMU14-740} Lecture 9: The Transport Layer; UDP

This is the first lecture in a series exploring the Transport layer. This layer is responsible for logical communication between applications running on (usually) different hosts. As such, it is designed with careful consideration for the requirement

网络安全——传输层安全协议(Transport Layer Security) TLS/SSL

网络安全——传输层安全协议(Transport Layer Security) TLS/SSL 1. 综述 TLS/SSL用于认证和加密. TLS/SSL的核心在于公钥和私钥,公钥在安全证书中. 公钥和私钥成对出现,通信个体的公钥公开,私钥则严格保密,只有自己知道:有下面的特性: 1. 公钥加密的数据只能由私钥解密: 2. 私钥加密的数据只能由公钥解密. A用私钥加密后,其他人尝试用A的公钥解密可以判断是否是A发出的数据:发给A的数据用A的公钥加密,则只有A能读取. 2. 对称密码和非对称密码

VMWARE里启动kylin16.0时出现'SMBus Host Controller not enabled'(还未进入系统）

在Vmware里安装完Ubuntu16.10,启动时出现'SMBus Host Controller not enabled'错误提示,进不到图形界面.网上搜了一下,解决办法是在图形界面里进终端窗口,编辑blacklist.conf文件,禁止i2c_piix4驱动的加载.但现在系统还没加载完,进不去终端窗口,如何处理呢? 解决办法如下(亲测可用): 在虚拟机上运行Linux内核版本为4.7或以上的系统都在安装过程中或在启动时会因为加载intel_powerclamp驱动而导致崩溃.解决办法:1.

SSL/TLS(Secure Sockets Layer / Transport Layer Security)

# 协议概述 缩写 名称 默认端口 安全策略 描述 HTTP Hyper Text Transfer Protocol(超文本传输协议) TCP80 HTTP 协议是明文的,传输内容会被嗅探和篡改. 客户端浏览器或其他程序与Web服务器之间的应用层通信协议 SSL/TLS Secure Sockets Layer(安全套接层)Transport Layer Security(传输层安全) TCP443 1)认证用户和服务器,确保数据发送到正确的客户机和服务器: 2)加密数据以防止数据中途被窃取:

USB - Open Host Controller Operational Registers

The Host Controller (HC) contains a set of on-chip operational registers which are mapped into a noncacheable portion of the system addressable space. These registers are used by the Host Controller Driver (HCD). According to the function of these re

Network 3: Transport Layer

Some of the primary issues regarding the transport layer are listed in the following picture. In Internet, there are two dominant transport layer protocols. One is User Datagram Protocol (UDP), an unreliable service that can only implement multiplexi

Transport layer and Network layer

http://stackoverflow.com/questions/13333794/networking-difference-between-transport-layer-and-networking-layer Transport Layer: The fourth and “middle” layer of the OSI Reference Model protocol stack is the transport layer. I consider the transport l

加载ubuntu的时候卡在‘SMBus Host Controller not enabled'错误

实验系统:ubuntu-16.04.6-server-amd64 我在VMware安装完这个系统后进入发现卡在了’SMBus Host Controller not enabled‘里,后来查过网络发现,需要禁止i2c_piix4驱动的加载,禁止需要编辑blacklist.conf: 方法如下: 1.在ubuntu开机时进入grub启动选项 2.选择Advanced options for Ubuntu 3.进入Ubuntu的恢复模式(recovery mode) 4.在Recovery Men